| 1 | { |
| 2 | "ExtensionPromptUnavailable": "擴充功能指令無法使用；請透過 /plugin show 查看。", |
| 3 | "ComposerOversizedSubmitHeld": "未傳送：訊息超過 {limit} 個字元，無法儲存為貼上文字檔案（{error}）。完整文字仍保留在輸入框中：請縮短內容，或允許寫入 .codewhale/pastes，然後再次按 Enter。", |
| 4 | "ComposerOversizedSubmitHeldShort": "未傳送：超過 {limit} 個字元；貼上檔案未儲存。", |
| 5 | "CmdPluginOwnerReport": "擴充功能主機：\n 狀態：{state}\n 活動工具（{count}）：{tools}", |
| 6 | "CmdPluginOwnerActivating": "正在啟用", |
| 7 | "CmdPluginOwnerActive": "已啟用", |
| 8 | "CmdPluginOwnerFailed": "失敗：{reason}", |
| 9 | "CmdPluginOwnerFaulted": "故障：{reason}", |
| 10 | "CmdPluginOwnerRevoked": "已撤銷", |
| 11 | "CmdPluginOwnerInactive": "未啟用", |
| 12 | "MobileStreamReplayFailed": "Runtime 無法讀取此對話的歷史記錄 — 正在重試", |
| 13 | "MobileStreamCatchUpFailed": "Runtime 處理落後且無法追趕 — 正在重試", |
| 14 | "MobileStreamRuntimeShutdown": "Runtime 正在關閉 — 正在重新連線", |
| 15 | "MobileStreamEnded": "Runtime 已結束事件串流 — 正在重新連線", |
| 16 | "MobileStreamClosed": "Runtime 已關閉此對話的事件串流；請重新開啟對話", |
| 17 | "MobileStreamReconnecting": "連線已中斷；正在重新連線", |
| 18 | "MobileStreamConnected": "已連線", |
| 19 | "PetHabitatTitle": "CODEWHALE / WHALESONG · 共享棲息地", |
| 20 | "PetHabitatHints": "{back} 返回 · {sound} 聲音 · {browser} 外觀 · {window} 視窗", |
| 21 | "PetHabitatQueued": "已傳送至共享棲息地。使用 /pet on 開啟全螢幕檢視。", |
| 22 | "PetWatchSoundOn": "聲音已開啟", |
| 23 | "PetWatchSoundOff": "聲音已關閉", |
| 24 | "PetWatchSoundPaused": "聲音已暫停", |
| 25 | "PetWatchSoundUnavailable": "Codewhale 聲音已停止。請檢查 FFmpeg (ffplay) 和音訊輸出，然後重新開啟聲音。", |
| 26 | "CmdPetDescription": "工作時把畫面交給 Codewhale 寵物", |
| 27 | "PetModeOn": "寵物模式已開啟。Codewhale 工作時棲息地佔據畫面；Esc 返回輸入框。", |
| 28 | "PetModeOff": "寵物模式已關閉。寵物繼續住在伴侶程式裡；/pet 重新開啟。", |
| 29 | "PetModeOnLabel": "寵物模式開", |
| 30 | "PetModeOffLabel": "寵物模式關", |
| 31 | "PetViewOpen": "棲息地已開啟", |
| 32 | "PetViewClosed": "棲息地已關閉", |
| 33 | "PetWatchRestored": "/pet 已還原此工作階段的棲息地，正在等待新的遙測資料。", |
| 34 | "PetWatchStorageUnavailable": "Watch 無法還原或儲存此棲息地。現有檔案已保留。使用 {command} 匯出本次執行。", |
| 35 | "PetWatchExported": "Watch 重播已儲存：{path}", |
| 36 | "PetWatchExportFailed": "無法儲存 Watch 重播，記錄仍保留在記憶體中。", |
| 37 | "PetWatchExportQueued": "正在儲存 Watch 重播…", |
| 38 | "PetWatchExportUnavailable": "請在已儲存的工作階段中開啟 /pet，或等待目前的匯出完成。", |
| 39 | "PetUnobserved": "休息中", |
| 40 | "PetOffline": "離線 — 執行 codewhale pet serve 喚醒它", |
| 41 | "PetDozing": "打盹", |
| 42 | "PetWatchUnavailable": "寵物遙測已暫停。/pet on 重試。", |
| 43 | "ConversationChangedBeforeUndo": "復原完成前，對話已發生變更。未復原任何內容，也未送出重試請求。請先檢查目前的對話，再重試。", |
| 44 | "SessionArchiveExported": "工作階段已匯出", |
| 45 | "SessionArchiveSizes": "項目數 / 未壓縮大小 / 封存大小", |
| 46 | "SessionArchiveNoArtifacts": "此工作階段沒有一般產物檔案。", |
| 47 | "SessionArchiveRestoreHint": "使用 /load <session.json> 開啟解壓縮後的記錄；/resume 僅匯入對話。解壓縮後的產物仍保留為獨立檔案。", |
| 48 | "ExtensionsActionAdd": "新增", |
| 49 | "ExtensionsActionEnable": "啟用", |
| 50 | "ExtensionsActionEdit": "編輯", |
| 51 | "ExtensionsHooksAddLabel": "新增掛鉤", |
| 52 | "ExtensionsHooksAddDescription": "在你的編輯器中開啟本專案的掛鉤檔案", |
| 53 | "ExtensionsActionReload": "重新載入", |
| 54 | "ExtensionsActionConnect": "連線", |
| 55 | "ExtensionsActionReconnect": "重新連線", |
| 56 | "ExtensionsActionReauth": "重新登入", |
| 57 | "ExtensionsActionDiagnose": "診斷", |
| 58 | "ExtensionsActionManage": "管理", |
| 59 | "ExtensionsActionFocus": "焦點", |
| 60 | "ExtensionsActionFold": "摺疊", |
| 61 | "ExtensionsActionTabs": "分頁", |
| 62 | "ExtensionsCompatibilityFull": "完整", |
| 63 | "ExtensionsCompatibilityPartial": "部分", |
| 64 | "ExtensionsGroupBuiltIn": "內建", |
| 65 | "ExtensionsGroupConfigured": "已設定", |
| 66 | "ExtensionsGroupProblems": "問題", |
| 67 | "ExtensionsGroupRecommended": "推薦", |
| 68 | "ExtensionsGroupServers": "伺服器", |
| 69 | "ExtensionsGroupNeedsAttention": "需要處理", |
| 70 | "ExtensionsGroupNeedsLogin": "需要登入", |
| 71 | "ExtensionsGroupStatus": "{count} 項 · 按 Enter 摺疊", |
| 72 | "ExtensionsGroupUser": "使用者", |
| 73 | "ExtensionsGroupWorkspace": "工作區", |
| 74 | "ExtensionsHookDetail": "逾時：{timeout}秒 · 背景：{background} · 發生錯誤後繼續：{continue_on_error}", |
| 75 | "ExtensionsHookFallback": "{event} 掛鉤", |
| 76 | "ExtensionsHooksConfiguration": "掛鉤設定", |
| 77 | "ExtensionsInventoryAgents": "代理：{count}", |
| 78 | "ExtensionsInventoryCommands": "指令：{count}", |
| 79 | "ExtensionsInventoryHooks": "掛鉤：{count}", |
| 80 | "ExtensionsInventoryMcp": "MCP：{count}", |
| 81 | "ExtensionsInventoryNone": "沒有支援的元件", |
| 82 | "ExtensionsInventorySkills": "技能：{count}", |
| 83 | "ExtensionsMarketplaceDetail": "發行者：{publisher} · 級別：{tier} · 可安裝：{installable}", |
| 84 | "ExtensionsMarketplaceUnavailable": "外掛市集儲存空間無法使用", |
| 85 | "ExtensionsMcpEmpty": "尚未設定 MCP 伺服器", |
| 86 | "ExtensionsMcpBrowse": "瀏覽推薦伺服器", |
| 87 | "ExtensionsMcpDetail": "工具：{tools} · 資源：{resources} · 提示詞：{prompts}", |
| 88 | "ExtensionsMcpNotInspected": "此快照中尚未檢查 · 按 Enter 重新載入並連線已設定的伺服器", |
| 89 | "ExtensionsMcpRefresh": "已設定 {count} 個 MCP 伺服器；開啟 /mcp 重新整理此快照", |
| 90 | "ExtensionsMcpSummary": "{transport} · 工具：{tools} · 資源：{resources}", |
| 91 | "ExtensionsNoItems": "此分頁沒有項目", |
| 92 | "ExtensionsNoMatches": "沒有符合「{query}」的項目", |
| 93 | "ExtensionsPluginDetail": "{inventory} · 信任：{trust} · 相容性：{compatibility} · 診斷：{diagnostics}", |
| 94 | "ExtensionsProductChromeDescription": "透過官方 MCP 檢查並控制本機 Chrome 工作階段。", |
| 95 | "ExtensionsProductDetail": "發行者：{publisher} · 元件：{components} · 來源：{source}", |
| 96 | "ExtensionsProductPlaywrightDescription": "以 Microsoft Playwright MCP 為基礎的瀏覽器自動化。", |
| 97 | "ExtensionsProductCodewhaleComputerUseDescription": "看見螢幕並操作它：以無障礙介面為先的控制、螢幕擷取、縮放與錄影，還可透過 ssh 操作遠端電腦。", |
| 98 | "ExtensionsStateFirstParty": "隨 Codewhale 內建", |
| 99 | "ExtensionsSearchLabel": "搜尋： ", |
| 100 | "ExtensionsSkillRootCompatibleGlobal": "相容的全域目錄（{harness}）", |
| 101 | "ExtensionsSkillRootCompatibleProject": "相容的專案目錄（{harness}）", |
| 102 | "ExtensionsSkillRootConfigured": "已設定目錄", |
| 103 | "ExtensionsSkillRootGlobal": "Codewhale 全域技能", |
| 104 | "ExtensionsSkillRootProject": "Codewhale 專案技能", |
| 105 | "ExtensionsSkillRootRegistryCache": "登錄快取", |
| 106 | "ExtensionsSkillRootReviewedPlugin": "已審查外掛", |
| 107 | "ExtensionsStateAvailable": "可用", |
| 108 | "ExtensionsStateConnected": "已連線", |
| 109 | "ExtensionsStateEnabled": "已啟用", |
| 110 | "ExtensionsStateError": "錯誤", |
| 111 | "ExtensionsStateInactive": "未啟用", |
| 112 | "ExtensionsStateInapplicable": "不適用", |
| 113 | "ExtensionsStateInvalid": "無效", |
| 114 | "ExtensionsStateNotInspected": "尚未檢查", |
| 115 | "ExtensionsStateDisconnected": "已中斷", |
| 116 | "ExtensionsStateRejected": "已拒絕", |
| 117 | "ExtensionsStateReviewedCandidate": "已審查候選", |
| 118 | "ExtensionsStateUnderEvaluation": "評估中", |
| 119 | "ExtensionsStateUnstaged": "尚未暫存", |
| 120 | "ExtensionsStateUnsupported": "不支援", |
| 121 | "ExtensionsStateWarning": "警告", |
| 122 | "ExtensionsTabHooks": "掛鉤", |
| 123 | "ExtensionsTabMarketplace": "外掛市集", |
| 124 | "ExtensionsTabMarketplaceCompact": "市集", |
| 125 | "ExtensionsTabPlugins": "外掛", |
| 126 | "ExtensionsTierCommunity": "社群", |
| 127 | "ExtensionsTierCurated": "精選", |
| 128 | "ExtensionsTierOfficial": "官方", |
| 129 | "ExtensionsTierPartner": "合作夥伴", |
| 130 | "ExtensionsTitle": "擴充功能", |
| 131 | "ExtensionsTrustCapabilitiesChanged": "功能已變更", |
| 132 | "ExtensionsTrustContentChanged": "內容已變更", |
| 133 | "ExtensionsTrustNotReviewed": "未審查", |
| 134 | "ExtensionsTrustTrusted": "受信任", |
| 135 | "ExtensionsValueNo": "否", |
| 136 | "ExtensionsValueYes": "是", |
| 137 | "ComposerPlaceholder": "輸入訊息…", |
| 138 | "ComposerPlaceholderFollowUp": "輸入後續訊息…", |
| 139 | "ComposerPlaceholderSendNow": "Enter 立即傳送 · 再輸入一則", |
| 140 | "ComposerHintSendWithQueue": "↵ 傳送（{count} 則等待）", |
| 141 | "ComposerHintQueue": "↵ 本回合結束後傳送", |
| 142 | "ComposerHintQueueWithCount": "↵ 本回合結束後傳送（{count} 則等待）", |
| 143 | "ComposerHintOfflineQueue": "↵ 先儲存", |
| 144 | "ComposerHintOfflineConnect": "↵ 先儲存 · /provider 連線", |
| 145 | "ComposerHintSendNow": "↵ 立即傳送", |
| 146 | "ComposerHintSendIntoTurn": "↵ 送進本回合", |
| 147 | "PendingSendingIntoTurnPrefix": " ↳ 正在送進本回合： ", |
| 148 | "PendingCouldNotSendIntoTurnPrefix": " ↳ 留待下一回合： ", |
| 149 | "PendingEditingFollowUpPrefix": " ↳ 正在編輯後續訊息： ", |
| 150 | "PendingQueuedOnePrefix": "已排隊 #1： ", |
| 151 | "PendingQueuedManyPrefix": "已排隊 {count} · 下一則： ", |
| 152 | "PendingSendNowControls": "Enter 立即傳送 · {key} 編輯上一則", |
| 153 | "PendingSendNowDropControls": "Enter 立即傳送 · {key} 編輯 · /queue drop 1", |
| 154 | "PendingEscRestore": " Esc 還原已排隊的後續訊息", |
| 155 | "PendingQueuedFollowUpPrefix": " ↳ 排隊後續 #{number}： ", |
| 156 | "PendingInputsHeader": "待傳送", |
| 157 | "PendingContextHeader": "下次傳送的上下文", |
| 158 | "ToastQueuedFollowUp": "已排隊。本回合結束後傳送。", |
| 159 | "ToastQueuedFollowUpCount": "已排隊（{count} 則等待）。本回合結束後傳送。", |
| 160 | "ToastQueuedOffline": "已儲存。連接供應商後再傳送。", |
| 161 | "ToastSentIntoTurn": "已送進本回合。", |
| 162 | "ToastCouldNotSendIntoTurn": "未能送進本回合；仍留在佇列。", |
| 163 | "ToastHookBlockedFollowUp": "掛鉤攔截了後續訊息；仍留在佇列。", |
| 164 | "ToastOfflineQueuedCount": "離線：已儲存 {count} 則。", |
| 165 | "ComposerDispatchFailedRestored": "訊息未傳送（{error}）；已還原到輸入框。", |
| 166 | "DispatchFailedQueued": "傳送失敗（{error}）；保留了 {count} 個排隊後續訊息。", |
| 167 | "DispatchFailedInitial": "初始提示無法傳送：{error}", |
| 168 | "HistorySearchPlaceholder": "搜尋提示歷史...", |
| 169 | "HistorySearchTitle": "歷史搜尋", |
| 170 | "HistoryHintMove": "Up/Down 移動", |
| 171 | "HistoryHintAccept": "Enter 接受", |
| 172 | "HistoryHintRestore": "Esc 還原", |
| 173 | "HistoryNoMatches": " 無相符", |
| 174 | "TranscriptReasoningExpand": "展開", |
| 175 | "TelemetryNoticeDefaultOn": "使用統計預設開啟。 向 Codewhale 和資料處理方 PostHog 分享版本/平台、工作階段、功能和錯誤的彙總計數。不收集內容或 IP。docs/TELEMETRY.md 關閉： codewhale config set telemetry false", |
| 176 | "TelemetryNoticeHeadline": "Codewhale 使用統計", |
| 177 | "TelemetryNoticeBody": "Codewhale 只統計：您執行的版本、作業系統和 CPU 系列、工作階段時間和結果，\n以及彙總的功能和錯誤計數。\n\n它絕不會收集您的對話、程式碼、提示詞、檔案、儲存庫名稱或分支名稱、\n模型內容或憑證，也絕不會傳送逐回合或逐工具記錄的代理活動。\n\n系統只使用儲存在此機器上的隨機 ID 來識別您，該 ID 每 90 天更換一次。\n您可以隨時更改：\n codewhale config set telemetry false\n\n逐欄位完整結構：docs/TELEMETRY.md\n\n使用統計預設開啟。 設定傳送後，Codewhale 和 PostHog 會處理這些計數。不收集 IP。", |
| 178 | "TelemetryNoticeCompactBody": "統計：版本、系統/處理器、工作階段時間/結果、功能/錯誤總數。\n隨機本機識別碼每 90 天更換。\n絕不收集：對話/程式碼/提示詞/檔案/名稱、模型內容/憑證、逐回合/工具記錄的活動。\n結構：docs/TELEMETRY.md\n關閉：codewhale config set telemetry false\n使用統計預設開啟。 設定傳送後，Codewhale 和 PostHog 會處理這些計數。不收集 IP。", |
| 179 | "TelemetryNoticeChoiceKeep": "是，保留匿名使用統計", |
| 180 | "TelemetryNoticeChoiceDisable": "不，關閉匿名統計", |
| 181 | "TelemetryNoticeActionChoose": "選擇", |
| 182 | "TelemetryNoticeActionConfirm": "確認", |
| 183 | "TelemetryNoticeActionExit": "離開", |
| 184 | "TelemetryNoticeReceiptEnabled": "匿名使用統計已開啟。絕不收集對話或程式碼。可在 /settings 中更改；完整結構：docs/TELEMETRY.md", |
| 185 | "TelemetryNoticeReceiptDisabled": "匿名使用統計已關閉。之後不會再次詢問。", |
| 186 | "TelemetryNoticeReceiptEnabledUnsaved": "此工作階段已開啟匿名使用統計。Codewhale 無法儲存此提示，因此會再次顯示。可在 /settings 中更改；完整結構：docs/TELEMETRY.md", |
| 187 | "TelemetryNoticeReceiptDisabledUnsaved": "此工作階段已關閉匿名使用統計。Codewhale 無法儲存此選擇，因此下次啟動時會再次詢問。", |
| 188 | "TelemetryPreferenceEnabledNextLaunch": "匿名使用統計將在下次啟動時開啟。絕不收集對話或程式碼。", |
| 189 | "TelemetryPreferenceDisabled": "匿名使用統計已關閉。本機遙測資料已清除。", |
| 190 | "TelemetryPreferenceDisabledWithWarning": "匿名使用統計已關閉，但部分清理需要注意：{detail}", |
| 191 | "TelemetryPreferenceDisabledForSession": "此工作階段已關閉匿名使用統計，但偏好未儲存，下次啟動時可能恢復：{detail}", |
| 192 | "TelemetryPreferenceSaveFailed": "無法安全更改遙測偏好：{detail}", |
| 193 | "StatusPickerTitle": " 狀態列 ", |
| 194 | "StatusPickerInstruction": "選擇要在底部顯示的項目:", |
| 195 | "StatusPickerActionToggle": "切換 ", |
| 196 | "StatusPickerActionAll": "全部 ", |
| 197 | "StatusPickerActionNone": "無 ", |
| 198 | "StatusPickerActionSave": "儲存 ", |
| 199 | "StatusPickerActionCancel": "取消 ", |
| 200 | "HotbarSetupTitle": " Hotbar 設定 ", |
| 201 | "HotbarSetupSourceApp": "應用", |
| 202 | "HotbarSetupSourceSlash": "斜線指令", |
| 203 | "HotbarSetupSourceMcp": "MCP", |
| 204 | "HotbarSetupSourceSkill": "技能", |
| 205 | "HotbarSetupSourcePlugin": "外掛", |
| 206 | "HotbarSetupStatusDisabled": "不可用", |
| 207 | "HotbarSetupStatusPrefill": "預填", |
| 208 | "HotbarSetupStatusReady": "就緒", |
| 209 | "HotbarSetupDirtyModified": "已修改", |
| 210 | "HotbarSetupDirtyClean": "未修改", |
| 211 | "HotbarSetupNoAction": "無操作", |
| 212 | "HotbarSetupConfirmDisable": "停用 Hotbar 並清空所有插槽？(y/n)", |
| 213 | "HotbarSetupStatusLine": "槽位 {slot} | {action} | {dirty}", |
| 214 | "HotbarSetupSlotOutOfRange": "Hotbar 槽位 {slot} 超出 1-{max}", |
| 215 | "HotbarSetupNoActionSelected": "未選擇操作。", |
| 216 | "HotbarSetupCannotAssign": "{action} 無法分配：{reason}", |
| 217 | "HotbarSetupNoActions": "沒有可用的 Hotbar 操作。", |
| 218 | "HotbarSetupRecommended": "薦", |
| 219 | "HotbarSetupEmptySlot": "空", |
| 220 | "HotbarSetupHelp": "Tab/Shift+Tab 來源 Up/Down 操作 1-8 槽位 Enter 分配 Space 切換 Delete 清除 s 儲存 Esc 取消", |
| 221 | "HotbarActionVoiceToggleName": "語音輸入", |
| 222 | "HotbarActionVoiceToggleDescription": "切換終端麥克風語音擷取。", |
| 223 | "HotbarActionSessionCompactName": "壓縮工作階段", |
| 224 | "HotbarActionSessionCompactDescription": "壓縮目前對話上下文。", |
| 225 | "HotbarActionModePlanName": "Plan 模式", |
| 226 | "HotbarActionModePlanDescription": "先規劃再行動。", |
| 227 | "HotbarActionModeAgentName": "Work 模式", |
| 228 | "HotbarActionModeAgentDescription": "在目前工作階段直接工作。", |
| 229 | "HotbarActionModeYoloName": "完整存取 (Work)", |
| 230 | "HotbarActionModeYoloDescription": "相容項：Work 模式 + 完整存取權限（不是獨立模式）。", |
| 231 | "HotbarActionReasoningCycleName": "切換思考強度", |
| 232 | "HotbarActionReasoningCycleDescription": "輪換目前供應商設定的思考強度。", |
| 233 | "HotbarActionReasoningCycleAutoDisabled": "思考強度由自動模型路由控制。", |
| 234 | "HotbarActionSidebarToggleName": "切換側邊欄", |
| 235 | "HotbarActionSidebarToggleDescription": "顯示或隱藏側邊欄。", |
| 236 | "HotbarActionFileTreeToggleName": "切換檔案樹", |
| 237 | "HotbarActionFileTreeToggleDescription": "顯示或隱藏工作區檔案樹。", |
| 238 | "HotbarActionPaletteOpenName": "指令面板", |
| 239 | "HotbarActionPaletteOpenDescription": "開啟指令面板。", |
| 240 | "HotbarActionTrustToggleName": "切換信任", |
| 241 | "HotbarActionTrustToggleDescription": "啟用或停用工作區信任模式。", |
| 242 | "ConfigTitle": "設定", |
| 243 | "ConfigPreviewLabel": "預覽: ", |
| 244 | "ConfigHintExternalCredentials": "該供應商可讀取的憑證檔案、存取層級，以及如何撤銷。", |
| 245 | "ConfigModalTitle": " 設定 ", |
| 246 | "ConfigSearchPlaceholder": "輸入以篩選", |
| 247 | "ConfigNoSettings": " 沒有可用設定。", |
| 248 | "ConfigNoMatchesPrefix": " 沒有相符設定: ", |
| 249 | "ConfigFilteredSettings": " 已篩選設定", |
| 250 | "ConfigShowing": " 顯示", |
| 251 | "ConfigFooterDefault": " 輸入=篩選, Up/Down=選擇, Enter=編輯, Esc=關閉 ", |
| 252 | "ConfigFooterScrollable": " 輸入=篩選, Up/Down=選擇, Enter=編輯, PgUp/PgDn=捲動, Esc=關閉 ", |
| 253 | "ConfigFooterFiltered": " 輸入=篩選, Backspace=刪除, Ctrl+U/Esc=清除, Enter=編輯 ", |
| 254 | "ConfigSectionProvider": "供應商", |
| 255 | "ConfigSectionModel": "模型", |
| 256 | "ConfigSectionPermissions": "權限", |
| 257 | "ConfigSectionNetwork": "網路", |
| 258 | "ConfigSectionDisplay": "顯示", |
| 259 | "ConfigSectionComposer": "編輯器", |
| 260 | "ConfigSectionSidebar": "側邊欄", |
| 261 | "ConfigSectionHistory": "歷史", |
| 262 | "ConfigSectionMcp": "MCP", |
| 263 | "ConfigSectionFleet": "Fleet", |
| 264 | "ConfigSectionWorkflow": "工作流程", |
| 265 | "ConfigSectionSession": "工作階段", |
| 266 | "ConfigSectionLegacy": "舊版", |
| 267 | "ConfigSectionExperimental": "實驗", |
| 268 | "ConfigScopeSession": "工作階段", |
| 269 | "ConfigScopeSaved": "已儲存", |
| 270 | "ConfigCommandSource": "{value}（來源：{source}）", |
| 271 | "ConfigCommandInvalidValue": "{key} 的值「{value}」無效。可用值：{choices}。", |
| 272 | "ConfigSearchUpdated": "search.provider = {value}（{scope}；後續 web_search 呼叫使用實際生效的供應商）", |
| 273 | "ConfigPromptSuggestionUpdated": "prompt_suggestion = {value}（{scope}；輸入建議從下一回合起生效）", |
| 274 | "ConfigNotificationsSetHint": "使用 /config notifications <key> <value> [--save] 設定。", |
| 275 | "ConfigNotificationUpdated": "notifications.{key} = {value}（{scope}；套用於後續通知）", |
| 276 | "ConfigNotificationsWholeNumber": "notifications.threshold_secs 必須是整數", |
| 277 | "ConfigAuditSearchProvider": "寫入 [search] provider；後續 web_search 仍會遵循環境變數覆寫。", |
| 278 | "ConfigAuditPromptSuggestion": "寫入頂層 prompt_suggestion；幽靈文字提示仍須主動啟用。", |
| 279 | "ConfigAuditNotifications": "寫入 [notifications] 純量值，並套用於後續的回合完成通知。", |
| 280 | "ConfigHelpDiscoverable": " 可查詢的 config.toml 鍵：`/config search.provider`、`/config prompt_suggestion`、`/config notifications`。使用 `--save` 永久儲存。", |
| 281 | "ConfigEditCancelled": "編輯已取消", |
| 282 | "ConfigEditTitlePrefix": "編輯 ", |
| 283 | "ConfigEditScopeLabel": "範圍: ", |
| 284 | "ConfigEditCurrentLabel": "目前: ", |
| 285 | "ConfigEditHintLabel": "提示: ", |
| 286 | "ConfigEditNewLabel": "新值: ", |
| 287 | "ConfigEditFooter": " Enter=套用, Esc=取消, Ctrl+U=清除, Ctrl+A=全選, ←/→=移動 ", |
| 288 | "ConfigLocalePartialBadge": "部分翻譯", |
| 289 | "ConfigLocalePartialDetail": "此語言包僅有部分翻譯；未翻譯的文字將使用英文版本。", |
| 290 | "ConfigRowEffective": " (實際 {currency})", |
| 291 | "ConfigDefaultValue": "(預設)", |
| 292 | "ConfigDefaultReasoning": "(設定/預設)", |
| 293 | "ConfigUnavailable": "(無法使用)", |
| 294 | "ConfigLabelProvider": "目前供應商", |
| 295 | "ConfigLabelBaseUrlDeepseek": "供應商 API 地址（DeepSeek 路由）", |
| 296 | "ConfigLabelProviderUrl": "供應商 API 地址", |
| 297 | "ConfigHintProviderUrl": "目前的供應商端點；Xiaomi：token 方案 | 按量付費 | 自訂 URL", |
| 298 | "ConfigLabelModel": "目前供應商模型", |
| 299 | "ConfigLabelFastModel": "快速模型（派生）", |
| 300 | "ConfigLabelDefaultModel": "舊版後備模型（僅 DeepSeek 路由）", |
| 301 | "ConfigLabelReasoningEffort": "思考強度", |
| 302 | "ConfigLabelFleetSpawnDepth": "代理巢狀深度", |
| 303 | "ConfigLabelApprovalMode": "本工作階段權限", |
| 304 | "ConfigLabelPermissionPosture": "新工作階段權限", |
| 305 | "ConfigLabelApprovalPolicy": "新工作階段權限（設定）", |
| 306 | "ConfigLabelManagedApprovalPolicy": "新工作階段權限（受管理）", |
| 307 | "ConfigLabelDefaultMode": "啟動模式", |
| 308 | "ConfigLabelAllowShell": "Shell 存取", |
| 309 | "ConfigLabelManagedAllowShell": "Shell 存取（受管理）", |
| 310 | "ConfigLabelTelemetry": "匿名使用統計", |
| 311 | "ConfigHintTelemetry": "僅向 Codewhale 和 PostHog 傳送版本、工作階段、功能和錯誤的彙總計數；絕不傳送內容或 IP。docs/TELEMETRY.md", |
| 312 | "ConfigValueTelemetryOn": "開啟", |
| 313 | "ConfigValueTelemetryOff": "關閉", |
| 314 | "ConfigLabelStreamTimeout": "流式逾時", |
| 315 | "ConfigLabelTheme": "主題", |
| 316 | "ConfigLabelLocale": "語言", |
| 317 | "ConfigLabelBackground": "背景", |
| 318 | "ConfigLabelWorkSurfacePlacement": "側欄位置", |
| 319 | "ConfigLabelTopHeight": "頂部欄高度", |
| 320 | "ConfigLabelSideWidth": "側欄寬度", |
| 321 | "ConfigLabelCalmMode": "簡潔對話", |
| 322 | "ConfigLabelLowMotion": "減少動態效果", |
| 323 | "ConfigLabelFancyAnimations": "實時介面動態", |
| 324 | "ScreenModeFullscreenNotice": "畫面：全螢幕（替代畫面）。", |
| 325 | "ScreenModeInlineNotice": "畫面：內嵌 — 終端機保留自己的捲動緩衝區。記錄會留在檢視區；目前不會寫入捲動緩衝區。", |
| 326 | "ScreenModeMouseCaptureOn": "滑鼠擷取已開啟。", |
| 327 | "ScreenModeMouseCaptureOff": "滑鼠擷取已關閉；選取由終端機管理。", |
| 328 | "ScreenModeUnchanged": "畫面未變更：{reason}。", |
| 329 | "ImageInputRejectedResent": "{model} 不接受圖片，已將圖片替換為文字重新傳送；請使用 image_ocr 讀取圖片", |
| 330 | "ImageInputOmitted": "{model} 無法檢視圖片，本回合 {count} 張圖片已作為文字傳送；請使用 image_ocr 讀取，或用 /model 切換模型", |
| 331 | "ProviderToolCallMissing": "供應商以 `{reason}` 結束回應，但未提供工具呼叫。請重試本回合以繼續。", |
| 332 | "ConfigLabelShowThinking": "對話中顯示模型推理", |
| 333 | "ConfigLabelThinkingHighlight": "思考背景醒目提示", |
| 334 | "ConfigLabelShowToolDetails": "工具詳情級別", |
| 335 | "ConfigLabelInlineDiffs": "內聯檔案更改", |
| 336 | "ConfigLabelStatusIndicator": "狀態指示器", |
| 337 | "ConfigLabelSynchronizedOutput": "輸出節奏", |
| 338 | "ConfigLabelCostCurrency": "費用幣別", |
| 339 | "ConfigLabelTranscriptSpacing": "對話間距", |
| 340 | "ConfigLabelToolCollapse": "工具卡片", |
| 341 | "ConfigLabelComposerDensity": "輸入框密度", |
| 342 | "ConfigLabelComposerBorder": "輸入框邊框", |
| 343 | "ConfigLabelComposerMultilineMode": "輸入框多行模式", |
| 344 | "ConfigLabelComposerVimMode": "輸入框 Vim 模式", |
| 345 | "ConfigLabelBracketedPaste": "括號粘貼", |
| 346 | "ConfigLabelPasteBurstDetection": "粘貼檢測", |
| 347 | "ConfigLabelMentionMenuLimit": "提及選單上限", |
| 348 | "ConfigLabelMentionMenuBehavior": "提及選單行為", |
| 349 | "ConfigLabelMentionWalkDepth": "檔案提及深度", |
| 350 | "ConfigLabelWorkspaceFollowSymlinks": "跟隨符號鏈接", |
| 351 | "ConfigLabelContextPanel": "上下文面板", |
| 352 | "ConfigLabelSessionsRail": "工作階段欄", |
| 353 | "ConfigLabelSessionAutoResume": "自動還原上次工作階段", |
| 354 | "ConfigLabelAutoCompact": "自動壓縮", |
| 355 | "ConfigLabelAutoCompactThreshold": "壓縮閾值", |
| 356 | "ConfigLabelMaxHistory": "輸入歷史", |
| 357 | "ConfigLabelMcpConfigPath": "MCP 設定路徑", |
| 358 | "ConfigLabelMcpOpen": "MCP 管理員", |
| 359 | "ConfigLabelMcpReconnect": "重新連線 MCP", |
| 360 | "ConfigLabelMcpDiagnose": "診斷 MCP", |
| 361 | "ConfigLabelPluginsOpen": "外掛", |
| 362 | "ConfigLabelGoalCommand": "目標指令", |
| 363 | "ConfigLabelWorkflow": "工作流程", |
| 364 | "ConfigLabelFeaturePrefix": "功能：{name}", |
| 365 | "ConfigColumnSetting": "設定", |
| 366 | "ConfigColumnValue": "值", |
| 367 | "ConfigColumnScope": "範圍", |
| 368 | "ConfigActionOpenProvider": "按 Enter 開啟供應商選擇器", |
| 369 | "ConfigActionOpenModel": "按 Enter 開啟模型選擇器", |
| 370 | "ConfigActionOpenMcp": "Enter 開啟 MCP 管理員", |
| 371 | "ConfigActionMcpReconnect": "Enter 重新連線 MCP", |
| 372 | "ConfigActionMcpDiagnose": "Enter 診斷 MCP", |
| 373 | "ConfigActionOpenPlugins": "Enter 開啟外掛", |
| 374 | "ConfigActionToggle": "按 Enter 切換", |
| 375 | "ConfigActionChoose": "按 Enter 開啟選項", |
| 376 | "ConfigActionEdit": "按 Enter 編輯", |
| 377 | "ConfigActionReadOnly": "唯讀", |
| 378 | "ModelPickerAutoNetworkHint": "每回合 · 可用供應商 · 請求與近期上下文 → DeepSeek / deepseek-v4-flash", |
| 379 | "ModelPickerAutoNetworkActiveProviderHint": "每回合 · 僅目前供應商 · 請求與近期上下文 → {provider} / {model}", |
| 380 | "ModelPickerAutoLocalHint": "每回合 · 本機啟發式 · 不傳送路由請求", |
| 381 | "ModelPickerAutoLastRoute": "上次 {provider} · {model}", |
| 382 | "AutoRouteSelectedToast": "Auto: {provider} / {model}（{source}）· Ctrl+O：路由詳情", |
| 383 | "ModelPickerNotListed": "{provider} 未列出（{date} 檢查）", |
| 384 | "HelpGroupCommonCommands": "常用指令", |
| 385 | "HelpGroupAllCommands": "全部指令", |
| 386 | "HelpTitle": "說明", |
| 387 | "HelpFilterPlaceholder": "輸入以篩選", |
| 388 | "HelpFilterPrefix": "篩選: ", |
| 389 | "HelpNoMatches": " 無相符。", |
| 390 | "HelpSlashCommands": "斜槓指令", |
| 391 | "HelpKeybindings": "快捷鍵", |
| 392 | "HelpUserCommands": "使用者指令", |
| 393 | "HelpSkills": "技能", |
| 394 | "HelpFooterTypeFilter": " 輸入以篩選 ", |
| 395 | "HelpFooterMove": " Up/Down 移動 ", |
| 396 | "HelpFooterJump": " PgUp/PgDn 跳轉 ", |
| 397 | "HelpFooterClose": " Esc 關閉 ", |
| 398 | "CmdAnchorDescription": "固定一條關鍵事實，上下文壓縮後仍會保留", |
| 399 | "CmdAttachDescription": "附加媒體（文字檔案或資料夾請使用 @path）", |
| 400 | "CmdCacheDescription": "顯示最近回合的快取命中/未命中統計", |
| 401 | "CmdPreviewRequestDescription": "在不傳送的情況下，以脫敏清單形式預覽下一個請求", |
| 402 | "CmdToolsDescription": "檢視最近一次已準備的工具請求（唯讀）", |
| 403 | "CmdEffortDescription": "設定模型的推理等級（也可用 /thinking）", |
| 404 | "CmdChangeDescription": "顯示最新的更新日誌", |
| 405 | "CmdChangeHeader": "最新更新日誌", |
| 406 | "CmdChangeTranslationQueued": "以下是英文說明。已請求翻譯；若翻譯失敗，會保留這份英文內容。", |
| 407 | "CmdChangeTranslationUnavailable": "下面顯示英文發布說明。目前工作階段沒有 API Key 或處於離線狀態，無法翻譯。", |
| 408 | "CmdChangePreviousVersion": "上一個版本: {version} —— 輸入 `/change {version}` 檢視", |
| 409 | "CmdBalanceDescription": "檢視目前供應商帳戶餘額", |
| 410 | "CmdImportClaudeDescription": "產生可審閱的 Claude Code 設定與 MCP 伺服器匯入計畫", |
| 411 | "CmdClearDescription": "清除對話歷史", |
| 412 | "CmdCompactDescription": "觸發上下文壓縮以釋放空間", |
| 413 | "CmdPurgeDescription": "讓 Agent 分析對話歷史，精確保留有用資訊並移除冗餘內容", |
| 414 | "CmdConfigDescription": "檢視與修改設定（原始鍵在高級詳情）", |
| 415 | "CmdPermissionsDescription": "列出並安全刪除權限規則", |
| 416 | "PermissionsListHeader": "權限規則\n來源：目前使用者的 permissions.toml\n路徑：{path}\n檔案狀態：{file_state}\n規則數：{count}", |
| 417 | "PermissionsNoRules": "尚未設定權限規則。", |
| 418 | "PermissionsFileMissing": "不存在", |
| 419 | "PermissionsFileEmpty": "空檔案", |
| 420 | "PermissionsFilePresent": "存在", |
| 421 | "PermissionsRuleEntry": "#{index} | {action} | {tool}\n 實際相符：{matcher}\n 作用域：{scope} — {applicability}", |
| 422 | "PermissionsMatchExactCommand": "完整指令精確相符 `{command}`", |
| 423 | "PermissionsMatchCommandPrefix": "指令前綴 `{command}`（感知參數邊界）", |
| 424 | "PermissionsMatchExactPath": "規範化路徑精確相符 `{path}`", |
| 425 | "PermissionsMatchAnyInvocation": "此工具的任意呼叫", |
| 426 | "PermissionsScopeGlobal": "全域", |
| 427 | "PermissionsScopeRepo": "儲存庫 `{workspace}`", |
| 428 | "PermissionsAppliesHere": "在目前工作區生效", |
| 429 | "PermissionsInactiveHere": "在目前工作區不生效", |
| 430 | "PermissionsRemovePreview": "請檢查將要刪除的規則 #{index}：\n{rule}\n\n執行 `{command}` 確認。如果 permissions.toml 發生變化，此指令將失效。", |
| 431 | "PermissionsRemoved": "已刪除權限規則 #{index}：{action} {tool}。", |
| 432 | "PermissionsUsage": "用法：/permissions [list|remove <rule-number> [--confirm <token>]]", |
| 433 | "PermissionsRuleNotFound": "未找到權限規則 #{index}；請重新執行 `/permissions list`。", |
| 434 | "PermissionsOperationFailed": "權限規則操作失敗：{error}", |
| 435 | "CmdConstitutionDescription": "管理長期憲章與預覽", |
| 436 | "CmdContextDescription": "開啟上下文檢查器", |
| 437 | "CmdCostDescription": "顯示本工作階段的費用明細", |
| 438 | "CmdReceiptsDescription": "顯示本工作階段做了什麼：檔案、指令、核准", |
| 439 | "CmdDiffDescription": "顯示工作階段開始以來的檔案變更", |
| 440 | "CmdEditDescription": "修改並重新提交最後一條訊息", |
| 441 | "CmdExitDescription": "退出套用", |
| 442 | "CmdExportDescription": "將對話安全地複製匯出，或寫入到指定檔案", |
| 443 | "CmdCopyDescription": "複製最後完成的助理回覆到剪貼簿", |
| 444 | "CmdCopyNoOutput": "沒有可複製的已完成助理回覆", |
| 445 | "CmdCopySuccess": "已接受將最後完成的助理回覆傳送到剪貼簿的請求；復原副本位於 {path}", |
| 446 | "CmdCopySuccessNoBackup": "最後完成的助理回覆已接受並準備傳送到剪貼簿，但無法寫入復原檔案。請使用 `/export file <path>` 選擇儲存位置", |
| 447 | "CmdCopyQueued": "已將最後完成的助理回覆加入終端用戶端剪貼簿佇列；復原副本位於 {path}", |
| 448 | "CmdCopyQueuedNoBackup": "已將最後完成的助理回覆加入終端用戶端剪貼簿佇列，但無法寫入復原檔案。請使用 `/export file <path>` 選擇儲存位置", |
| 449 | "CmdCopyFailed": "複製到剪貼簿失敗：{error}。回覆已儲存到 {path}", |
| 450 | "CmdCopyFailedNoBackup": "複製到剪貼簿失敗：{error}。無法寫入復原檔案；請使用 `/export file <path>` 選擇儲存位置", |
| 451 | "CmdFeedbackDescription": "草擬並檢閱本機問題報告", |
| 452 | "FeedbackNoSession": "請先開始或繼續工作階段，再草擬問題報告。", |
| 453 | "FeedbackUnavailable": "草稿或請求無法使用或無效。請檢查目前的工作階段、草稿 ID 和文字長度限制；未發布任何內容。", |
| 454 | "FeedbackReviewNotice": "這是供檢閱的本機草稿。發布和重複問題搜尋功能無法使用。分享前請檢查內容；遮蔽敏感資訊並不能保證隱私安全。", |
| 455 | "FeedbackHelp": "請目前的代理草擬 Codewhale 問題報告、檢閱已儲存的草稿，或要求修改。錯誤報告草稿只保留在本機；發布功能無法使用。", |
| 456 | "FeedbackDraftRequested": "正在請目前的代理草擬或修改本機問題報告。只有儲存成功後，草稿才會存在。發布功能無法使用。", |
| 457 | "CmdHfDescription": "檢查 Hugging Face MCP 設定和概念", |
| 458 | "CmdHelpDescription": "指令、技能與快捷鍵", |
| 459 | "CmdProfileDescription": "切換到命名設定設定檔案", |
| 460 | "CmdHomeDescription": "保留目前對話並開啟首頁", |
| 461 | "CmdOverviewDescription": "顯示主頁面板，含統計與快捷操作", |
| 462 | "HomeBackToConversation": "返回對話", |
| 463 | "HomeNavigationBusy": "請先完成或停止目前工作，再開啟首頁。", |
| 464 | "CmdHooksDescription": "在擴充功能中管理生命週期掛鉤", |
| 465 | "CmdAgentDescription": "開啟持久的代理工作階段", |
| 466 | "CmdGoalDescription": "跨多回合持續推進同一個目標", |
| 467 | "CmdInitDescription": "為專案產生 AGENTS.md", |
| 468 | "CmdLspDescription": "切換 LSP 診斷的開啟或關閉", |
| 469 | "CmdShareDescription": "將目前工作階段匯出為可共享的 Web URL", |
| 470 | "CmdJobsDescription": "檢視並管理後台 shell 作業", |
| 471 | "CmdDispatchDescription": "派遣 Codewhale 雲端代理以建立分支並開啟拉取請求", |
| 472 | "CmdLinksDescription": "顯示 Codewhale、社群與供應商連結", |
| 473 | "CmdLoadDescription": "從檔案載入工作階段", |
| 474 | "CmdLogoutDescription": "清除 API 金鑰並返回設定", |
| 475 | "CmdMcpDescription": "開啟或管理 MCP 伺服器；init 新增伺服器，doctor 檢查伺服器", |
| 476 | "McpReloadAlreadyRunning": "MCP 重新載入正在進行中，狀態列會顯示進度。", |
| 477 | "McpRecommendedUnknownId": "未知的建議 MCP ID。執行 {recommendations_command} 查看精選清單。", |
| 478 | "McpRecommendationsHeading": "建議的 MCP 伺服器（不會自動安裝）", |
| 479 | "McpRecommendationsSafety": "查看此清單不會新增或啟用任何內容。明確新增只會寫入設定；請在 {restart_command} 連線伺服器前檢查設定。", |
| 480 | "McpRecommendationGithub": "• github — GitHub 官方遠端 MCP 端點\n 端點：{endpoint}\n 驗證會另外進行：只有伺服器宣告支援 OAuth 時才使用 {login_command}；\n 否則請在指令歷程之外設定最小權限 PAT。授予的範圍可能寫入或刪除\n 儲存庫資料，因此請盡可能從唯讀權限開始。\n 明確新增：{add_command}", |
| 481 | "McpRecommendationChrome": "• chrome-devtools — 透過鎖定版本 npm 套件提供的官方 Chrome DevTools MCP\n 套件：{package}（{launcher}）\n 它可檢查或控制 Chrome，並讀取已驗證頁面。請關閉敏感分頁並在\n 新增前驗證套件；{restart_command} 可能會下載並執行它。\n 明確新增：{add_command}", |
| 482 | "McpRecommendationPlaywright": "• playwright — 透過鎖定版本 npm 套件提供的 Microsoft 官方 Playwright MCP\n 套件：{package}（{launcher}）\n 來源：{source}\n --isolated 會啟動新的瀏覽器設定檔。它可瀏覽或控制頁面並提交表單，\n 因此請先審查操作；{restart_command} 可能會下載並執行該套件。\n 明確新增：{add_command}", |
| 483 | "McpRecommendationContainerUse": "• container-use — Dagger 的實驗性 container-use MCP\n 指令：container-use stdio\n 來源：{source}\n 需要另行安裝 container-use 二進位檔；Codewhale 絕不會下載或安裝此檔案。\n 它可以建立容器並修改已掛載的工作區檔案。請在 {restart_command} 前審查安裝來源和指令。\n 明確新增：{add_command}", |
| 484 | "CmdPluginDescription": "檢查和管理受信任的外掛包；舊版可執行工具保持独立", |
| 485 | "PluginKimiUsage": "用法：\n {list_command}\n {approve_command}\n列出操作為唯讀。核准後會透過已審查的安裝程式複製一個標準的 Kimi 受管外掛；它仍保持停用且不受信任。", |
| 486 | "PluginKimiManagedRootHeading": "{root} 中的 Kimi 受管外掛：", |
| 487 | "PluginKimiNoneFound": "找不到有效的受管外掛。", |
| 488 | "PluginKimiLicenseUnspecified": "未指定", |
| 489 | "PluginKimiApplicable": "適用於此作業系統", |
| 490 | "PluginKimiNotApplicable": "不適用於此作業系統", |
| 491 | "PluginKimiCandidateSummary": "{name} {version} — 授權={license} — {applicability} — {inventory}", |
| 492 | "PluginKimiCandidateDetails": " 路徑：{path}\n 內容雜湊：{content_hash}\n 能力雜湊：{capability_hash}\n 核准：{approve_command}", |
| 493 | "PluginKimiRejectedHeading": "已拒絕的項目（不可匯入）：", |
| 494 | "PluginKimiInspectionFooter": "本次檢查沒有複製、信任、啟用或執行任何內容，也未檢查外部 Kimi 應用程式、常駐程式、二進位檔、瀏覽器擴充功能、憑證或作業系統權限。", |
| 495 | "PluginKimiCandidateMissing": "沒有名為 `{name}` 的有效 Kimi 受管標準外掛。請重新執行 {list_command}。", |
| 496 | "PluginKimiCandidateChanged": "Kimi 受管外掛 `{name}` 自審查後已變更。預期內容雜湊為 {expected}，目前為 {actual}。未複製任何內容；請重新執行 {list_command}。", |
| 497 | "PluginKimiHomeMissing": "找不到用於 Kimi 匯入的使用者家目錄。", |
| 498 | "PluginKimiRootInspectFailed": "無法檢查 Kimi 受管外掛根目錄 {root}：{error}", |
| 499 | "PluginKimiRootMustBeDirectory": "Kimi 受管外掛根目錄 {root} 必須是真實目錄，不能是連結或重新剖析點。", |
| 500 | "PluginKimiRootCanonicalizeFailed": "無法標準化 Kimi 受管外掛根目錄 {root}：{error}", |
| 501 | "PluginKimiRootListFailed": "無法列出 Kimi 受管外掛根目錄 {root}：{error}", |
| 502 | "PluginKimiEntryReadFailed": "無法讀取 Kimi 受管外掛項目：{error}", |
| 503 | "PluginKimiEntryLimit": "Kimi 受管外掛根目錄包含 {count} 個項目；每次掃描最多審查 {max} 個。", |
| 504 | "PluginKimiEntryInspectFailed": "{path}：無法檢查：{error}", |
| 505 | "PluginKimiEntryLinksRefused": "{path}：拒絕連結和重新剖析點", |
| 506 | "PluginKimiEntryOutsideRoot": "{path}：標準路徑 {canonical_path} 不是受管根目錄的直接子項", |
| 507 | "PluginKimiEntryCanonicalizeFailed": "{path}：無法標準化：{error}", |
| 508 | "PluginKimiManifestUnreadable": "{path}：沒有可讀取的 {manifest}：{error}", |
| 509 | "PluginKimiManifestMustBeFile": "{path}：{manifest} 必須是真實的一般檔案", |
| 510 | "PluginKimiManifestInvalid": "{path}：資訊清單無效：{error}", |
| 511 | "PluginKimiDirectoryNameMismatch": "{path}：目錄名稱必須與資訊清單名稱 `{name}` 完全一致", |
| 512 | "PluginKimiHashUnavailable": "無法使用", |
| 513 | "PluginKimiRollbackDestinationMissing": "安裝程式未回報目的地路徑。", |
| 514 | "PluginKimiMismatchRemoved": "複製後的外掛 `{name}` 與核准的內容不符（預期 {expected}，實際 {actual}）。已移除非預期副本；請審查後重試。", |
| 515 | "PluginKimiMismatchRollbackFailed": "錯誤：複製後的外掛 `{name}` 與核准的內容不符（預期 {expected}，實際 {actual}），且自動移除失敗：{error}。它仍處於停用且不受信任狀態；繼續前請檢查 {path}。", |
| 516 | "PluginKimiUserPluginDirectory": "使用者外掛目錄", |
| 517 | "PluginKimiMarketplaceZipUnsupported": "Codewhale 的已審查安裝程式不支援 Kimi ZIP 套件；請從本機目錄安裝，或匯入上游 Kimi 受管外掛。", |
| 518 | "PluginKimiMarketplaceRemoteUnsupported": "供 Codewhale 安裝的 Kimi 遠端來源必須以 .tar.gz 或 .tgz 結尾；可辨識 .zip，但目前不支援。", |
| 519 | "PluginKimiMarketplaceGzipTarball": "gzip 壓縮 tar 套件 URL", |
| 520 | "CmdPluginBundleUsage": "用法：/plugin [list|show <name>|validate [name]|install <spec>|update <name>|uninstall <name>|trust <name> [review-token]|enable <name>|disable <name>|revoke <name>|reload|tools [name]]", |
| 521 | "CmdPluginBundleNoneFound": "未發現 Codewhale 外掛包。", |
| 522 | "CmdPluginBundleListHeader": "外掛包（{count}）：", |
| 523 | "CmdPluginLegacyListHeader": "{dir} 中的舊版可執行外掛工具（{count}）：", |
| 524 | "CmdPluginBundleNotFound": "未找到外掛包“{name}”", |
| 525 | "CmdPluginBundleReloaded": "已為 {workspace} 重新載入 {count} 個外掛包。", |
| 526 | "PluginPromptSuggestTrust": "這看起來像 {name} 相關工作。啟用前請先審查：/plugin trust {name}", |
| 527 | "PluginPromptSuggestEnable": "這看起來像 {name} 相關工作。啟用它：/plugin enable {name}", |
| 528 | "PluginPromptSuggestMarketplace": "這看起來像 {name} 相關工作。從目錄 `{catalog}` 安裝：/plugin marketplace install {catalog} {name}", |
| 529 | "PluginCtaInstallPrompt": "建議的外掛：{name}", |
| 530 | "PluginCtaReview": "審查", |
| 531 | "PluginCtaInstall": "安裝", |
| 532 | "PluginCtaReviewTrust": "審查信任", |
| 533 | "PluginCtaEnable": "啟用", |
| 534 | "PluginCtaDismiss": "不再建議", |
| 535 | "PluginCtaDismissSaveFailed": "已在本次工作階段中隱藏，但無法儲存外掛偏好設定。", |
| 536 | "PluginSuggestionReason": "符合「{trigger}」", |
| 537 | "CmdPluginBundleDetail": "{name}\n========================================\nID：{id}\n版本：{version}\n來源：{origin}（{scope}）\n狀態：{state}\n信任：{trust}\n組件：{inventory}\n請求的權限：{permissions}\nMCP 伺服器：{mcp}\n不支援/未啟用：{unsupported}\n內容雜湊：{content_hash}\n能力雜湊：{capability_hash}\n路徑：{path}", |
| 538 | "CmdPluginBundleDiagnosticsHeader": "外掛診斷（{count}）：", |
| 539 | "CmdPluginBundleMutationSuccess": "外掛包“{name}”：{action}。", |
| 540 | "CmdPluginActionFailed": "外掛操作失敗：{error}", |
| 541 | "CmdPluginNoneFound": "在 {dir} 未發現舊版可執行外掛工具", |
| 542 | "CmdPluginNotFound": "未找到外掛「{name}」", |
| 543 | "CmdPluginListHeader": "舊版可執行外掛工具（{count}）：", |
| 544 | "CmdPluginDetailDescription": "描述：{description}", |
| 545 | "CmdPluginDetailSchema": "架構：\n{schema}", |
| 546 | "CmdPluginDetailApproval": "核准：{approval}", |
| 547 | "CmdPluginDetailPath": "路徑：{path}", |
| 548 | "CmdMemoryDescription": "檢視或管理持久結構化使用者記憶", |
| 549 | "CmdModeDescription": "切換權限或開啟模式選擇器", |
| 550 | "CmdModelDescription": "切換或檢視目前模型", |
| 551 | "CmdModelsDescription": "工具箱：從目前 API 取得實時模型 ID", |
| 552 | "CmdRouterDescription": "設定 Auto 模型路由的逐回合路由器", |
| 553 | "RouterSetupTitle": "模型路由器", |
| 554 | "RouterPresetJevHint": "經由 {route} 的 Jev 決策模型 · 每回合約 $0.00002 · 你的最新請求與近期上下文會傳送到 {route}", |
| 555 | "RouterPresetFastHint": "{model},關閉思考 · 使用你的 {provider} 金鑰", |
| 556 | "RouterPresetOffHint": "不呼叫路由器 · 每個 Auto 回合都使用預設模型", |
| 557 | "RouterPresetOffCostSavingHint": "不呼叫路由器 · [auto] cost_saving 讓 Auto 回合維持在快速檔", |
| 558 | "RouterPresetCustomHint": "顯示 [auto.router] 的 TOML 以便手動編輯", |
| 559 | "RouterPresetUnavailable": "無法使用:{reason}", |
| 560 | "RouterTypesafeSignupPaused": "TypeSafe 已於 2026-09-22 暫停新用戶註冊;新用戶預設使用 OpenRouter 路由。", |
| 561 | "RouterTestSaveHint": "已用範例請求進行一次測試呼叫。Enter 儲存此路由器;Esc 放棄。", |
| 562 | "RouterTestHeader": "路由器測試 ({args})", |
| 563 | "RouterTestNotMade": "未進行測試呼叫:{reason}", |
| 564 | "RouterTestWouldRoute": "會把 \"{request}\" 路由到 {provider} / {model} · {latency} ms", |
| 565 | "RouterTestDecision": "決策:{tier} · {reason}", |
| 566 | "RouterTestChoice": "選擇:{choice} ({probabilities}) · 信心度 {confidence} (最低 {min})", |
| 567 | "RouterTestCostReported": "費用:${cost} (供應商回報)", |
| 568 | "RouterTestCostUnreported": "費用:供應商未回報", |
| 569 | "RouterTestUsage": "用量:輸入 {input} · 輸出 {output}", |
| 570 | "RouterTestFailing": "路由器失敗:{reason}", |
| 571 | "RouterSaved": "路由器已儲存 ({router}) 到 {path}", |
| 572 | "RouterNotSaved": "路由器未儲存:{error}", |
| 573 | "RouterRuntimeNotReloaded": "路由器已儲存，但執行階段執行緒在重新啟動前仍使用先前的路由器:{error}", |
| 574 | "RouterCurrent": "目前:{router}", |
| 575 | "RouterCurrentFailing": "目前:{router} · 失敗:{reason}", |
| 576 | "RouterSummary": "{kind} 路由器 · {provider} / {model}", |
| 577 | "RouterSummaryThinking": "{kind} 路由器 · {provider} / {model} · 思考 {thinking}", |
| 578 | "RouterPresetFastLabel": "快速檔", |
| 579 | "RouterPresetCustomLabel": "自訂", |
| 580 | "RouterNoKey": "沒有 {route} API 金鑰", |
| 581 | "RouterNoFastTier": "目前供應商沒有可執行的快速檔", |
| 582 | "RouterNeedKey": "新增 OpenRouter 金鑰 (OPENROUTER_API_KEY) 或 TypeSafe 金鑰 (TYPESAFE_API_KEY)", |
| 583 | "RouterCustomByHand": "自訂路由器需手動編輯", |
| 584 | "RouterCustomHelpIntro": "編輯 config.toml 中的 [auto.router],例如:", |
| 585 | "RouterCustomHelpOutro": "刪除該表(或執行 /router off),每個 Auto 回合都會使用預設模型。", |
| 586 | "RouterActionTest": "測試", |
| 587 | "RouterActionSave": "儲存", |
| 588 | "RouterActionDiscard": "放棄", |
| 589 | "ModelsListHeader": "{provider} 的模型（預設：{model}）", |
| 590 | "ModelsListHint": "已快取的目錄；執行 `codewhale models --update` 可更新已設定的供應商。", |
| 591 | "ModelsUpdateSummary": "模型目錄：{updated} 個已更新，{loaded} 個從 Codex 載入，{failed} 個失敗，{skipped} 個已略過。", |
| 592 | "ModelsUpdatePartial": "部分目錄無法更新。先前的模型和已設定的模型仍然可用。", |
| 593 | "ModelsCodexHint": "ChatGPT 模型透過 Codex 載入。查詢時間並不代表供應商已重新整理模型目錄。", |
| 594 | "ModelsSourceFallback": "內建或已設定的模型；尚未驗證可用性。", |
| 595 | "CmdModelDbDescription": "參考：瀏覽內置的模型資料庫", |
| 596 | "CmdNetworkDescription": "管理網路允許和拒絕規則", |
| 597 | "CmdUpdateDescription": "檢查並安裝新的 Codewhale 版本", |
| 598 | "CmdNoteDescription": "新增、列出、編輯或刪除工作區筆記", |
| 599 | "CmdThemeDescription": "切換主題或開啟主題選擇器", |
| 600 | "CmdProviderDescription": "切換供應商或模型", |
| 601 | "CmdAuthDescription": "管理供應商驗證流程", |
| 602 | "CmdLoginDescription": "登入 Codewhale 或儲存供應商金鑰", |
| 603 | "CmdQueueDescription": "檢視或編輯已排隊的訊息", |
| 604 | "CmdQueueUsage": "用法: /queue [list|send <n>|edit <n>|drop <n>|clear]", |
| 605 | "CmdQueueDraftHeader": "正在編輯已排隊的訊息:", |
| 606 | "CmdQueueNoMessages": "沒有已排隊的訊息", |
| 607 | "CmdQueueListHeader": "已排隊的訊息 ({count}):", |
| 608 | "CmdQueueTip": "提示: /queue send <n> 立即傳送, /queue drop <n> 刪除", |
| 609 | "CmdQueueAlreadyEditing": "已在編輯一條已排隊的訊息。請先傳送或使用 /queue clear 放棄。", |
| 610 | "CmdQueueNotFound": "未找到已排隊的訊息", |
| 611 | "CmdQueueEditingStatus": "正在編輯已排隊的訊息 {index}", |
| 612 | "CmdQueueEditingMessage": "正在編輯已排隊的訊息 {index}（按 Enter 重新排隊/傳送）", |
| 613 | "CmdQueueDropped": "已刪除已排隊的訊息 {index}", |
| 614 | "CmdQueueAlreadyEmpty": "佇列已空", |
| 615 | "CmdQueueCleared": "佇列已清空", |
| 616 | "CmdQueueMissingIndex": "缺少索引。用法: /queue edit <n> 或 /queue drop <n>", |
| 617 | "CmdQueueIndexPositive": "索引必須為正數", |
| 618 | "CmdQueueIndexMin": "索引必須 >= 1", |
| 619 | "CmdRelayDescription": "為新執行緒建立工作階段接力摘要", |
| 620 | "CmdRemoteControlDescription": "從 Codewhale 網頁帳戶繼續這個工作階段", |
| 621 | "CmdRemoteEnvDescription": "從 GitHub 或 CNB 分支尖端開啟新的託管 Work", |
| 622 | "CmdRemoteEnvOverview": "託管 Work 會從 GitHub 或 CNB 上可用的分支尖端啟動一個新環境。\n\n它不會移動這個本機資料夾，也不會包含尚未推送的提交、已修改或已忽略的檔案、密鑰或工作階段狀態。\n\n使用 {command} 開啟託管 Work 啟動器。", |
| 623 | "CmdRemoteEnvOpening": "正在為 {repo} 的 {branch} 分支開啟託管 Work。\n\n這會從設定為 {origin} 的 Git 主機上可用的分支尖端啟動一個新環境。僅存在於本機的狀態不會包含在內。\n\n如果瀏覽器未開啟，請使用：\n{url}", |
| 624 | "CmdRemoteEnvUnavailable": "Codewhale 無法同時確認這個資料夾具有受支援的 GitHub 或 CNB origin，以及已簽出的分支。請簽出一個分支，並使用 HTTPS 或 SSH URL 設定 {origin}，然後重試 {command}。沒有建立或配置任何資源。", |
| 625 | "CmdRemoteEnvSourceCustodyPolicy": "Codewhale 不會將本機原始碼上傳、移轉或同步到託管 Work。使用 {command} 從 GitHub 或 CNB 上可用的分支尖端開始。尚未推送的提交、已修改或已忽略的檔案、密鑰和工作階段狀態仍保留在本機。", |
| 626 | "CmdRemoteEnvBrowserLabel": "Codewhale 託管 Work", |
| 627 | "CmdRenameDescription": "重新命名目前工作階段", |
| 628 | "CmdTitleDescription": "設定終端機中顯示的分頁與視窗標題", |
| 629 | "CmdRestoreDescription": "將工作區回復到某個回合的快照", |
| 630 | "CmdRetryDescription": "重試上一次請求", |
| 631 | "CmdReviewDescription": "對檔案、diff 或 PR 進行結構化程式碼審查", |
| 632 | "CmdRlmDescription": "工具箱：開啟持久 RLM 上下文", |
| 633 | "CmdSaveDescription": "將工作階段儲存到檔案", |
| 634 | "CmdFullscreenDescription": "在替代螢幕上繪製（TUI 佔用整個終端機）", |
| 635 | "CmdInlineDescription": "以終端機完整高度內嵌繪製，保留終端機自身的回捲緩衝", |
| 636 | "CmdForkDescription": "將目前對話分叉為兄弟工作階段", |
| 637 | "CmdTreeDescription": "以樹狀結構顯示工作階段歷史（葉節點為目前分支）", |
| 638 | "CmdBranchDescription": "將分支指向某個項目，不重寫歷史記錄", |
| 639 | "CmdResumeDescription": "恢復工作階段，也可匯入已匯出的工作階段 JSON 檔案", |
| 640 | "CmdNewDescription": "開始一個新的已儲存工作階段", |
| 641 | "CmdSessionsDescription": "開啟工作階段歷史；archive 與 prune 用於管理舊工作階段", |
| 642 | "CmdSettingsDescription": "開啟類型化設定編輯器", |
| 643 | "CmdSidebarDescription": "放置任務面板（bottom/top/left/right/off）", |
| 644 | "CmdSkillDescription": "激活技能，或安裝/更新/卸載/信任社群技能", |
| 645 | "CmdSkillsDescription": "列出本地技能、按前綴篩選，或瀏覽精選遠端註冊表", |
| 646 | "CmdStashDescription": "暫存或還原輸入草稿", |
| 647 | "CmdStatusDescription": "顯示目前執行狀態", |
| 648 | "CmdStatuslineDescription": "設定底欄要顯示哪些條目", |
| 649 | "CmdStructcopyDescription": "將一個工作階段物件複製為已脫敏的 JSON；不是模型工具", |
| 650 | "CmdStructcopyKindTurn": "回合", |
| 651 | "CmdStructcopyKindTool": "工具呼叫", |
| 652 | "CmdStructcopyKindPlan": "Plan", |
| 653 | "CmdStructcopyKindWorkflow": "Workflow 執行", |
| 654 | "CmdStructcopyUsageError": "結構化複製請求無效。用法：{usage}", |
| 655 | "CmdStructcopyUnavailable": "所選{kind}無法使用；未複製任何內容", |
| 656 | "CmdStructcopyBusy": "{kind}狀態正忙；請重試", |
| 657 | "CmdStructcopyPrepareFailed": "無法準備所選{kind}：{error}", |
| 658 | "CmdStructcopyClipboardQueued": "結構化複本（{kind}，{bytes} 位元組）已透過 tmux/OSC 52 排入終端機用戶端的剪貼簿佇列；是否送達取決於終端機支援，目前尚未確認", |
| 659 | "CmdStructcopyClipboardAccepted": "結構化複本（{kind}，{bytes} 字節）已交給剪貼板；若無法存取原生剪貼板，則已改為加入終端寫入佇列", |
| 660 | "CmdStructcopyClipboardFailed": "無法存取剪貼簿（{error}）。未寫入任何內容；請加上 `stdout` 重新執行以查看文字。", |
| 661 | "CmdStructcopyReceiptTooLarge": "結構化複製回執元資料超過 {bytes} 字節的輸出上限；拒絕輸出", |
| 662 | "CmdFleetDescription": "檢視並設定你的 Fleet 及其代理", |
| 663 | "CmdLaneDescription": "檢視與控制持久化的 Lane（執行中的工作流程）", |
| 664 | "CmdWorkflowDescription": "執行可重複使用、依序進行的工作流程", |
| 665 | "CmdWorkflowsDescription": "顯示此工作空間的工作流程執行（列表、取消）", |
| 666 | "CmdHotbarDescription": "開啟 Hotbar 設定", |
| 667 | "CmdSetupDescription": "設定供應商與偏好", |
| 668 | "CmdSubagentsDescription": "/fleet workers 的捷徑：本工作階段的代理", |
| 669 | "CmdAdvisorDescription": "切換此工作階段的背景顧問", |
| 670 | "CmdSystemDescription": "顯示目前系統提示詞", |
| 671 | "CmdTaskDescription": "管理後台任務", |
| 672 | "CmdTokensDescription": "顯示本工作階段的 token 用量", |
| 673 | "CmdTranslateDescription": "切換輸出翻譯為目前系統語言的開關狀態", |
| 674 | "CmdTranslateOff": "輸出翻譯已關閉（顯示原始模型輸出）", |
| 675 | "CmdTranslateOn": "輸出翻譯已開啟：模型回覆將以繁體中文顯示", |
| 676 | "TranslationInProgress": "正在翻譯助理輸出...", |
| 677 | "TranslationComplete": "翻譯完成", |
| 678 | "TranslationFailed": "翻譯失敗", |
| 679 | "CmdTrustDescription": "變更本工作階段的檔案信任；--save 也會持久儲存對專案技能、指令、掛鉤、MCP 伺服器和上下文的信任", |
| 680 | "CmdWorkspaceDescription": "顯示或切換工作區；worktrees 開啟管理器", |
| 681 | "CmdUndoDescription": "移除最後一組訊息對", |
| 682 | "CmdVerboseDescription": "切換實時思考內容的完整顯示", |
| 683 | "CmdCacheAdvice": "第 3 回合起命中率穩定在 ~70% 以上即表示前綴快取穩定；\n長工作階段中明顯偏低則意味著前綴有抖動，值得排查（#263）。", |
| 684 | "CmdCacheFootnote": "* 當供應商未單獨上報未命中時，由「輸入 − 命中」推算。\n", |
| 685 | "CmdCacheUnpricedNote": "成本 — = 該回合沒有權威價格；它未計入工作階段估算 ({notes})。\n", |
| 686 | "CmdCacheHeader": "快取遙測 —— 最近 {count} / {total} 回合（模型：{model}）\n", |
| 687 | "CmdCacheNoData": "快取歷史：尚未記錄任何回合。\n\n受支援的供應商會在 API 回合中返回 `prompt_cache_hit_tokens` / `prompt_cache_miss_tokens`。請先執行一個回合再試 /cache。", |
| 688 | "CmdCacheSessionRates": "本次工作階段快取命中率：{rates}", |
| 689 | "CmdCacheRateParent": "主工作階段", |
| 690 | "CmdCacheRateAgents": "代理", |
| 691 | "CmdCacheRateCombined": "合計", |
| 692 | "CmdCacheTotals": "Σ 輸入：{sum_in} Σ 命中：{sum_hit} Σ 未命中：{sum_miss} 平均命中率：{avg}\n", |
| 693 | "CmdCostReport": "工作階段費用：\n─────────────────────────────\n預估總額：{cost}\n\n依據經稽核的供應商用量遙測與公開價格計算。", |
| 694 | "CmdCostReportSubtotal": "工作階段費用：\n─────────────────────────────\n已定價小計：{cost}\n\n有一個或多個計費回合未包含；請查看下方涵蓋範圍。", |
| 695 | "CmdCostReportUnknown": "工作階段費用：\n─────────────────────────────\n預估總額：未知\n\n所選幣別下沒有任何回合具有可信價格。", |
| 696 | "CmdCostUnknownValue": "未知", |
| 697 | "CmdCostEstimateOnly": "這是估算值而非帳單：依據供應商回報的 token 用量與公開價格在本機計算，可能與實際帳單不同。", |
| 698 | "CmdCostCoverage": "已涵蓋：{turns} 個計費回合中有 {priced} 個已定價。", |
| 699 | "CmdCostUnpricedTurns": "已排除：{unpriced} 個計費回合沒有權威價格（{reasons}）；其花費未計入上述金額。", |
| 700 | "CmdCostUnpricedClasses": "本工作階段出現未定價的 token 類別：{classes}。使用這些類別的回合會保守地標為未知，而不會低報。", |
| 701 | "CmdCostCoverageUnknownLegacy": "涵蓋範圍：未知。此工作階段儲存時尚未記錄逐回合定價涵蓋，因此無法確定上述金額已計入多少。", |
| 702 | "CmdCostPricingProvenance": "使用的定價來源：{sources}。", |
| 703 | "CmdCostLivePricingDowngraded": "無法驗證此路由的即時供應商價格（{defects}）；改用內建的公開價格。", |
| 704 | "CmdCostLivePricingUnavailable": "無法驗證此路由的即時供應商價格（{defects}），且沒有可用的內建費率；此筆支出未知。", |
| 705 | "CmdCostRoutesHeader": "已稽核路由（已脫敏）：", |
| 706 | "CmdTokensCacheBoth": "命中 {hit} / 未命中 {miss}", |
| 707 | "CmdTokensCacheHitOnly": "命中 {hit} / 未命中未上報", |
| 708 | "CmdTokensCacheMissOnly": "命中未上報 / 未命中 {miss}", |
| 709 | "CmdTokensCacheWriteTotal": "本工作階段的快取寫入（建立）token：{write}。在公佈寫入加價的供應商處按高於輸入價計費；逐回合明細見 /cache。", |
| 710 | "CmdTokensContextUnknownWindow": "~{estimated} / 視窗未知", |
| 711 | "CmdTokensContextWithWindow": "~{used} / {window}（{percent}%）", |
| 712 | "FooterAgentSingular": "1 個代理", |
| 713 | "FooterAgentsPlural": "{count} 個代理", |
| 714 | "HeaderAgentsChip": "代理 {count}", |
| 715 | "FooterPressCtrlCAgain": "再次按 Ctrl+C 退出", |
| 716 | "FooterWorking": "工作中", |
| 717 | "FooterBalancePrefix": "餘額", |
| 718 | "HelpSectionActions": "操作", |
| 719 | "HelpSectionClipboard": "剪貼板", |
| 720 | "HelpSectionPointer": "指標", |
| 721 | "HelpSectionEditing": "輸入編輯", |
| 722 | "HelpSectionHelp": "說明", |
| 723 | "HelpSectionModes": "模式", |
| 724 | "HelpSectionNavigation": "導覽", |
| 725 | "HelpSectionSessions": "工作階段", |
| 726 | "CmdTokensNotReported": "未上報", |
| 727 | "CmdTokensReport": "token 用量：\n─────────────────────────────\n使用中上下文： {active}\n上次 API 輸入： {input}（回合遙測；工具往返可能重複計入相同前綴）\n上次 API 輸出： {output}\n快取命中/未命中： {cache}（僅用於遙測/費用）\n累計 token： {total}（工作階段用量遙測）\n已定價金額： {cost}\nAPI 訊息數： {api_messages}\n聊天訊息數： {chat_messages}\n模型： {model}", |
| 728 | "KbScrollTranscript": "捲動對話記錄、瀏覽輸入歷史或選擇附件", |
| 729 | "KbNavigateHistory": "瀏覽輸入歷史", |
| 730 | "KbBrowseHistory": "瀏覽對話歷史", |
| 731 | "KbScrollTranscriptAlt": "捲動對話記錄", |
| 732 | "KbScrollPage": "按頁捲動對話記錄", |
| 733 | "KbJumpTopBottom": "跳轉到對話頂部/底部", |
| 734 | "KbJumpTopBottomEmpty": "跳轉到頂部/底部（輸入框為空時）", |
| 735 | "KbJumpToolBlocks": "在工具輸出塊之間跳轉", |
| 736 | "KbMoveCursor": "在輸入框中移動光標", |
| 737 | "KbJumpLineStartEnd": "跳轉到行首/行尾", |
| 738 | "KbDeleteChar": "刪除光標前/後的字元，或移除已選附件", |
| 739 | "KbDeleteWord": "刪除前一個單詞", |
| 740 | "KbYank": "取回刪除緩衝區的文字；輸入框為空時，複製焦點儲存格", |
| 741 | "KbToggleFileTree": "切換檔案樹側邊欄", |
| 742 | "KbSelectText": "選擇文字（加 Ctrl/Alt 按單詞選擇）", |
| 743 | "KbSelectAllDraft": "全選目前草稿", |
| 744 | "KbClearDraft": "清空目前草稿", |
| 745 | "KbRestoreClearedDraft": "還原已清空的草稿", |
| 746 | "KbStashDraft": "先傳送排隊的跟進內容；否則暫存目前草稿（用 `/stash pop` 還原）", |
| 747 | "KbSearchHistory": "搜尋提示歷史並還原本地草稿", |
| 748 | "KbInsertNewline": "在輸入框中插入換行", |
| 749 | "KbSendDraft": "閒置時傳送，忙碌時排隊；輸入框為空時立即傳送下一條排隊訊息", |
| 750 | "KbSteerCurrentTurn": "調整目前回合（閒置時正常傳送）", |
| 751 | "KbCloseMenu": "關閉選單、取消請求、丟棄草稿或清空輸入", |
| 752 | "KbCancelOrExit": "取消請求，或閒置時退出", |
| 753 | "KbShellControls": "將正在等待的 shell 移到 /jobs", |
| 754 | "KbExitEmpty": "輸入框為空時退出", |
| 755 | "KbCommandPalette": "開啟指令面板", |
| 756 | "KbSettings": "開啟類型化設定編輯器", |
| 757 | "KbCancelBackgroundShellJobs": "取消所有正在執行的背景 shell 作業（任務面板中的 Activity 區）", |
| 758 | "KbFuzzyFilePicker": "開啟模糊檔案選擇器（按 Enter 插入 @path）", |
| 759 | "KbCompactInspector": "開啟上下文檢查器", |
| 760 | "KbCompactContext": "壓縮對話上下文", |
| 761 | "KbLastMessagePager": "開啟最後一條訊息的分頁器（輸入框為空時）", |
| 762 | "KbSelectedDetails": "顯示所選工具或訊息的原始詳情；Ctrl+Alt+O 開啟整回合概覽", |
| 763 | "KbToolDetailsPager": "顯示所選項的原始詳情（Alt+V）", |
| 764 | "KbExternalEditor": "在外部編輯器中開啟撰寫中的草稿", |
| 765 | "KbLiveTranscript": "開啟實時對話涵蓋層（Ctrl+Shift+T；尾部自動捲動）", |
| 766 | "KbBacktrackMessage": "回退到之前的使用者訊息（左右鍵步進，Enter 回退）", |
| 767 | "KbCompleteCycleModes": "補全 /command，或在輸入框為空時切換模式（Plan → Work → Operate）", |
| 768 | "KbCycleThinking": "輪換目前供應商的思考強度 (Ctrl+T)", |
| 769 | "KbCyclePermissions": "切換存取層級：詢問 → 自動審核 → 完整存取（Shift+Tab）", |
| 770 | "KbJumpPlanAgentYolo": "觸發 Hotbar 槽位", |
| 771 | "KbAltJumpPlanAgentYolo": "跳轉到 Plan / Work，或請求 Full Access（舊版別名）", |
| 772 | "KbFocusSidebar": "聚焦 Tasks / Agents / Context / Pinned 任務面板", |
| 773 | "KbSessionPicker": "開啟工作階段選擇器", |
| 774 | "KbUpdateInstall": "檢查並安裝最新的 Codewhale 更新（`/update install`）", |
| 775 | "UpdateChangedHint": "Codewhale 已更新：{previous} → {current}。執行 /change 查看更新內容。", |
| 776 | "KbTerminalPaste": "透過終端機貼上", |
| 777 | "KbPasteAttach": "貼上剪貼簿內容，或附加剪貼簿中的圖片", |
| 778 | "KbCopySelection": "複製 Codewhale 目前選中內容", |
| 779 | "ClipboardSshPasteHint": "SSH 粘貼由本地終端處理：macOS 按 Cmd+V，Linux/Windows 按 Ctrl+Shift+V。", |
| 780 | "ClipboardCopied": "已複製到剪貼簿", |
| 781 | "ClipboardSentToTerminal": "已傳送到終端機剪貼簿（終端機不會確認）", |
| 782 | "ClipboardCutKeptText": "已傳送到終端機剪貼簿；由於終端機不會確認複製，文字已保留", |
| 783 | "ClipboardNothingToPaste": "沒有可貼上的內容：剪貼簿為空或無法讀取", |
| 784 | "KbContextMenu": "對指標下的內容操作：複製、貼上、開啟詳情或在編輯器中開啟 file:line、聚焦或停止代理", |
| 785 | "KbPointerScroll": "捲動記錄；在輸入框上方逐行移動游標", |
| 786 | "KbPointerClick": "啟動指標下的列、標籤或工具區塊", |
| 787 | "KbPointerDrag": "選取記錄文字，或拖曳捲軸", |
| 788 | "KbAttachPath": "將檔案或資料夾加入上下文", |
| 789 | "KbHelpOverlay": "開啟此說明涵蓋層（輸入框為空時）", |
| 790 | "KbCycleWorkDock": "切換任務面板（待辦、代理、作業、背景）", |
| 791 | "KbCycleWorkDockBack": "反向切換任務面板", |
| 792 | "KbToggleHelp": "切換說明涵蓋層", |
| 793 | "KbToggleHelpSlash": "切換說明涵蓋層", |
| 794 | "HelpUsageLabel": "用法：", |
| 795 | "HelpAliasesLabel": "別名：", |
| 796 | "SettingsTitle": "設定：", |
| 797 | "SettingsConfigFile": "設定檔案：", |
| 798 | "SettingsTuiPrefsFolded": "已從 tui.toml 遷移 {key} '{value}' — 現在由 settings.toml 管理。", |
| 799 | "SettingsTuiPrefsKept": "tui.toml 將 {key} 設為 '{prefs}'，但 settings.toml 已設為 '{settings}' — 以 settings.toml 為準。", |
| 800 | "SettingsTuiPrefsQuarantined": "沒有對應設定的 tui.toml 鍵已保留在 {path}: {keys}", |
| 801 | "ClearConversation": "對話已清空", |
| 802 | "ClearConversationBusy": "未清空任何內容（工作狀態或執行階段任務正忙；請等待後重試 /clear）", |
| 803 | "ModelChanged": "模型已切換為 {new}（原為 {old}）。", |
| 804 | "LinksProjectTitle": "Codewhale 與社群：", |
| 805 | "LinksDocumentation": "文件：", |
| 806 | "LinksCommunity": "社群與貢獻：", |
| 807 | "LinksGitHub": "GitHub：", |
| 808 | "LinksManagedApp": "託管應用程式預覽：", |
| 809 | "LinksManagedAppNote": "託管應用程式使用獨立登入，不會連接目前的本機工作階段。", |
| 810 | "LinksTitle": "供應商連結：", |
| 811 | "LinksDashboard": "控制台：", |
| 812 | "LinksDocs": "文件：", |
| 813 | "LinksKimiCodeRouteNote": "Kimi Code 會員套餐路由：`{route}`（套餐控制台：`{console}`；使用模型 k3）。Codewhale 絕不會匯入 Kimi CLI 憑證。", |
| 814 | "LinksTip": "提示：使用所顯示供應商的環境變數，或透過 `codewhale auth set --provider <id>` 儲存金鑰。", |
| 815 | "SubagentsFetching": "正在尋找本工作階段的代理...", |
| 816 | "SubagentsNoCurrentSessionFleetWorkers": "本工作階段沒有代理。", |
| 817 | "SubagentsCurrentSessionFleetWorkersTitle": "本工作階段的代理", |
| 818 | "SubagentsCurrentSessionFleetWorkerRoles": "所示角色為本工作階段中代理的角色。", |
| 819 | "SubagentsCurrentSessionFleetWorkersStatus": "本工作階段的代理：共 {count} 個", |
| 820 | "SubagentsEmptyGuidance": "使用 /fleet 設定角色與啟動設定。", |
| 821 | "SubagentsStatusRunning": "執行中", |
| 822 | "SubagentsStatusCompleted": "已完成", |
| 823 | "SubagentsStatusInterrupted": "已中斷", |
| 824 | "SubagentsStatusFailed": "失敗", |
| 825 | "SubagentsStatusCancelled": "已取消", |
| 826 | "SubagentsRowStatusInterrupted": "已中斷", |
| 827 | "SubagentsRowStatusCancelled": "已取消", |
| 828 | "SubagentsRowStatusBudgetExhausted": "預算已用盡", |
| 829 | "SubagentsSummaryItem": "{label}：{count}", |
| 830 | "SubagentsGroupHeading": "{label}（{count}）", |
| 831 | "SubagentsHeaderRoster": "Fleet", |
| 832 | "SubagentsHeaderColumns": "即時代理狀態 · 角色 · 目標 · 模型 · 已用時間", |
| 833 | "SubagentsActionRefresh": "重新整理", |
| 834 | "SubagentsActionRosterSetup": "fleet/setup", |
| 835 | "SubagentsLabelReason": " 原因： ", |
| 836 | "SubagentsLabelRole": " 角色： ", |
| 837 | "SubagentsLabelPosture": " 存取層級： ", |
| 838 | "SubagentsLabelGit": " Git： ", |
| 839 | "SubagentsLabelObjective": " 目標： ", |
| 840 | "SubagentsLabelResult": " 結果： ", |
| 841 | "SubagentsPostureDetails": "網路={network} · Shell={shell} · 寫入={write}", |
| 842 | "SubagentsValueOn": "開", |
| 843 | "SubagentsValueOff": "關", |
| 844 | "SubagentsShellNone": "無", |
| 845 | "SubagentsShellReadOnly": "唯讀", |
| 846 | "SubagentsShellFull": "完整", |
| 847 | "SubagentsBranch": "分支 {branch}", |
| 848 | "SubagentsBranchWithWorkspace": "分支 {branch} @ {workspace}", |
| 849 | "SubagentsRoleWorker": "通用", |
| 850 | "SubagentsRoleScout": "偵察員", |
| 851 | "SubagentsRolePlanner": "規劃員", |
| 852 | "SubagentsRoleBuilder": "建置者", |
| 853 | "SubagentsRoleVerifier": "驗證者", |
| 854 | "SubagentsRoleReviewer": "審閱者", |
| 855 | "SubagentsRoleConsultant": "顧問", |
| 856 | "SubagentsRoleCustom": "自訂", |
| 857 | "HelpUnknownCommand": "未知指令：{topic} — 請試試 /help", |
| 858 | "HomeDashboardTitle": "codewhale", |
| 859 | "HomeModel": "模型：", |
| 860 | "HomeMode": "模式：", |
| 861 | "HomeWorkspace": "工作區：", |
| 862 | "HomeHistory": "歷史：", |
| 863 | "HomeTokens": "token：", |
| 864 | "HomeQueued": "佇列：", |
| 865 | "HomeSubagents": "本工作階段的代理：", |
| 866 | "HomeSkill": "技能：", |
| 867 | "HomeQuickActions": "快捷操作", |
| 868 | "HomeQuickLinks": "/links - Codewhale、社群與供應商連結", |
| 869 | "HomeQuickSkills": "/skills - 列出可用技能", |
| 870 | "HomeQuickConfig": "/config - 檢視與修改設定", |
| 871 | "HomeQuickSettings": "/settings - 顯示已儲存的設定", |
| 872 | "HomeQuickModel": "/model - 切換或檢視模型", |
| 873 | "HomeQuickSubagents": "/fleet workers - 本工作階段的代理", |
| 874 | "HomeQuickTaskList": "/task list - 顯示後台任務佇列", |
| 875 | "HomeQuickHelp": "/help - 顯示說明", |
| 876 | "HomeQuickWorkspace": "/workspace - 切換資料夾或 worktree", |
| 877 | "HomeQuickRestore": "/restore - 把檔案回退到回合快照", |
| 878 | "HomeQuickTokens": "/tokens - 查看本工作階段用量與上下文", |
| 879 | "HomeModeTips": "模式提示", |
| 880 | "HomeAgentModeTip": "Work — 使用工具完成你要求的變更", |
| 881 | "HomeAgentModeReviewTip": " 用 /mode plan 先調研並提出計畫", |
| 882 | "HomeAgentModeYoloTip": " Shift+Tab 循環權限: Ask → Auto-Review → Full Access", |
| 883 | "HomeYoloModeTip": "Work + 完整存取 — 工具無需先詢問即可執行", |
| 884 | "HomeYoloModeCaution": " 破壞性操作可能立即執行；不確定時用 Ask", |
| 885 | "HomePlanModeTip": "Plan — 實現前先調研與設計", |
| 886 | "HomePlanModeChecklistTip": " 提交計畫與待辦進度，然後切換到 Work 或 Operate", |
| 887 | "HomeGoalModeTip": "Goal 跟蹤 - 設定 /goal <目標> 以跟蹤持久目標", |
| 888 | "OnboardLanguageTitle": "選擇語言", |
| 889 | "OnboardLanguageBlurb": "選擇介面語言。可隨時使用 `/settings set locale <tag>` 修改。", |
| 890 | "OnboardProviderTitle": "選擇模型供應商", |
| 891 | "OnboardProviderBlurb": "選擇模型執行的位置。託管供應商需要金鑰；本地執行階段無需金鑰即可繼續。", |
| 892 | "KimiCodePlanApiKeyHint": "對於 Kimi Code 會員計畫，請在 {console} 建立與計畫關聯的金鑰。", |
| 893 | "KimiCodePlanRouteHint": "此路由使用 {route} 和模型 k3；它不是 Moonshot 的公共 API 路由。", |
| 894 | "KimiCodePlanNoImportHint": "Codewhale 不會匯入 Kimi CLI 憑證；請貼上你自己建立的方案金鑰。", |
| 895 | "StepfunBillingRouteTitle": "StepFun 計費路由", |
| 896 | "StepfunBillingRouteIntro": "StepFun 的按量付費與 Step Plan 訂閱使用不同的端點。請選擇與你的金鑰相符的一項。", |
| 897 | "StepfunBillingRoutePaygOption": "按量付費（按 token 計價）", |
| 898 | "StepfunBillingRoutePlanOption": "Step Plan 訂閱（套餐額度）", |
| 899 | "StepfunPlanApiKeyHint": "使用 StepFun Step Plan 訂閱時，請使用為 Step Plan 簽發的金鑰，而不是按量付費金鑰。", |
| 900 | "StepfunPlanRouteHint": "此路由使用 {route}，並從你的 Step Plan 額度中扣除。", |
| 901 | "OnboardApiKeyRejectedEnv": "來自 {env} 的 {provider} API 金鑰被拒絕。請粘貼有效金鑰並儲存到 {path}，或更新該環境變數。", |
| 902 | "OnboardTrustTitle": "了解此工作區", |
| 903 | "OnboardTrustQuestion": "是否允許 Codewhale 使用此工作區中的指令和檔案開展工作？", |
| 904 | "OnboardTrustLocationPrefix": "工作區 ", |
| 905 | "OnboardTrustRiskHint": "不受信任的檔案可能會透過提示詞注入來誤導代理。", |
| 906 | "OnboardTrustEffectHint": "信任狀態會記錄到此 Codewhale 安裝中，並啟用工作區工具與掛鉤。", |
| 907 | "OnboardTrustEnterHint": "按 1 或 Y 信任，按 3 或 U 在不信任的情況下繼續，按 2、N 或 Esc 退出 Codewhale。", |
| 908 | "OnboardTrustUntrustedNotice": "在未信任工作區的情況下繼續 — 工具與掛鉤保持受限。", |
| 909 | "RedactionGateActionConfirm": "確認並關閉", |
| 910 | "RedactionGateActionKeep": "保持脫敏開啟", |
| 911 | "RedactionGateActionQuit": "結束 Codewhale", |
| 912 | "RedactionGateConfirmTitle": "最終確認", |
| 913 | "RedactionGateConfirmQuestion": "您真的確認嗎？關閉後，工具輸出中的金鑰將原樣傳送給模型，直到您重新開啟並再次確認。", |
| 914 | "RedactionGateActionBack": "返回", |
| 915 | "RedactionGateEffect": "在此一次性確認後生效，後續啟動保持有效，直到您再次將 [redaction] model_bound 改回 \"enabled\"。", |
| 916 | "RedactionGateEnterHint": "Enter 不會確認。請使用下方顯示的按鍵選擇操作。", |
| 917 | "RedactionGateQuestion": "您要求關閉模型邊界的金鑰脫敏。此後，工具輸出中出現的 API 金鑰、權杖或機密將按檔案原樣傳送給模型。", |
| 918 | "RedactionGateDangerNotice": "注意，此功能請謹慎關閉。一般情況下，我們建議您開啟金鑰脫敏。如果將金鑰明文傳送給模型，有外洩的風險，後果請自行承擔。", |
| 919 | "RedactionGateRisk": "僅當模型需要讀取並編輯包含真實憑證的檔案時，才確認關閉。", |
| 920 | "RedactionGateRollbackHint": "選擇「保持開啟」後，本次啟動仍開啟脫敏；由於設定仍為 \"disabled\"，下次啟動會再次詢問。", |
| 921 | "RedactionGateSaveFailed": "無法儲存確認。遮罩仍然開啟。請重試或選擇保持遮罩。", |
| 922 | "RedactionGateTitle": "模型邊界金鑰脫敏", |
| 923 | "OnboardOfflineOption": "Ctrl+O — 離線瀏覽：先隨便看看，之後再連線供應商。", |
| 924 | "OnboardOfflineNotice": "正在離線瀏覽。尚未連線 — 想連線時請執行 /provider。", |
| 925 | "OnboardWelcomeTitle": "Codewhale 在這個資料夾裡與你協作。", |
| 926 | "OnboardWelcomeLead": "我們來做好準備。", |
| 927 | "OnboardWelcomeBegin": "開始", |
| 928 | "OnboardActionBack": "返回", |
| 929 | "OnboardActionExit": "結束", |
| 930 | "OnboardStepsTitle": "入門", |
| 931 | "OnboardLanguagePick": "選擇語言", |
| 932 | "OnboardLanguageKeep": "保持目前語言", |
| 933 | "OnboardProviderChoose": "選擇供應商", |
| 934 | "OnboardProviderOffline": "離線體驗", |
| 935 | "OnboardTrustActionTrust": "信任並繼續", |
| 936 | "OnboardTrustActionSkip": "不信任並繼續", |
| 937 | "OnboardTrustActionQuit": "結束 Codewhale", |
| 938 | "OnboardReadyTitle": "你已就緒。", |
| 939 | "OnboardReadyLead": "告訴 Codewhale 你想完成什麼。", |
| 940 | "OnboardReadyStart": "開始", |
| 941 | "OnboardReadyCustomize": "更改外觀", |
| 942 | "OnboardSeedCodeProject": "說明這個專案在做什麼，並列出主要進入點。", |
| 943 | "OnboardSeedFolder": "看看這個資料夾，建議一個合適的第一個任務。", |
| 944 | "SetupWizardTitle": "設定", |
| 945 | "SetupWizardWhy": "此介面會將設定進度記錄到 setup_state.json；只有明確的步驟操作才會套用設定變更。", |
| 946 | "SetupWizardProgress": "步驟", |
| 947 | "SetupActionBack": "返回", |
| 948 | "SetupActionContinue": "繼續", |
| 949 | "SetupActionSkip": "略過", |
| 950 | "SetupActionRetry": "重試", |
| 951 | "SetupActionScrollBody": "捲動正文", |
| 952 | "SetupActionGuided": "預覽/確認", |
| 953 | "SetupActionTuneGuided": "調整", |
| 954 | "SetupActionModelDraft": "模型草稿", |
| 955 | "SetupActionFreeform": "自己的話", |
| 956 | "SetupActionKeepExisting": "保留現有", |
| 957 | "SetupActionUseRecommended": "使用建議設定", |
| 958 | "SetupActionCustomize": "自訂", |
| 959 | "SetupActionProvider": "供應商設定", |
| 960 | "SetupActionModel": "模型路由", |
| 961 | "SetupActionFleet": "Fleet 設定", |
| 962 | "SetupActionHotbar": "Hotbar 設定", |
| 963 | "SetupActionRemote": "遠端入口", |
| 964 | "SetupActionMode": "模式選擇", |
| 965 | "SetupActionConfig": "設定檢視", |
| 966 | "SetupActionRuntimePreset": "預設", |
| 967 | "SetupActionApplyRuntimePreset": "預覽/套用", |
| 968 | "SetupActionUseBundled": "使用內建", |
| 969 | "SetupActionDefer": "延後", |
| 970 | "SetupActionCancel": "取消", |
| 971 | "SetupStatusNotStarted": "尚未開始", |
| 972 | "SetupStatusRecommended": "建議", |
| 973 | "SetupStatusOptional": "可選", |
| 974 | "SetupStatusDeferred": "已延後", |
| 975 | "SetupStatusInProgress": "進行中", |
| 976 | "SetupStatusNeedsAction": "需要操作", |
| 977 | "SetupStatusVerified": "已驗證", |
| 978 | "SetupStatusSkipped": "已略過", |
| 979 | "SetupStatusFailed": "失敗", |
| 980 | "SetupStepLanguageTitle": "語言", |
| 981 | "SetupStepLanguageWhy": "先選擇設定語言，後續設定畫面與憲章說明才易於理解。", |
| 982 | "SetupStepProviderModelTitle": "供應商與模型", |
| 983 | "SetupStepProviderModelWhy": "Codewhale 使用的供應商與模型；有效憑證會直接沿用。", |
| 984 | "SetupStepTrustSandboxTitle": "權限", |
| 985 | "SetupStepTrustSandboxWhy": "信任、沙箱、核准、shell 與網路政策。", |
| 986 | "SetupStepOperateFleetTitle": "Operate 與 Fleet", |
| 987 | "SetupStepOperateFleetWhy": "內建團隊已可直接使用；Fleet 設定僅用於自訂。", |
| 988 | "SetupStepToolsMcpTitle": "工具與 MCP", |
| 989 | "SetupStepToolsMcpWhy": "檢查可選工具與 MCP 就緒狀態，不阻塞憲章檢查點。", |
| 990 | "SetupStepHotbarTitle": "Hotbar", |
| 991 | "SetupStepHotbarWhy": "核心設定路徑安全後，再設定常用路由與指令捷徑。", |
| 992 | "SetupStepRemoteRuntimeTitle": "遠端執行階段", |
| 993 | "SetupStepRemoteRuntimeWhy": "讓遠端設定保持可見，但對本地優先使用者維持可選。", |
| 994 | "SetupStepPersistenceTitle": "持久化", |
| 995 | "SetupStepPersistenceWhy": "僅顯示路徑，不讀取內容。", |
| 996 | "SetupStepConstitutionTitle": "協作約定", |
| 997 | "SetupStepConstitutionWhy": "此工作約定只引導行為，不會更改執行權限。", |
| 998 | "SetupStepVerificationTitle": "檢視", |
| 999 | "SetupStepVerificationWhy": "總結設定狀態，並顯示哪些步驟已驗證、已略過或仍需操作。", |
| 1000 | "SetupCheckpointLayerOrder": "層級順序：內建基礎憲章 -> 使用者全域憲章 -> 儲存庫憲章 -> AGENTS/專案指示 -> 記憶/交接 -> 目前請求。", |
| 1001 | "SetupCheckpointDoneBundled": "憲章檢查點完成：使用內建/預設憲章。", |
| 1002 | "SetupCheckpointDoneGuided": "憲章已確認並儲存。可隨時用 /constitution 修訂。", |
| 1003 | "SetupCheckpointDoneKept": "已保留現有憲章，內容維持不變。可隨時用 /constitution 修訂。", |
| 1004 | "SetupCheckpointDeferred": "憲章檢查點已延後：返回 /setup 前會套用內建/預設憲章。", |
| 1005 | "SetupStepSkipped": "設定步驟已略過並儲存。", |
| 1006 | "SetupStepRetryRecorded": "設定步驟已標記為重試。", |
| 1007 | "SetupLanguageReviewed": "已記錄設定語言。", |
| 1008 | "SetupConstitutionChoiceLabel": "選擇：", |
| 1009 | "SetupConstitutionSourceLabel": "來源：", |
| 1010 | "SetupConstitutionValidityLabel": "有效性：", |
| 1011 | "SetupConstitutionPreviewLabel": "預覽雜湊：", |
| 1012 | "SetupConstitutionExistingLabel": "現有檔案：", |
| 1013 | "SetupConstitutionExpertOverrideLabel": "專家覆寫：", |
| 1014 | "SetupConstitutionGuidedHint": "1-6 調整草稿，G 預覽，再按 G 確認。這只是指引：不會變更執行核准、沙箱、shell、網路、信任或 MCP 權限。", |
| 1015 | "SetupConstitutionGuidedAnswersHint": "引導回答只儲存使用者全域偏好。內建核心持續生效；執行權限仍由執行階段政策及之後明確啟用的選項決定。", |
| 1016 | "SetupConstitutionExistingDefaultDetail": "按 Enter 原樣保留。按 C 開啟全部工作約定選項。", |
| 1017 | "SetupConstitutionRepairDefaultDetail": "按 Enter 使用安全的內建約定且不修改該檔案。按 C 開啟修復選項。", |
| 1018 | "SetupConstitutionPurposeLabel": "目的：", |
| 1019 | "SetupConstitutionAutonomyLabel": "主動性：", |
| 1020 | "SetupConstitutionEvidenceLabel": "證據：", |
| 1021 | "SetupConstitutionCommunicationLabel": "溝通：", |
| 1022 | "SetupConstitutionPrivacyLabel": "隱私：", |
| 1023 | "SetupConstitutionPrinciplesLabel": "原則：", |
| 1024 | "SetupCardRouteLabel": "路由：", |
| 1025 | "SetupCardModelLabel": "模型：", |
| 1026 | "SetupCardAuthLabel": "認證：", |
| 1027 | "SetupCardHealthLabel": "健康：", |
| 1028 | "SetupCardIntentLabel": "工作意圖：", |
| 1029 | "SetupCardApprovalLabel": "核准：", |
| 1030 | "SetupCardShellLabel": "Shell：", |
| 1031 | "SetupCardTrustLabel": "信任：", |
| 1032 | "SetupCardSandboxLabel": "沙箱：", |
| 1033 | "SetupCardNetworkLabel": "網路：", |
| 1034 | "SetupOperateRuntimeLabel": "代理執行階段：", |
| 1035 | "SetupOperateRosterLabel": "Fleet：", |
| 1036 | "SetupOperateConcurrencyLabel": "並行：", |
| 1037 | "SetupOperateReadinessLabel": "Operate 就緒：", |
| 1038 | "SetupOperateReviewHint": "按 Enter 記錄此設定快照。", |
| 1039 | "SetupOperateReviewed": "已記錄 Operate/Fleet 就緒狀態。", |
| 1040 | "SetupOperateNeedsActionSaved": "Operate/Fleet 仍需操作；已記錄到設定報告。", |
| 1041 | "SetupHotbarBindingsLabel": "Hotbar 綁定：", |
| 1042 | "SetupHotbarActionsLabel": "可綁定操作：", |
| 1043 | "SetupHotbarReviewHint": "按 H 自訂 Hotbar 槽位；按 Enter 記錄目前可選 Hotbar 狀態，不更改設定。", |
| 1044 | "SetupHotbarReviewed": "已記錄 Hotbar 設定狀態。", |
| 1045 | "SetupToolsMcpServersLabel": "MCP 伺服器：", |
| 1046 | "SetupToolsMcpSkillsLabel": "技能：", |
| 1047 | "SetupToolsMcpToolsLabel": "工具目錄：", |
| 1048 | "SetupToolsMcpPluginsLabel": "外掛：", |
| 1049 | "SetupToolsMcpReviewHint": "按 Enter 記錄目前工具/MCP 事實。按 R 查看安全引導（不會自動執行）。", |
| 1050 | "SetupToolsMcpReviewed": "工具/MCP 就緒狀態已記錄。", |
| 1051 | "SetupRemoteCloudsLabel": "雲端目標：", |
| 1052 | "SetupRemoteBridgesLabel": "聊天橋接：", |
| 1053 | "SetupRemoteProvidersLabel": "供應商：", |
| 1054 | "SetupRemoteModeLabel": "遠端模式：", |
| 1055 | "SetupRemoteModeLocalOnly": "僅本機：", |
| 1056 | "SetupRemoteModeRuntimeApi": "執行階段 API：", |
| 1057 | "SetupRemoteModeMobileLan": "同一網路的手機：", |
| 1058 | "SetupRemoteModeChatBridge": "聊天套用：", |
| 1059 | "SetupRemoteStatusDisabled": "無法使用", |
| 1060 | "SetupRemoteStatusReady": "可用", |
| 1061 | "SetupRemoteStatusNeedsAction": "還差一步", |
| 1062 | "SetupRemoteReviewHint": "按 Enter 記錄此設定快照。按 R 預覽。", |
| 1063 | "SetupRemotePreviewTitle": "遠端執行階段入口", |
| 1064 | "SetupRemoteReviewed": "已記錄遠端執行階段入口。", |
| 1065 | "SetupPersistenceHomeLabel": "Home：", |
| 1066 | "SetupPersistenceConfigLabel": "設定：", |
| 1067 | "SetupPersistenceStateLabel": "設定狀態：", |
| 1068 | "SetupPersistenceConstitutionLabel": "憲章：", |
| 1069 | "SetupPersistenceMemoryLabel": "記憶：", |
| 1070 | "SetupPersistenceNotesLabel": "筆記：", |
| 1071 | "SetupPersistenceReviewHint": "按 Enter 記錄此路徑快照。不會建立目錄、讀取檔案內容或重寫設定。", |
| 1072 | "SetupPersistenceReviewed": "已記錄持久化路徑。", |
| 1073 | "SetupProviderModelReadyHint": "按 Enter 記錄此供應商/模型路由；按 P 設定供應商，或按 M 查看模型路由。", |
| 1074 | "SetupProviderModelNeedsActionHint": "按 Enter 將供應商/模型記錄為需要操作並繼續；按 P 修復憑證，或按 M 檢查路由。", |
| 1075 | "SetupProviderModelReviewed": "供應商/模型就緒狀態已記錄。", |
| 1076 | "SetupProviderModelNeedsActionSaved": "供應商/模型仍需操作；已記錄到設定報告。", |
| 1077 | "SetupRuntimePostureBoundary": "權限是強制生效的設定；憲章指引不會悄悄變更權限。", |
| 1078 | "SetupRuntimePostureReviewHint": "按 Enter 記錄此設定快照；按 M 選擇模式，或按 C 查看設定。", |
| 1079 | "SetupRuntimePostureReviewed": "已檢視權限；未更改任何設定。", |
| 1080 | "SetupRuntimePresetSelectedLabel": "已選預設：", |
| 1081 | "SetupRuntimePresetDiffLabel": "設定差異：", |
| 1082 | "SetupRuntimePresetAskFirstTitle": "先詢問", |
| 1083 | "SetupRuntimePresetAskFirstDescription": "預設 Plan、隱藏 shell、唯讀沙箱。", |
| 1084 | "SetupRuntimePresetNormalAgentTitle": "一般 Agent", |
| 1085 | "SetupRuntimePresetNormalAgentDescription": "預設 Agent、顯示核准提示、shell 可見。", |
| 1086 | "SetupRuntimePresetHighTrustTitle": "高信任本機", |
| 1087 | "SetupRuntimePresetHighTrustDescription": "可信本機工作預設完整存取；憲章不會被隱性更改。", |
| 1088 | "SetupRuntimePresetPreviewTitle": "權限預設預覽", |
| 1089 | "SetupRuntimePresetSafetyFloor": "安全底線：認證/OAuth 失敗、政策封鎖、類似發布的操作，以及需人工審核的關卡仍可停止執行。", |
| 1090 | "SetupRuntimePresetApplyHint": "按 A 預覽這個確切差異；預覽後再按 A 套用。", |
| 1091 | "SetupRuntimePresetApplied": "執行階段預設已套用。", |
| 1092 | "SetupRuntimeProjectOverrideLabel": "專案覆寫：", |
| 1093 | "SetupRuntimeProjectOverrideNone": "未偵測到 approval_policy 或 sandbox_mode 覆寫", |
| 1094 | "SetupReportFirstRunLabel": "首次執行：", |
| 1095 | "SetupReportUpdateLabel": "更新檢查點：", |
| 1096 | "SetupReportOperateLabel": "Operate/Fleet：", |
| 1097 | "SetupReportSourceLabel": "來源：", |
| 1098 | "SetupReportAutonomyLabel": "憲章自主性：", |
| 1099 | "SetupReportRuntimePostureLabel": "權限：", |
| 1100 | "SetupReportPersisted": "已持久化的 setup_state.json", |
| 1101 | "SetupReportInherited": "由現有設定推導", |
| 1102 | "SetupReportReady": "就緒", |
| 1103 | "SetupReportRequired": "必填", |
| 1104 | "SetupReportOptional": "可選", |
| 1105 | "SetupReportRowsLabel": "步驟狀態：", |
| 1106 | "SetupReportNextActionLabel": "下一步：", |
| 1107 | "SetupReportNextActionNone": "未記錄阻塞中的設定操作。", |
| 1108 | "SetupReportNextActionConstitution": "完成憲章檢查點，或選擇內建/預設。", |
| 1109 | "SetupReportNextActionProvider": "檢視供應商/模型就緒狀態，或執行 /setup provider；若要指定供應商，請用 /provider setup <name>。", |
| 1110 | "SetupReportNextActionRuntime": "檢視權限，或使用 /settings。", |
| 1111 | "SetupReportNextActionOperate": "在長時間的多代理執行前，先檢視 Operate 與 Fleet 的就緒狀態。", |
| 1112 | "SetupReportNextActionRequired": "檢視剩餘必填設定步驟。", |
| 1113 | "SetupReportRecorded": "設定報告已記錄。", |
| 1114 | "CtxMenuTitle": " 右鍵選單 ", |
| 1115 | "CtxMenuCopySelection": "複製所選", |
| 1116 | "CtxMenuCopySelectionDesc": "將選中的記錄區域文字寫入剪貼板", |
| 1117 | "CtxMenuOpenSelection": "開啟所選", |
| 1118 | "CtxMenuOpenSelectionDesc": "在翻閱器中檢視選中文字", |
| 1119 | "CtxMenuClearSelection": "清除選擇", |
| 1120 | "CtxMenuOpenDetails": "開啟詳情", |
| 1121 | "CtxMenuCopyMessage": "複製訊息", |
| 1122 | "CtxMenuCopyMessageDesc": "將點擊的記錄條目寫入剪貼板", |
| 1123 | "CtxMenuOpenInEditor": "在編輯器中開啟", |
| 1124 | "CtxMenuOpenInEditorDesc": "在 $EDITOR 中開啟 file:line", |
| 1125 | "CtxMenuShowCell": "顯示條目", |
| 1126 | "CtxMenuShowCellDesc": "取消隱藏此記錄條目", |
| 1127 | "CtxMenuHideCell": "隱藏條目", |
| 1128 | "CtxMenuHideCellDesc": "折疊此記錄條目", |
| 1129 | "CtxMenuShowHidden": "顯示已隱藏", |
| 1130 | "CtxMenuShowHiddenDesc": "取消隱藏所有已折疊條目", |
| 1131 | "CtxMenuPaste": "粘貼", |
| 1132 | "CtxMenuPasteDesc": "將剪貼板插入輸入框", |
| 1133 | "CtxMenuCmdPalette": "指令面板", |
| 1134 | "CtxMenuCmdPaletteDesc": "指令、技能和工具", |
| 1135 | "CtxMenuContextInspector": "上下文檢查器", |
| 1136 | "CtxMenuContextInspectorDesc": "活動上下文和快取提示", |
| 1137 | "CtxMenuHelp": "說明", |
| 1138 | "CtxMenuHelpDesc": "快捷鍵和指令", |
| 1139 | "CtxMenuWindowPin": "縮小並置頂", |
| 1140 | "CtxMenuWindowUnpin": "還原視窗", |
| 1141 | "CmdPinDescription": "置頂/還原目前視窗（小窗模式）", |
| 1142 | "CtxMenuWindowPinDesc": "置頂/還原目前視窗", |
| 1143 | "CtxMenuRunCommand": "執行 {command}", |
| 1144 | "CtxMenuOpen": "開啟", |
| 1145 | "CtxMenuFocusAgent": "聚焦此代理", |
| 1146 | "CtxMenuFocusAgentDesc": "顯示其對話；下一則訊息將傳給它", |
| 1147 | "CtxMenuCopyId": "複製 ID", |
| 1148 | "CtxMenuCopyRow": "複製此列", |
| 1149 | "CtxMenuStopAgent": "停止代理…", |
| 1150 | "CtxMenuStopWork": "停止…", |
| 1151 | "CtxMenuConfirmArmed": "{label}：按 Enter 或再次點擊確認", |
| 1152 | "CtxMenuEditorRefused": "未開啟 {path}：它已不再是工作區內的檔案", |
| 1153 | "WindowPinActive": "已置頂小窗", |
| 1154 | "WindowPinReleased": "已還原視窗", |
| 1155 | "WindowPinFailed": "視窗變更失敗或無法確認。請查看記錄瞭解詳情。", |
| 1156 | "FanoutCounts": "{done} 已完成 · {running} 運行中 · {failed} 失敗 · {pending} 等待中", |
| 1157 | "AppModeAgent": "Work", |
| 1158 | "AppModeAuto": "自動", |
| 1159 | "AppModeYolo": "完整存取（已棄用標籤）", |
| 1160 | "AppModePlan": "Plan", |
| 1161 | "AppModeOperate": "Operate", |
| 1162 | "AppModeAgentHint": "在本工作階段直接工作 — 編輯與 shell 需核准", |
| 1163 | "AppModeAutoHint": "啟用 shell，並自動進行風險審查", |
| 1164 | "AppModePlanHint": "先唯讀調研，行動前提出計畫", |
| 1165 | "AppModeYoloHint": "僅為相容保留 — Work + 完整存取，不是可見模式", |
| 1166 | "AppModeOperateHint": "把你的提示詞變成目標：並行代理，經過驗證的成果", |
| 1167 | "VimModeNormal": "-- 一般 --", |
| 1168 | "VimModeInsert": "-- 插入 --", |
| 1169 | "VimModeVisual": "-- 可視 --", |
| 1170 | "ApprovalEffectReadsOnly": "唯讀", |
| 1171 | "ApprovalEffectChangesFiles": "修改檔案", |
| 1172 | "ApprovalRiskDestructive": "無法復原", |
| 1173 | "ApprovalEffectRunsCommand": "執行指令", |
| 1174 | "ApprovalEffectUsesNetwork": "使用網路", |
| 1175 | "ApprovalEffectConnectedApp": "使用已連接的應用程式", |
| 1176 | "ApprovalEffectStartsAgent": "啟動代理", |
| 1177 | "ApprovalEffectUnclassified": "未分類工具", |
| 1178 | "ApprovalTimedOutDenied": "核准請求逾時 - 已拒絕", |
| 1179 | "ApprovalCategorySafe": "安全", |
| 1180 | "ApprovalCategoryFileWrite": "檔案寫入", |
| 1181 | "ApprovalCategoryShell": "指令", |
| 1182 | "ApprovalCategoryNetwork": "網路", |
| 1183 | "ApprovalCategoryMcpRead": "已連接的應用程式", |
| 1184 | "ApprovalCategoryMcpAction": "已連接的應用程式", |
| 1185 | "ApprovalCategoryAgent": "代理", |
| 1186 | "ApprovalCategoryUnknown": "未知", |
| 1187 | "ApprovalFieldType": "類型： ", |
| 1188 | "ApprovalFieldAbout": "說明： ", |
| 1189 | "ApprovalFieldImpact": "影響： ", |
| 1190 | "ApprovalFieldParams": "參數： ", |
| 1191 | "ApprovalOptionApproveOnce": "僅允許一次", |
| 1192 | "ApprovalOptionApproveAlways": "在本次對話中允許", |
| 1193 | "ApprovalOptionAllowExactRepo": "在此儲存庫中一律允許", |
| 1194 | "ApprovalSaveAskRuleHint": " s 本次允許，以後每次先詢問", |
| 1195 | "ApprovalOptionDeny": "不允許", |
| 1196 | "ApprovalOptionAbortTurn": "停止本回合", |
| 1197 | "ApprovalBlockTitle": "核准", |
| 1198 | "ApprovalControlsHint": " · Pg↑/↓ 回看 · {details} 詳情 · Esc 停止", |
| 1199 | "ApprovalOwnerHeader": "代理：{agent} · {role}", |
| 1200 | "ApprovalGoToAgent": "g 前往代理", |
| 1201 | "ApprovalControlsHintChild": " · Pg↑/↓ 回看 · {details} 詳情 · Esc 隱藏", |
| 1202 | "PendingApprovalInAgent": "{agent} 需要核准 — /agents", |
| 1203 | "ApprovalTruncationHint": " … 已截斷 · 按 {details} 查看完整內容", |
| 1204 | "ApprovalFullAccessPolicyBlocked": "已阻止 {tool}：Full Access 無法繞過此政策", |
| 1205 | "ApprovalChooseHint": "選擇： ", |
| 1206 | "ApprovalChooseAction": "Enter 執行選中項，或直接按 y/a/d", |
| 1207 | "ApprovalIntentLabel": "意圖： ", |
| 1208 | "ApprovalMoreLines": " … (還有 {count} 行)", |
| 1209 | "ApprovalAutoDeniedSession": "已自動拒絕 {tool}：本回合中已有相符請求被你拒絕。若要重新詢問，請傳送新訊息。", |
| 1210 | "ElevationTitleSandboxDenied": " ⚠ 沙箱拒絕 ", |
| 1211 | "ElevationTitleRequired": " 沙箱提權 ", |
| 1212 | "ElevationFieldTool": " 工具： ", |
| 1213 | "ElevationFieldCmd": " 指令： ", |
| 1214 | "ElevationFieldReason": " 原因： ", |
| 1215 | "ElevationImpactHeader": " 核准後的影響：", |
| 1216 | "ElevationImpactNetwork": " - 網路重試允許外部下載和 HTTP 請求", |
| 1217 | "ElevationImpactWrite": " - 寫入重試擴大此工具呼叫的檔案系統寫入範圍", |
| 1218 | "ElevationImpactFullAccess": " - 完全訪問解除沙箱限制", |
| 1219 | "ElevationPromptProceed": " 請選擇處理方式：", |
| 1220 | "ElevationOptionNetwork": "允許外部網路訪問", |
| 1221 | "ElevationOptionWrite": "允許額外寫入權限", |
| 1222 | "ElevationOptionFullAccess": "完全訪問（檔案系統 + 網路）", |
| 1223 | "ElevationOptionAbort": "中止", |
| 1224 | "ElevationOptionNetworkDesc": "使用外部網路訪問重試此工具呼叫（下載和 HTTP 請求）", |
| 1225 | "ElevationOptionWriteDesc": "重試此工具呼叫，擴大可寫入的檔案系統範圍", |
| 1226 | "ElevationOptionFullAccessDesc": "無沙箱限制重試（授予無限制的檔案系統和網路訪問權限）", |
| 1227 | "ElevationOptionAbortDesc": "取消此工具呼叫", |
| 1228 | "ContextAutoCompacting": "正在壓縮對話上下文以騰出空間…", |
| 1229 | "ContextManualCompacting": "正在壓縮上下文…", |
| 1230 | "ContextCompactionQueued": "上下文壓縮已排入佇列，將在本回合結束後執行。", |
| 1231 | "ContextCompactionAlreadyRunning": "上下文壓縮已在進行中。", |
| 1232 | "ContextCompactionQueueFull": "上下文壓縮需要等待：引擎忙碌中。請在本回合結束後再試一次。", |
| 1233 | "ContextCompactionQueueClosed": "無法壓縮上下文：引擎已停止。", |
| 1234 | "ContextCompactionRouteInvalid": "無法壓縮，因為目前的供應商路由無效：{error}", |
| 1235 | "CtxInspTitle": "上下文檢查器", |
| 1236 | "CtxInspSessionContext": "工作階段上下文", |
| 1237 | "CtxInspSystemPrompt": "系統提示結構", |
| 1238 | "CtxInspReferences": "引用", |
| 1239 | "CtxInspRecentTools": "最近使用的工具", |
| 1240 | "CtxInspToolSchemaCosts": "工具結構描述成本", |
| 1241 | "CtxInspModel": "模型", |
| 1242 | "CtxInspWorkspace": "工作區", |
| 1243 | "CtxInspSession": "工作階段", |
| 1244 | "CtxInspContext": "上下文", |
| 1245 | "CtxInspTranscript": "記錄", |
| 1246 | "CtxInspWorkspaceStatus": "工作區狀態", |
| 1247 | "CtxInspNotSampledYet": "尚未取樣", |
| 1248 | "CtxInspOk": "正常", |
| 1249 | "CtxInspHigh": "較高", |
| 1250 | "CtxInspCritical": "嚴重", |
| 1251 | "CtxInspIncluded": "已包含", |
| 1252 | "CtxInspAttached": "已附加", |
| 1253 | "CtxInspNotIncluded": "未包含", |
| 1254 | "CtxInspOutputCaptured": "已捕獲輸出", |
| 1255 | "CtxInspNoOutputYet": "尚無輸出", |
| 1256 | "CtxInspNoSystemPrompt": "未設定系統提示。", |
| 1257 | "CtxInspNoReferences": "尚未記錄任何檔案、目錄或媒體引用。", |
| 1258 | "CtxInspNoToolActivity": "尚未記錄任何工具活動。", |
| 1259 | "CtxInspVHint": "開啟對應的卡片並按 {details} 檢視詳細資訊。", |
| 1260 | "CtxInspCells": "儲存格", |
| 1261 | "CtxInspApiMessages": "API 訊息", |
| 1262 | "CtxInspActive": "作用中", |
| 1263 | "CtxInspCell": "儲存格", |
| 1264 | "CtxInspMoreReferences": "其他引用", |
| 1265 | "CtxInspStablePrefix": "穩定前綴", |
| 1266 | "CtxInspVolatileWorkingSet": "易變工作集", |
| 1267 | "CtxInspFirstLine": "第一行", |
| 1268 | "CtxInspTotal": "總計", |
| 1269 | "CtxInspTextPromptLayers": "文字提示層", |
| 1270 | "CtxInspSingleTextBlob": "單一文字塊", |
| 1271 | "CtxInspBlocks": "個區塊", |
| 1272 | "CtxInspBlock": "個區塊", |
| 1273 | "CtxInspTokens": "個 token", |
| 1274 | "CtxInspLayers": "個層", |
| 1275 | "CtxInspNone": "無", |
| 1276 | "CtxInspEmpty": "(空)", |
| 1277 | "CtxInspCacheFriendly": "快取友好", |
| 1278 | "CtxInspChangesByTurn": "按工作階段/回合變化", |
| 1279 | "CtxInspStablePrefixOnly": "僅穩定前綴", |
| 1280 | "CtxInspCacheTip": "提示：當目前的供應商支援前綴快取時，穩定前綴區塊可被快取。易變工作集的更改僅會破壞快取尾部。", |
| 1281 | "ToolFamilyRead": "讀取", |
| 1282 | "ToolFamilyPatch": "修補", |
| 1283 | "ToolFamilyRun": "執行", |
| 1284 | "ToolFamilyFind": "搜尋", |
| 1285 | "ToolFamilyDelegate": "代理", |
| 1286 | "ToolFamilyFanout": "扇出", |
| 1287 | "ToolFamilyRlm": "rlm", |
| 1288 | "ToolFamilyVerify": "驗證", |
| 1289 | "ToolFamilyThink": "思考", |
| 1290 | "ToolFamilyGeneric": "工具", |
| 1291 | "ToolReceiptDone": "完成", |
| 1292 | "ToolReceiptLinesSingular": "1 行", |
| 1293 | "ToolReceiptLinesPlural": "{count} 行", |
| 1294 | "CmdVoiceDescription": "切換語音輸入：錄製語音並轉錄為文字", |
| 1295 | "CmdVoiceSendDescription": "切換語音自動傳送：說出「send it」即可提交", |
| 1296 | "CmdVoiceControlDescription": "切換語音控制：能理解你草稿內容的聽寫", |
| 1297 | "VoiceEnabled": "語音輸入已開啟，開始說話即可錄製", |
| 1298 | "VoiceDisabled": "語音輸入已關閉", |
| 1299 | "VoiceSendEnabled": "語音自動傳送已開啟", |
| 1300 | "VoiceSendDisabled": "語音自動傳送已關閉", |
| 1301 | "VoiceControlEnabled": "語音控制已開啟", |
| 1302 | "VoiceControlDisabled": "語音控制已關閉", |
| 1303 | "VoiceErrNoAuth": "語音：目前供應商未設定 API 金鑰", |
| 1304 | "VoiceErrNoRecorder": "語音：未找到錄音工具，請安裝 sox、arecord 或 rec", |
| 1305 | "VoiceErrNetwork": "語音：轉錄請求失敗", |
| 1306 | "VoiceErrEmptySend": "語音：沒有可傳送的內容", |
| 1307 | "VoiceErrTooShort": "語音：未偵測到有效語音，錄製時間過短", |
| 1308 | "VoiceRecording": "🎙 正在錄音...請說話", |
| 1309 | "VoiceRecordingStopHint": "停頓即可結束", |
| 1310 | "VoiceProcessing": "🎙 正在轉錄...", |
| 1311 | "VoiceTranscribed": "🎙 轉錄完成", |
| 1312 | "NotificationTurnComplete": "本回合已完成", |
| 1313 | "NotificationSubagentComplete": "代理已完成", |
| 1314 | "NotificationSubagentFailed": "代理失敗", |
| 1315 | "NotificationSubagentInterrupted": "代理已中斷", |
| 1316 | "NotificationSubagentCancelled": "代理已取消", |
| 1317 | "NotificationSubagentBudgetExhausted": "代理預算已用盡", |
| 1318 | "NotificationShellFinished": "Shell 已完成", |
| 1319 | "NotificationShellFailed": "Shell 失敗", |
| 1320 | "NotificationShellStopped": "Shell 已停止", |
| 1321 | "NotificationTaskFinished": "任務已完成", |
| 1322 | "NotificationTaskFailed": "任務失敗", |
| 1323 | "NotificationTaskStopped": "任務已停止", |
| 1324 | "NotificationBackgroundFinished": "{count} 項已完成", |
| 1325 | "NotificationBackgroundMixed": "{done} 項完成 · {failed} 項失敗", |
| 1326 | "BackgroundFinishedHeading": "已結束 {count}", |
| 1327 | "BackgroundFinishedHint": "開啟項目查看輸出", |
| 1328 | "BackgroundOutcomeDone": "完成", |
| 1329 | "BackgroundOutcomeFailed": "失敗", |
| 1330 | "BackgroundOutcomeCancelled": "已取消", |
| 1331 | "BackgroundOutcomeKilled": "已終止", |
| 1332 | "BackgroundOutcomeTimedOut": "已逾時", |
| 1333 | "BackgroundExitCode": "結束代碼 {code}", |
| 1334 | "BackgroundQuiet": "無進展 {idle} · {bound}後自動停止", |
| 1335 | "BackgroundUsingTool": "正在使用 {tool}", |
| 1336 | "BackgroundStep": "步驟 {step}", |
| 1337 | "BackgroundFilesChanged": "已變更 {count} 個檔案", |
| 1338 | "NotificationBackgroundStopped": "完成 {done} · 失敗 {failed} · 停止 {stopped}", |
| 1339 | "NotificationFullResultPointer": "完整結果請在 Codewhale 中查看", |
| 1340 | "FooterWorkedChip": "已運行{duration}", |
| 1341 | "FooterPermissionKeyHint": "{key} 切換", |
| 1342 | "ApprovalSummaryRunCommand": "執行 `{command}`", |
| 1343 | "ApprovalSummaryRunShell": "執行一條 shell 指令", |
| 1344 | "ApprovalSummaryShellWait": "等待正在執行的 shell 指令", |
| 1345 | "ApprovalSummaryShellInput": "向正在執行的 shell 指令傳送輸入", |
| 1346 | "ApprovalSummaryShellStop": "停止正在執行的 shell 指令", |
| 1347 | "ApprovalSummaryWritePath": "寫入 {path}", |
| 1348 | "ApprovalSummaryWriteFile": "寫入檔案", |
| 1349 | "ApprovalSummaryEditPath": "編輯 {path}", |
| 1350 | "ApprovalSummaryEditFile": "編輯檔案", |
| 1351 | "ApprovalSummaryEditPathMore": "編輯 {path} 及另外 {count} 個檔案", |
| 1352 | "ApprovalSummaryApplyPatch": "套用修補", |
| 1353 | "ApprovalSummaryReadPath": "讀取 {path}", |
| 1354 | "ApprovalSummaryReadFile": "讀取檔案", |
| 1355 | "ApprovalSummaryListPath": "列出 {path}", |
| 1356 | "ApprovalSummaryListWorkspace": "列出工作區", |
| 1357 | "ApprovalSummaryFetchUrl": "擷取 {url}", |
| 1358 | "ApprovalSummaryFetchPage": "擷取網頁", |
| 1359 | "ApprovalSummarySearchQuery": "在網路上搜尋「{query}」", |
| 1360 | "ApprovalSummarySearchWeb": "在網路上搜尋", |
| 1361 | "ApprovalSummaryImageQuery": "在網路上搜尋「{query}」的圖片", |
| 1362 | "ApprovalSummaryOpenTarget": "開啟 {target}", |
| 1363 | "ApprovalSummaryMore": " （另 {count} 項）", |
| 1364 | "ApprovalSummaryFollowLink": "開啟已開啟頁面上的連結", |
| 1365 | "ApprovalSummaryFindOnPage": "在已開啟的頁面上尋找「{pattern}」", |
| 1366 | "ApprovalSummaryScreenshot": "擷取已開啟頁面的螢幕截圖", |
| 1367 | "ApprovalSummaryBrowse": "瀏覽網頁", |
| 1368 | "ApprovalSummaryMcpTool": "使用 {server} 的 {tool}", |
| 1369 | "ApprovalSummaryUseName": "使用 {name}", |
| 1370 | "ApprovalSummaryUseTool": "使用 {name} 工具", |
| 1371 | "FleetDraftTitle": "Fleet 設定 — 由 {model_label} 起草（按 g 儲存）", |
| 1372 | "FleetDraftHeader": "# .codewhale/agents/{name}\n# 由 {model_label} 起草，並由 Codewhale 校驗與限界。\n# 權限保持在 Fleet 底線：無 shell、無 trust、需核准。\n# 在向導中按 g 之前不會儲存任何內容。\n\n", |
| 1373 | "SetupRemoteOnRampText": "遠端執行階段入口\n\n/setup 只顯示遠端執行階段事實，不會產生部署包、寫入憑證、呼叫雲端 CLI 或執行 `remote-setup`。\n\n目前事實：\n- 雲端：{clouds_result}\n- 橋接：{bridges_result}\n- 供應商：{providers_result}\n- 模式：{mode_result}\n\n產生部署包時，請在一般終端機明確執行：\n\n```sh\n{command}\n```\n\n產生的 RUNBOOK 會包含需要人工複核的主機步驟。`--apply` 仍未實作；不要把它當成自動部署。", |
| 1374 | "ApprovalDescSafe": "請求執行唯讀操作。", |
| 1375 | "ApprovalDescFileWrite": "請求修改檔案。請確認路徑和內容符合預期。", |
| 1376 | "ApprovalDescShell": "請求執行 shell 指令。請先檢查指令和工作目錄。", |
| 1377 | "ApprovalDescNetwork": "請求存取網路或遠端內容。請確認目標可信。", |
| 1378 | "ApprovalDescMcpRead": "請求從已連接的應用程式讀取資訊。", |
| 1379 | "ApprovalDescMcpAction": "請求呼叫已連接應用程式的操作，可能產生副作用。", |
| 1380 | "ApprovalDescAgent": "請求啟動或檢視代理；代理仍會自行請求核准。", |
| 1381 | "ApprovalDescUnknown": "請求執行未分類工具。核准前請仔細檢查參數。", |
| 1382 | "ApprovalImpactSafe": "唯讀操作。", |
| 1383 | "ApprovalImpactFileWrite": "會寫入工作區或已核准寫入範圍內的檔案。", |
| 1384 | "ApprovalImpactShell": "在工作區執行 shell 指令。", |
| 1385 | "ApprovalImpactNetwork": "可能存取網路服務或遠端內容。", |
| 1386 | "ApprovalImpactMcpRead": "從已連接的應用程式讀取資訊，不應產生本地寫入。", |
| 1387 | "ApprovalImpactMcpAction": "呼叫可能產生副作用的已連接應用程式操作。", |
| 1388 | "ApprovalImpactAgent": "啟動或檢視代理；代理仍會自行請求核准。", |
| 1389 | "ApprovalImpactUnknown": "工具未分類。核准前請仔細檢查參數。", |
| 1390 | "ApprovalLabelCommand": "指令", |
| 1391 | "ApprovalLabelDir": "目錄", |
| 1392 | "ApprovalLabelFile": "檔案", |
| 1393 | "ApprovalLabelPreview": "預覽", |
| 1394 | "ApprovalLabelProposedContent": "擬寫入內容", |
| 1395 | "ApprovalLabelReplaceThis": "取代此內容", |
| 1396 | "ApprovalLabelWithThis": "取代為", |
| 1397 | "ApprovalLabelReplacementContent": "取代內容", |
| 1398 | "ApprovalLabelPath": "路徑", |
| 1399 | "ApprovalLabelTarget": "目標", |
| 1400 | "ApprovalLabelInput": "輸入", |
| 1401 | "ApprovalLabelAction": "操作", |
| 1402 | "ApprovalLabelType": "類型", |
| 1403 | "ApprovalLabelPrompt": "提示", |
| 1404 | "ApprovalLabelAbout": "說明： ", |
| 1405 | "ApprovalLabelImpact": "影響： ", |
| 1406 | "SetupConstitutionFileNotChecked": "尚未檢查", |
| 1407 | "SetupConstitutionFileMissing": "未找到 constitution.json；使用內建/預設憲章", |
| 1408 | "SetupConstitutionFileLoadedSelected": "有效 constitution.json 已存在並已選取", |
| 1409 | "SetupConstitutionFileLoadedInactive": "有效 constitution.json 已存在，但目前記錄的選擇使其不生效", |
| 1410 | "SetupConstitutionFileLoadedUnselected": "有效 constitution.json 已存在；預覽或儲存引導式憲章即可選取", |
| 1411 | "SetupConstitutionFileEmpty": "constitution.json 為空；按 G 重新產生或按 U 使用內建", |
| 1412 | "SetupConstitutionFileInvalid": "constitution.json 無效；請修復/重新產生，或使用內建", |
| 1413 | "SetupConstitutionFileUnreadable": "constitution.json 無法讀取；請修復/重新產生，或使用內建", |
| 1414 | "SetupConstitutionFilePathError": "無法解析 CODEWHALE_HOME 中的 constitution.json", |
| 1415 | "SetupExpertOverrideNotChecked": "尚未檢查", |
| 1416 | "SetupExpertOverrideMissing": "未找到 prompts/constitution.md", |
| 1417 | "SetupExpertOverrideActive": "已啟用；專家 Markdown 覆寫已選擇加入", |
| 1418 | "SetupExpertOverrideDisabled": "已找到檔案但未啟用；設定 {env}=1 後生效", |
| 1419 | "SetupExpertOverrideEmpty": "覆寫檔案為空；使用內建/預設憲章", |
| 1420 | "SetupExpertOverrideUnreadable": "覆寫檔案無法讀取；使用內建/預設憲章", |
| 1421 | "SetupExpertOverridePathError": "無法解析 CODEWHALE_HOME 中的 prompts/constitution.md", |
| 1422 | "SetupAutonomyUnspecified": "未指定或使用內建憲章", |
| 1423 | "SetupGuidedPurposeCoding": "編碼工作台", |
| 1424 | "SetupGuidedPurposeResearch": "研究整合", |
| 1425 | "SetupGuidedPurposeOperations": "營運協作", |
| 1426 | "SetupGuidedPurposeMixed": "混合工作台", |
| 1427 | "SetupGuidedPurposeAboutCoding": "希望 Codewhale 成為穩健、重證據的編碼工作台使用者。", |
| 1428 | "SetupGuidedPurposeAboutResearch": "希望 Codewhale 協助整理即時資料、引用證據並謹慎整合研究的使用者。", |
| 1429 | "SetupGuidedPurposeAboutOperations": "希望 Codewhale 協助可靠執行營運任務、保留回復點並明確說明風險的使用者。", |
| 1430 | "SetupGuidedPurposeAboutMixed": "希望 Codewhale 在編碼、研究、寫作和營運之間彈性切換的使用者。", |
| 1431 | "SetupGuidedStyleCoding": "讓程式碼改動貼近請求、倉庫模式和可驗證行為。", |
| 1432 | "SetupGuidedStyleResearch": "區分即時證據與推論，並為易變事實引用來源。", |
| 1433 | "SetupGuidedStyleOperations": "優先使用可逆營運步驟、預演、狀態檢查和回復說明。", |
| 1434 | "SetupGuidedStyleMixed": "可在編碼、研究、寫作和營運之間切換，且不會擴大權限。", |
| 1435 | "SetupGuidedEvidenceAssumptions": "說明假設", |
| 1436 | "SetupGuidedEvidenceTestsAndReceipts": "測試與回執", |
| 1437 | "SetupGuidedEvidenceReleaseReceipts": "發布回執", |
| 1438 | "SetupGuidedNotes": "引導式答案：用途={purpose}；主動性={initiative}；證據={evidence}；溝通={communication}；隱私={privacy}；原則={principles}。{notes} 自由文字原則只作為建議，不會改變核准、沙箱、Shell、網路、信任或 MCP 權限。", |
| 1439 | "SetupToolsMcpHotbarLabel": "快捷列來源：", |
| 1440 | "SetupToolsMcpNeedsActionSaved": "工具/MCP 仍需處理；已記錄到設定報告（不阻塞首次執行）。", |
| 1441 | "SetupToolsMcpPreviewTitle": "工具 / MCP 安全引導", |
| 1442 | "SetupToolsMcpOnRampText": "工具、MCP、技能與外掛 — 安全引導\n\n/setup 只讀取本機清單。它不會啟動 MCP 伺服器、安裝技能、執行外掛或執行不受信任的指令。\n\n目前清單：\n- MCP：{mcp_result}\n- 技能：{skills_result}\n- 工具目錄：{tools_result}\n- 外掛：{plugins_result}\n- 快捷列（共用轉接器）：{hotbar_result}\n\n路徑（家目錄已遮蔽）：\n- MCP 設定：{mcp_path}\n- 技能：{skills_path}\n- 外掛：{plugins_path}\n\n安全初始設定（請自行在一般終端機或 TUI 指令中執行）：\n- MCP：/mcp · codewhale mcp init · codewhale doctor\n- 技能：/skills · codewhale setup --skills · /skills install <spec>\n- 外掛：/plugin · codewhale setup --plugins\n- 工具目錄：codewhale setup --tools\n\n有副作用的操作一律需要明確確認。外掛指令與斜線指令仍保持區別；快捷列的外掛來源會等核准機制到位後才啟用。\n\n仍需手動完成的外部設定，請參閱 docs/MCP.md 和 docs/skills/README.md。", |
| 1443 | "SetupToolsMcpDshLabel": "DeepSeek Harness (dsh)：", |
| 1444 | "SetupToolsMcpDshRow": "DeepSeek Harness (dsh) — 透過 Codewhale 連接，絕不是第二個排程器：\n- 狀態：{dsh_result}\n- 唯讀偵測；連接/計畫/啟動/移除：codewhale integrations dsh status · plan · connect · launch · remove\n- Codewhale 只寫入 $CODEWHALE_HOME/integrations/dsh，絕不複製 API 金鑰或修改 DSH 檔案。", |
| 1445 | "HotbarActionModeOperateName": "Operate 模式", |
| 1446 | "HotbarActionModeOperateDescription": "讓 Fleet 並行展開工作。", |
| 1447 | "HomeOperateModeTip": "Operate — 讓 Fleet 並行展開工作", |
| 1448 | "HomeOperateModeFleetTip": " 內置角色使用本工作階段的模型；/fleet setup 可自定義", |
| 1449 | "HelpSubtitle": "指令、技能與快捷鍵", |
| 1450 | "CommandPaletteTitle": "指令", |
| 1451 | "CommandPaletteSubtitle": "查找並執行一個操作", |
| 1452 | "ConfigSubtitle": "設定優先；原始鍵在高級詳情", |
| 1453 | "LaunchStartTitle": "從這裡開始", |
| 1454 | "LaunchResumeConfirm": "恢復 {title}？再次點擊或按 Enter 確認。", |
| 1455 | "LaunchResumeConfirmTitle": "恢復工作階段", |
| 1456 | "LaunchResumeConfirmBody": "這會以該工作階段的歷史取代目前的上下文。", |
| 1457 | "LaunchResumeConfirmResume": "恢復", |
| 1458 | "LaunchResumeConfirmCancel": "取消", |
| 1459 | "LaunchWorkDescription": "在此資料夾中工作；變更遵循你的權限設定。", |
| 1460 | "LaunchChatDescription": "僅對話和規劃；不會變更檔案。", |
| 1461 | "LaunchWorkspaceGitReady": "工作區 · {name} · Git 工作區", |
| 1462 | "LaunchWorkspaceFolderReady": "工作區 · {name} · 本機資料夾", |
| 1463 | "LaunchProviderConfigured": "供應商 · 已設定", |
| 1464 | "LaunchProviderSetupNeeded": "供應商 · 需要設定", |
| 1465 | "LaunchGroupContinue": "繼續", |
| 1466 | "LaunchGroupMore": "更多", |
| 1467 | "LaunchWorkspaceGitShort": "Git", |
| 1468 | "LaunchWorkspaceFolderShort": "資料夾", |
| 1469 | "LaunchProviderConfiguredShort": "供應商已設定", |
| 1470 | "LaunchProviderSetupShort": "設定供應商", |
| 1471 | "LaunchMenuChangelog": "更新日誌", |
| 1472 | "LaunchWorktreePrompt": "為分支/工作樹命名，或按 Enter 使用自動名稱。 Esc 返回。", |
| 1473 | "LaunchWorktreeNeedsGit": "新建工作樹需要 Git 儲存庫。", |
| 1474 | "LaunchWorktreeNameLabel": "工作樹名稱", |
| 1475 | "LaunchHintMove": "移動", |
| 1476 | "LaunchHintOpen": "開啟", |
| 1477 | "LaunchTipFlags": "提示：-w <path> 開啟工作區；-r <session-id> 直接還原", |
| 1478 | "LaunchSavedSessionSingular": "已儲存 1 個工作階段", |
| 1479 | "LaunchSavedSessionsPlural": "已儲存 {count} 個工作階段", |
| 1480 | "LaunchCreatingWorktree": "正在建立工作樹…", |
| 1481 | "LaunchWorktreeFailed": "工作樹建立失敗：{error}", |
| 1482 | "LaunchWorktreeCreated": "新工作樹 {path}，分支 {branch}", |
| 1483 | "LaunchNoSavedSessions": "此工作區沒有已儲存的工作階段。", |
| 1484 | "LaunchNoModelConnected": "未連線模型", |
| 1485 | "DispatchNotSentNoModel": "尚未連接模型，因此這則訊息沒有送出。訊息已放回輸入框：用 F3 或 /provider 連接模型，然後按 Enter 送出。", |
| 1486 | "DispatchNotSentSaveKey": "儲存金鑰：{command}", |
| 1487 | "DispatchNotSentStatus": "訊息未送出：{reason}", |
| 1488 | "AuthRejectedRecovery": "供應商沒有接受該金鑰，因此模型沒有收到這則訊息。用 F3 或 /provider 更新金鑰，然後按 Enter 重新送出。", |
| 1489 | "ProviderKeyRejected": "供應商沒有接受此金鑰。請確認已完整複製，然後重新貼上。", |
| 1490 | "ProviderKeyForbidden": "供應商識別了此金鑰，但它無權使用此服務。請檢查金鑰權限或你的方案。", |
| 1491 | "ProviderKeyUnreachable": "無法連線到供應商來檢查此金鑰。請檢查網路連線，然後重試。", |
| 1492 | "ProviderKeyCheckFailed": "無法檢查此金鑰：{reason}", |
| 1493 | "LocalModelAdopted": "正在使用 {model}，這是在本機執行的模型（Ollama）。按 F3 可選擇其他模型。", |
| 1494 | "ProviderPickerNotReopened": "無法重新開啟供應商清單。按 F3 開啟。", |
| 1495 | "LaunchRunCommand": "執行 {command}", |
| 1496 | "LaunchMcpConnectedOne": "已連線 1 個 MCP 伺服器", |
| 1497 | "LaunchMcpConnectedMany": "已連線 {count} 個 MCP 伺服器", |
| 1498 | "LaunchMcpNeedsSignInOne": "1 個需要登入", |
| 1499 | "LaunchMcpNeedsSignInMany": "{count} 個需要登入", |
| 1500 | "PhaseIdle": "閒置", |
| 1501 | "PhaseDraft": "草稿", |
| 1502 | "PhaseWorking": "工作中", |
| 1503 | "PhaseReasoning": "推理中", |
| 1504 | "PhaseReading": "讀取中", |
| 1505 | "PhaseUsingTool": "使用工具中", |
| 1506 | "PhaseSubagents": "代理進行中", |
| 1507 | "PhaseVerifying": "校驗中", |
| 1508 | "PhaseWaitingOnYou": "需要你", |
| 1509 | "PhaseDone": "完成", |
| 1510 | "PhaseFailed": "失敗", |
| 1511 | "PhaseFinishing": "收尾中", |
| 1512 | "ChipModeAct": "work", |
| 1513 | "ChipModePlan": "plan", |
| 1514 | "ChipModeOperate": "operate", |
| 1515 | "ChipPermissionReadOnly": "唯讀", |
| 1516 | "ChipPermissionAsk": "ask", |
| 1517 | "ChipPermissionAuto": "auto", |
| 1518 | "ChipPermissionFullAccess": "Full Access", |
| 1519 | "ChipPermissionNever": "never", |
| 1520 | "FooterHintKeys": "快捷鍵", |
| 1521 | "FooterHintOutput": "輸出", |
| 1522 | "FooterHintContext": "上下文", |
| 1523 | "InfoLineHelp": "幫助", |
| 1524 | "InfoLineContext": "上下文", |
| 1525 | "InfoLineTtft": "ttft", |
| 1526 | "InfoLinePeak": "尖峰", |
| 1527 | "InfoLineOffPeak": "離峰", |
| 1528 | "InfoLineWhales": "鯨魚", |
| 1529 | "InfoLineAutomation": "自動化", |
| 1530 | "InfoLineNotConnected": "未連線", |
| 1531 | "InfoLineThinking": "思考：{level}", |
| 1532 | "EmptyStateNoGit": "無 git", |
| 1533 | "EmptyStateMcpLabel": "mcp", |
| 1534 | "EmptyStatePrompt": "你想完成什麼？", |
| 1535 | "SessionsSurfaceTitle": "工作階段", |
| 1536 | "SessionsPaneTitle": " 工作階段 (1-9, PgUp/PgDn) ", |
| 1537 | "SessionsHistoryPaneTitle": " 歷史 (Shift+PgUp/PgDn) ", |
| 1538 | "SessionsActionResume": "還原", |
| 1539 | "SessionsActionSearch": "搜尋", |
| 1540 | "SessionsActionSort": "排序", |
| 1541 | "SessionsActionRename": "重新命名", |
| 1542 | "SessionsActionAllWorkspaces": "所有工作區", |
| 1543 | "SessionsActionDelete": "刪除", |
| 1544 | "SessionsActionClose": "關閉", |
| 1545 | "SessionsScopeSortHeader": "範圍與排序 · {sort}", |
| 1546 | "SessionsEmptyTitle": "尚無已儲存的工作階段。", |
| 1547 | "SessionsEmptyHint": "傳送一條訊息即可開始；工作階段會自動儲存。", |
| 1548 | "SessionsShowingAllWorkspaces": "顯示所有工作區的工作階段", |
| 1549 | "SessionsScopedToWorkspace": "僅限目前工作區", |
| 1550 | "SessionsNewTitlePrompt": "新標題: ", |
| 1551 | "SessionsDeletePrompt": "刪除工作階段？(y/n)", |
| 1552 | "SessionsConfirmDelete": "確認刪除 (y/n)", |
| 1553 | "SessionsNewSessionTitle": "新工作階段", |
| 1554 | "SessionsOpenedHistory": "已開啟 {id} 的歷史紀錄", |
| 1555 | "SessionsSortStatus": "排序：{sort}", |
| 1556 | "SessionsSortRecent": "最近", |
| 1557 | "SessionsSortName": "名稱", |
| 1558 | "SessionsSortSize": "大小", |
| 1559 | "SessionsSearchPrompt": "搜尋：輸入篩選，Enter 套用", |
| 1560 | "SessionsDeleteFailed": "刪除失敗：{error}", |
| 1561 | "SessionsDeleteOpenHere": "無法刪除此處開啟的工作階段。請先切換到其他工作階段。", |
| 1562 | "SessionsDeleteOpenElsewhere": "無法刪除：此工作階段已在另一個 Codewhale 視窗中開啟。", |
| 1563 | "SessionSaveFailed": "無法儲存工作階段 {id}（{error}）。最近的工作可能尚未儲存。", |
| 1564 | "SessionSaveFailedAtExit": "codewhale: 工作階段 {id} 的最近一次儲存失敗（{error}）；最近的工作可能尚未儲存。", |
| 1565 | "SessionsDeleted": "已刪除工作階段 {id}", |
| 1566 | "SessionsNoSelection": "未選擇工作階段", |
| 1567 | "SessionsTitleLength": "標題長度須為 1–100 個字元", |
| 1568 | "SessionsOpenFailed": "無法開啟工作階段：{error}", |
| 1569 | "SessionsLoadFailed": "無法載入工作階段：{error}", |
| 1570 | "SessionsResumed": "已恢復工作階段：{title}", |
| 1571 | "SessionsRenameFailed": "重新命名失敗：{error}", |
| 1572 | "SessionsRenamed": "已重新命名為“{title}”", |
| 1573 | "SessionsNoResults": "未找到工作階段。", |
| 1574 | "SessionsDirectoryFailed": "無法開啟工作階段目錄。", |
| 1575 | "SessionsPreviewFailed": "無法載入工作階段預覽。", |
| 1576 | "SessionsDeleteCancelled": "已取消刪除", |
| 1577 | "SessionsRenameCancelled": "已取消重新命名", |
| 1578 | "SessionsShowingRange": "顯示 {start}-{end} / {total}", |
| 1579 | "SessionsMessageCountCompact": "{count} 條訊息", |
| 1580 | "SessionsForkCompact": "分叉", |
| 1581 | "SessionsCurrentCompact": "目前", |
| 1582 | "SessionsPreviewId": "ID：{id}", |
| 1583 | "SessionsUnknownMode": "未知", |
| 1584 | "SessionsPreviewTitle": "標題：{title}", |
| 1585 | "SessionsPreviewUpdated": "更新：{updated}", |
| 1586 | "SessionsPreviewMessagesModel": "訊息：{count} | 模型：{model}", |
| 1587 | "SessionsPreviewMode": "模式：{mode}", |
| 1588 | "SessionsToolCall": "工具呼叫：{name} {input}", |
| 1589 | "SessionsToolError": "工具錯誤：{content}", |
| 1590 | "SessionsToolResult": "工具結果：{content}", |
| 1591 | "SessionsServerTool": "伺服器工具：{name} {input}", |
| 1592 | "SessionsImage": "[圖片]", |
| 1593 | "SessionsTimeJustNow": "剛剛", |
| 1594 | "SessionsTimeMinutesAgo": "{count} 分鐘前", |
| 1595 | "SessionsTimeHoursAgo": "{count} 小時前", |
| 1596 | "SessionsTimeDaysAgo": "{count} 天前", |
| 1597 | "CtxInspRowSystemPrompt": "系統提示", |
| 1598 | "CtxInspRowMessages": "訊息", |
| 1599 | "CtxInspRowFree": "剩餘", |
| 1600 | "CtxInspFreeTokensDetail": "視窗佔滿前還剩 {free} 個可用 token。將在 {threshold}% 時壓縮上下文。", |
| 1601 | "CtxInspDrillTitle": "上下文 · {row}", |
| 1602 | "CtxInspSurfaceTitle": "上下文", |
| 1603 | "CtxInspActionSelect": "選擇", |
| 1604 | "CtxInspActionDrillDown": "下鑽", |
| 1605 | "CtxInspActionClose": "關閉", |
| 1606 | "CtxInspUsedTokens": "~{used}/{max} token", |
| 1607 | "CtxInspAutoCompactAt": "在 {threshold}% 時壓縮上下文", |
| 1608 | "CtxInspRowTokens": "{tokens} 個 token · {percent}%", |
| 1609 | "CtxInspRowCompaction": "壓縮", |
| 1610 | "CtxInspRowAnchors": "錨點", |
| 1611 | "CtxInspCompactionNever": "本工作階段尚未壓縮", |
| 1612 | "CtxInspCompactionDetail": "{path}。{before} → {after} 則訊息。上一回合：{round} 則訊息、{tools} 則工具結果{assistant}。", |
| 1613 | "CtxInspCompactionRestored": "存在檢查點。上一回合：{round} 則訊息、{tools} 則工具結果{assistant}。", |
| 1614 | "CtxInspCompactionPathSummary": "摘要通道", |
| 1615 | "CtxInspCompactionPathPrune": "僅裁剪", |
| 1616 | "CtxInspCompactionAssistantKept": "，已保留助理輸出", |
| 1617 | "CtxInspAnchorsNone": "沒有 /anchor 檔案", |
| 1618 | "CtxInspAnchorsPresent": "已固定 /anchor（{chars} 個字元）", |
| 1619 | "RouteSurfaceTitle": "路由 · {view}", |
| 1620 | "RouteBrowseCatalog": "瀏覽目錄", |
| 1621 | "RouteActionType": "輸入", |
| 1622 | "RouteActionSearchAnyModel": "搜尋任意模型", |
| 1623 | "RoutePanelHeader": "路由", |
| 1624 | "RouteProviderLabel": "供應商", |
| 1625 | "RouteModelFirstAtomic": "模型優先的原子路由", |
| 1626 | "PickerActionMove": "移動", |
| 1627 | "PickerActionSwitch": "切換", |
| 1628 | "PickerActionApply": "套用", |
| 1629 | "PickerActionAssignRoute": "指定", |
| 1630 | "FleetRoutePickUnavailable": "Fleet 已變更或不再可用。請重新開啟後再選擇模型。", |
| 1631 | "FleetRouteSaved": "已儲存：{fleet} · {route} · {path}", |
| 1632 | "FleetRouteInherited": "工作階段模型", |
| 1633 | "FleetRouteNotInCatalog": " · 不在目前目錄中", |
| 1634 | "PickerActionSetStartupDefault": "設為啟動預設值", |
| 1635 | "PickerActionPin": "釘選", |
| 1636 | "PickerActionFleet": "船隊", |
| 1637 | "PickerActionCancel": "取消", |
| 1638 | "PickerActionClear": "清除", |
| 1639 | "PickerActionClearSearch": "清除搜尋", |
| 1640 | "PickerActionBrowseAll": "瀏覽全部", |
| 1641 | "PickerActionCustom": "自定義", |
| 1642 | "PickerActionJump": "跳轉", |
| 1643 | "PickerActionEditKey": "編輯金鑰", |
| 1644 | "PickerActionModels": "模型", |
| 1645 | "PickerActionUnavailable": "無法使用", |
| 1646 | "PickerActionSetKey": "設定金鑰", |
| 1647 | "PickerActionConfigured": "已設定", |
| 1648 | "RouteNoModels": "沒有可用模型。", |
| 1649 | "RouteNoModelMatch": "沒有相符“{query}”的模型 — 按 Backspace 清除。", |
| 1650 | "ProviderNoMatchesTitle": "沒有相符的供應商", |
| 1651 | "ProviderNoMatchesHint": "嘗試其他搜尋詞，或清除後瀏覽。", |
| 1652 | "ProviderNoConfiguredTitle": "尚未設定供應商", |
| 1653 | "ProviderNoConfiguredHint": "瀏覽所有支援的供應商，或新增自訂端點。", |
| 1654 | "ProviderNoCatalogModels": "目錄中沒有可用模型。", |
| 1655 | "ProviderExternalActionRevoke": "停止使用該登入", |
| 1656 | "ProviderExternalActionChoices": "透過其他應用程式登入", |
| 1657 | "ProviderExternalActionReuseGrok": "重用外部 Grok 憑證", |
| 1658 | "ProviderExternalHintCodexReview": "完成 {login} 後，按 Enter 檢視停用、唯讀及受管存取選項。", |
| 1659 | "ProviderExternalHintXaiReview": "按 Enter 使用 Codewhale 自有的裝置登入；按 E 檢視重用現有 Grok CLI 憑證的選項。", |
| 1660 | "ProviderExternalHintXaiApiKey": "也可以使用XAI_API_KEY，然後重新開啟此選擇器。", |
| 1661 | "XaiAuthChoiceTitle": " xAI 身份驗證 ", |
| 1662 | "XaiAuthChoiceIntro": "請選擇一個明確的憑證來源。金鑰文字絕不會被當作 OAuth 權杖。", |
| 1663 | "XaiAuthChoiceApiKeyOption": "xAI API 金鑰 — 輸入或貼上，然後儲存至 xAI 供應商欄位", |
| 1664 | "XaiAuthChoiceDeviceOAuthOption": "原生裝置 OAuth — 透過瀏覽器/裝置代碼登入，並使用 Codewhale 自有儲存", |
| 1665 | "ChatgptAuthChoiceTitle": " ChatGPT / Codex 身分驗證 ", |
| 1666 | "ChatgptAuthChoiceIntro": "訂閱登入會計入你的 ChatGPT 方案。openai API 金鑰路徑屬於另一計費主體。", |
| 1667 | "ChatgptAuthChoicePkceOption": "以 ChatGPT 登入 — 瀏覽器 PKCE、Codewhale 自有權杖、ChatGPT 訂閱計費", |
| 1668 | "ChatgptAuthChoiceImportOption": "匯入 Codex CLI 憑證 — 明確唯讀授權；擁有者仍是 Codex CLI", |
| 1669 | "ProviderExternalHintChatgptReview": "按 Enter 以 ChatGPT 登入；按 E 檢視既有 Codex CLI 重用。", |
| 1670 | "ProviderExternalActionReuseCodex": "外部 Codex 重用", |
| 1671 | "ProviderExternalDetailScope": "外部憑證：存取={access} | 供應商={provider} | 來源={source} | 版本={version} | {state}", |
| 1672 | "ProviderExternalDormant": "休眠", |
| 1673 | "ProviderExternalOwnerPath": "所有者/路徑：{owner} | {path}", |
| 1674 | "ProviderExternalPinnedPathWarning": "警告：{owner} 目前的憑證路徑已更改；授權仍固定到 {path}。", |
| 1675 | "ToolProjectionWarning": "警告：{provider} 已在本次請求中省略不相容的工具：{tools}", |
| 1676 | "SnapshotsDisabledTooLarge": "此工作區 {workspace} 的快照與 /undo 已關閉：可快照的內容超過 {limit}。在 config.toml 中提高 `{config_key}`（或設為 0 取消上限）即可開啟。", |
| 1677 | "SnapshotsDisabledTooManyFiles": "此工作區 {workspace} 的快照與 /undo 已關閉：可快照的檔案超過 {limit} 個。此處與大小上限無關——在 `.gitignore` 中排除產生的目錄，或改在更小的子目錄中啟動，即可開啟。", |
| 1678 | "SnapshotsDisabledUnsafeLocation": "此工作區 {workspace} 的快照與 /undo 已關閉：主目錄或根目錄範圍過大，無法安全快照。請在專案目錄中啟動即可開啟。", |
| 1679 | "SnapshotsHistoryRepaired": "{workspace} 的復原歷史已損壞（缺少最新的還原點），已重新開始記錄。先前的還原點無法再還原；新的回合重新受到保護。", |
| 1680 | "SnapshotsFailing": "{workspace} 的快照持續失敗，因此 /undo 無法還原最近的回合：{limit}", |
| 1681 | "SessionIdDivergedNotice": "此視窗下的工作階段身分已更改：引擎現在以 {next} 儲存檢查點（之前為 {previous}）。較早的檢查點仍保留在舊 ID 下；`codewhale sessions` 會列出兩者，`codewhale resume {previous}` 可重新開啟較早的工作階段。", |
| 1682 | "RuntimeStoreUnreadableNotice": "工作階段執行階段儲存區：無法讀取 {path} 的 {record}（{reason}）。請將該檔案移開（或刪除）後重試；執行緒的其他記錄保持不變。", |
| 1683 | "RuntimeStoreUnwritableNotice": "工作階段執行階段儲存區：無法寫入 {path} 的 {record}（{reason}）。請檢查該位置的可用空間與權限後重試；沒有任何內容被覆寫。", |
| 1684 | "ProviderExternalSemanticsRevoke": "{semantics} | 復原：{revoke}", |
| 1685 | "ProviderExternalRevoke": "復原：{revoke}", |
| 1686 | "ProviderExternalChoiceTitle": " 外部憑證存取 · {provider} ", |
| 1687 | "ProviderExternalActionChoose": "選擇", |
| 1688 | "ProviderExternalChoiceIntro": "選擇 Codewhale 可以如何使用其他 CLI 擁有的憑證。", |
| 1689 | "ProviderExternalDisabledLabel": "停用（預設）", |
| 1690 | "ProviderExternalDisabledDetail": "不探測、不讀取、不重新整理、不聯網、不寫入", |
| 1691 | "ProviderExternalReadOnlyLabel": "使用外部 CLI 憑證（唯讀）", |
| 1692 | "ProviderExternalReadOnlyDetail": "僅限一個確切檔案；下一步需要明確確認", |
| 1693 | "ProviderExternalReadOnlySemantics": "僅讀取這一確切檔案；不更新權杖、不發起身分供應商或探索請求、不寫入或重寫外部檔案；向所選供應商發起的一般請求可以使用該權杖", |
| 1694 | "ProviderExternalManagedLabel": "託管（無法使用）", |
| 1695 | "ProviderExternalManagedDetail": "沒有經過審核且能安全保留架構的適配器", |
| 1696 | "ProviderExternalConfirmTitle": " 確認確切的唯讀存取 ", |
| 1697 | "ProviderExternalActionGrant": "授予唯讀存取", |
| 1698 | "ProviderExternalOwnerLabel": "所屬CLI", |
| 1699 | "ProviderExternalExactPathLabel": "確切解析路徑", |
| 1700 | "ProviderExternalSemanticsLabel": "語義", |
| 1701 | "ProviderExternalRejectUnsafe": "Codewhale將拒絕符號鏈接、重解析點和非常規檔案。", |
| 1702 | "ProviderExternalRevokeLabel": "復原", |
| 1703 | "ProviderExternalRouteLabel": "路由", |
| 1704 | "ProviderExternalCustodyLine": "保管：僅限本裝置 —— Codewhale 僅儲存此同意記錄，不儲存憑證；不使用帳戶或雲端保管庫。", |
| 1705 | "ProviderExternalBillingLine": "憑證與計費所有者：您的 {owner} 帳戶；用量由該帳戶計費。", |
| 1706 | "ProviderExternalRevokeScope": "撤銷僅清除本裝置上 Codewhale 的同意記錄；絕不會讀取、修改或刪除 {owner} 的檔案。", |
| 1707 | "ProviderExternalOwnerOnly": "所有者：{owner}", |
| 1708 | "ProviderExternalPinnedPathChanged": "警告：環境中的 {owner} 憑證路徑已變更；同意仍固定在已授權的路徑上。", |
| 1709 | "ProviderExternalRevokeConfirmTitle": " 撤銷外部憑證存取？ ", |
| 1710 | "ProviderExternalGrantedToast": "已為 {provider} 授予 {owner} 唯讀存取權限。不更新權杖、不發起身分/探索請求、不寫入外部檔案；一般供應商請求可以使用該權杖。", |
| 1711 | "ProviderExternalSaveFailedToast": "未儲存外部憑證同意：{error}", |
| 1712 | "ProviderExternalRevokedToast": "已撤銷 {provider} 的外部憑證存取權限", |
| 1713 | "ProviderExternalRevokeFailedToast": "未能撤銷外部憑證存取權限：{error}", |
| 1714 | "ThemeSurfaceTitle": "主題 · 實時預覽", |
| 1715 | "FleetRosterHeaderLabel": "Fleet", |
| 1716 | "FleetRosterTabRoster": "成員", |
| 1717 | "FleetRosterTabSetup": "設定", |
| 1718 | "FleetRosterWorkers": "代理", |
| 1719 | "FleetRosterMembersCount": "{count} 個成員", |
| 1720 | "FleetRosterOperatorFirst": "協調者統領 · 工作階段模型驅動此 Fleet", |
| 1721 | "FleetRosterOperatorRow": "協調者 · 你", |
| 1722 | "FleetRosterShadowBadgeProjectOverride": "已儲存到此專案", |
| 1723 | "FleetRosterShadowBadgePersonalIgnored": "已儲存副本被忽略", |
| 1724 | "FleetRosterShadowBadgePersonalOverride": "已儲存到所有專案", |
| 1725 | "FleetRosterShadowBadgeConfigOverride": "已儲存在設定中", |
| 1726 | "FleetRosterLayersLabel": "儲存位置", |
| 1727 | "FleetRosterLayerWins": "生效", |
| 1728 | "FleetRosterLayerIgnored": "被忽略的副本", |
| 1729 | "FleetReadyNotice": "Fleet 已就緒 · /fleet 開啟角色 · /fleet setup 調整成員模型", |
| 1730 | "FleetProfileIdentityVerifyFailed": "無法校驗現有設定標識（{error}）；請先修復列出的檔案再儲存。", |
| 1731 | "FleetProfileIdConflict": "設定 id `{id}` 已被 {path} 佔用；請重新起草為不同的角色或先移除舊檔案。", |
| 1732 | "FleetProfileProviderUnconfigured": "設定檔指定的供應商 `{provider}` 尚未設定憑證（{env}）；請先在 /provider 中設定，再儲存。", |
| 1733 | "FleetModelAdded": "已將 {route} 加入 Fleet `{fleet}`", |
| 1734 | "FleetModelAddedAs": "已將 {route} 作為 {roles} 加入 Fleet `{fleet}`", |
| 1735 | "FleetModelAddedCreatedNote": " （新的個人 Fleet，已選取）", |
| 1736 | "FleetModelAddedSelectedNote": " （已選取）", |
| 1737 | "FleetModelRemoved": "已將 {route} 從 Fleet `{fleet}` 移除", |
| 1738 | "FleetModelRemovedRoles": "已將 {route}（{roles}）從 Fleet `{fleet}` 移除", |
| 1739 | "FleetModelUnchanged": "{route} 保留在 Fleet `{fleet}` 中：{reason}", |
| 1740 | "FleetModelReasonOperatorRoute": "這是你目前的模型（Fleet 的協調者路由）；請切換模型或使用 /fleet save 變更", |
| 1741 | "FleetModelReasonAlreadyPresent": "已在 Fleet 中", |
| 1742 | "FleetModelErrorNeedsRoute": "Fleet 模型需要同時提供供應商 ID 和模型 ID", |
| 1743 | "FleetModelErrorNeedsRole": "代理需要一個角色名稱（例如 `/fleet add {route} scout`）。", |
| 1744 | "FleetModelErrorNoSelection": "未選取 Fleet；你的 Fleet 僅包含工作階段模型", |
| 1745 | "FleetModelErrorOperatorRoute": "{route} 是 Fleet `{fleet}` 的協調者路由；請用 /fleet save 變更，不能直接移除", |
| 1746 | "FleetModelErrorNotInFleet": "{route} 不在 Fleet `{fleet}` 中", |
| 1747 | "FleetModelsEmpty": "你的 Fleet 僅包含工作階段模型。新增一個：/fleet add <provider> <model> [role…]（或在 /model 的某一列按 ⇧F）。", |
| 1748 | "FleetModelsHeader": "你的 Fleet `{fleet}`（{count} 個模型）", |
| 1749 | "FleetModelsBroken": "無法載入所選的 Fleet：{error}。請修正檔案，或用 /fleet teams 選擇另一個。", |
| 1750 | "FleetModelsFooter": "新增：/fleet add <provider> <model> [role…] · 移除：/fleet remove <provider> <model>", |
| 1751 | "FleetModelsFactPrice": "${input}/{output} 每百萬 token", |
| 1752 | "FleetModelsFactContext": "{context}k ctx", |
| 1753 | "FleetModelsFactTools": "工具", |
| 1754 | "FleetAddUsage": "用法：/fleet add <provider> <model> [role…] — 例如 /fleet add openrouter z-ai/glm-5.3-flash explore", |
| 1755 | "FleetAddProviderUnconfigured": "`{provider}` 不是已設定的供應商。請先在 ~/.codewhale/config.toml 中設定，或用 /provider 切換到它，再加入 Fleet。", |
| 1756 | "FleetAddModelNotServed": "{provider} 在目前的目錄中不提供 `{model}`；執行 /models 查看它提供的模型，或用其列出的精確 ID 執行 /fleet add。", |
| 1757 | "FleetAddFailed": "無法加入 Fleet：{error}", |
| 1758 | "FleetRemoveUsage": "用法：/fleet remove <provider> <model>", |
| 1759 | "FleetRemoveFailed": "無法從 Fleet 移除：{error}", |
| 1760 | "FleetToggleFailed": "無法更新 Fleet：{error}", |
| 1761 | "FleetDestStepTitle": "這個設定檔應儲存在哪裡？", |
| 1762 | "FleetDestStepSubtitle": "在最後一步確認之前不會寫入任何內容。", |
| 1763 | "FleetDestProjectLabel": "此專案", |
| 1764 | "FleetDestPersonalLabel": "個人", |
| 1765 | "FleetDestProjectSummary": "僅此專案", |
| 1766 | "FleetDestPersonalSummary": "在所有專案中可用", |
| 1767 | "FleetDestProjectDescription": "優先於同 ID 的個人設定檔。", |
| 1768 | "FleetDestPersonalDescription": "若專案有同 ID 的自有設定檔，那裡以專案設定為準。", |
| 1769 | "FleetDestPathLine": "檔案: {path}", |
| 1770 | "FleetDestUnavailable": "無法使用: {reason}", |
| 1771 | "FleetDestReasonNoProjectConfig": "本次工作階段已停用專案設定檔 (--no-project-config)", |
| 1772 | "FleetDestReasonWorkspaceMissing": "工作區資料夾 {path} 不存在或不是目錄", |
| 1773 | "FleetDestReasonHomeUnavailable": "無法解析你的 Codewhale 主目錄 ({error})", |
| 1774 | "FleetDestWillReplace": "將取代現有檔案 {path}", |
| 1775 | "FleetDestOverridesProject": "此專案已有 '{id}' 設定檔，在此處以它為準；這個個人設定檔將在其他專案中生效。", |
| 1776 | "FleetDestOverridesPersonal": "在此專案內優先於你的個人 '{id}' 設定檔。", |
| 1777 | "FleetDestOverridesBuiltIn": "取代 Fleet 中的 {origin} '{id}' 角色。", |
| 1778 | "FleetSavesToChip": "儲存到: {scope} · {path}", |
| 1779 | "FleetSavesToUndecided": "儲存到: 在第 3 步選擇——此專案 或 個人", |
| 1780 | "FleetActionSaveProject": "儲存到此專案", |
| 1781 | "FleetActionSavePersonal": "儲存為個人設定檔", |
| 1782 | "FleetActionReplaceProject": "取代此專案中的檔案", |
| 1783 | "FleetActionReplacePersonal": "取代個人設定檔", |
| 1784 | "FleetActionConfirmReplace": "再按一次 Enter 以取代 {file}", |
| 1785 | "FleetActionChangeDestination": "變更儲存位置", |
| 1786 | "FleetActionBack": "返回", |
| 1787 | "FleetReviewSavesTo": "儲存到", |
| 1788 | "FleetModelRowBlockedNotice": "無法選擇: {reason}。請在 /provider 中設定或選擇其他列。", |
| 1789 | "FleetDestProjectDisabledSave": "本次工作階段已停用專案設定檔 (--no-project-config)；未儲存任何內容。請選擇個人，或不帶該參數重新啟動。", |
| 1790 | "WorkflowStatusWaiting": "等待中", |
| 1791 | "WorkflowStatusDegraded": "部分失敗", |
| 1792 | "WorkflowRunFailedToast": "工作流程執行失敗", |
| 1793 | "WorkflowDebrief": "覆盤：{done}/{total} 已完結 · {failed} 失敗 · {cancelled} 已取消 · {elapsed}", |
| 1794 | "WorkflowDispatchFailureLine": "調度失敗 · {slot}：{message}", |
| 1795 | "WorkflowDispatchFailuresOmitted": "調度失敗：另有 {count} 筆較早記錄未顯示", |
| 1796 | "WorkflowDispatchFallbackTask": "任務", |
| 1797 | "WorkflowTranscriptDetails": "記錄：完整執行 JSON 可在工具詳情中查看（{details}）", |
| 1798 | "WorkflowReceiptRole": "角色 {value}", |
| 1799 | "WorkflowReceiptReasoning": "思考 {value}", |
| 1800 | "WorkflowReceiptVia": "路由 {value}", |
| 1801 | "WorkflowReceiptTokens": "token {value}", |
| 1802 | "WorkflowReceiptTools": "工具 {value}", |
| 1803 | "WorkflowReceiptDuration": "時長 {value}", |
| 1804 | "WorkflowReceiptUnknown": "未知", |
| 1805 | "WorkflowReceiptProviderReported": "供應商報告", |
| 1806 | "WorkflowReceiptEstimated": "估算", |
| 1807 | "SidebarTasksLabel": "任務", |
| 1808 | "TaskOwnershipUnverified": "執行歸屬尚未驗證", |
| 1809 | "TaskInventoryUnavailable": "任務儲存空間無法使用，正在顯示最後已知的狀態。", |
| 1810 | "SidebarTodoLabel": "待辦", |
| 1811 | "WorkSurfaceTodoProgress": "{label} {completed}/{total} · 剩餘 {remaining}", |
| 1812 | "SidebarStopControl": "停止", |
| 1813 | "SidebarDestructiveArmed": "破壞性操作已就緒 — 按 Enter 確認，或清空草稿以取消", |
| 1814 | "WorkSurfaceStopConfirmHint": "確認停止 · Esc 取消", |
| 1815 | "CoordinationWorkTitle": "協調工作", |
| 1816 | "CoordinationSummaryDecisions": "{count} 項決策", |
| 1817 | "CoordinationSummaryContentions": "{count} 項爭用", |
| 1818 | "CoordinationSummaryReconciled": "{count} 項已調和", |
| 1819 | "CoordinationSchema": "架構 {value}", |
| 1820 | "CoordinationSequence": "序列 {value}", |
| 1821 | "CoordinationPerSectionLimit": "每個部分最多 {limit} 條", |
| 1822 | "CoordinationDecisionsHeading": "決策", |
| 1823 | "CoordinationNone": "無", |
| 1824 | "CoordinationNoneValue": "無", |
| 1825 | "CoordinationStatus": "狀態 {status}", |
| 1826 | "CoordinationOwner": "所有者 {owner}", |
| 1827 | "CoordinationVersion": "版本 {version}", |
| 1828 | "CoordinationWriteClaimsHeading": "寫入聲明", |
| 1829 | "CoordinationIsolated": "已隔離", |
| 1830 | "CoordinationSharedWorkspace": "共享工作區", |
| 1831 | "CoordinationPaths": "路徑 {paths}", |
| 1832 | "CoordinationContracts": "契約 {contracts}", |
| 1833 | "CoordinationContentionsHeading": "爭用", |
| 1834 | "CoordinationClaimant": "聲明方 {claimant}", |
| 1835 | "CoordinationDisposition": "處置 {disposition}", |
| 1836 | "CoordinationNeutralReconciliationHeading": "中立調和", |
| 1837 | "CoordinationCandidates": "{count} 個候選項", |
| 1838 | "CoordinationRetry": "重試 {count}/{limit}", |
| 1839 | "CoordinationReviewer": "審核者 {reviewer}", |
| 1840 | "CoordinationVerifier": "驗證者 {verifier}", |
| 1841 | "CoordinationVerification": "驗證 {verification}", |
| 1842 | "CoordinationContextProjectionsHeading": "上下文投影", |
| 1843 | "CoordinationContextDecisions": "決策 {decisions}", |
| 1844 | "CoordinationBytes": "{count} 字節", |
| 1845 | "CoordinationDeduplicated": "已去重 {count} 項", |
| 1846 | "CoordinationOmitted": "已省略 {count} 項", |
| 1847 | "CoordinationActiveHotPathsHeading": "活動熱點路徑", |
| 1848 | "CoordinationActiveClaims": "{count} 個活躍聲明", |
| 1849 | "CoordinationMetricsNoteHeading": "指標說明", |
| 1850 | "CoordinationMetricsNoAuthoritativeSource": "協調帳本沒有權威來源時，增長和路由/成本保持為 null", |
| 1851 | "CoordinationStatusProposed": "已提議", |
| 1852 | "CoordinationStatusAccepted": "已接受", |
| 1853 | "CoordinationStatusSuperseded": "已取代", |
| 1854 | "ComposerSlashMenuHint": " enter:執行 · tab:補全 · ↑↓:選擇 · esc:繼續輸入 ", |
| 1855 | "ApprovalRepoLawBadge": "儲存庫規則", |
| 1856 | "ApprovalRepoLawTitle": "儲存庫憲章", |
| 1857 | "ApprovalRepoLawWarning": "此儲存庫的憲章要求你確認這項變更。", |
| 1858 | "ApprovalRepoLawRuleLabel": "規則 ", |
| 1859 | "FilePickerMatchSingular": "@ 附加 · 1 個相符", |
| 1860 | "FilePickerMatchesPlural": "@ 附加 · {count} 個相符", |
| 1861 | "FilePickerScanning": "正在掃描工作區…", |
| 1862 | "BehavioralTipPlanning": "在規劃？按 {key} 可切換到 Plan 模式", |
| 1863 | "BehavioralTipBackgroundReceipt": "回執在 Work 面板中 — 按 {key} 開啟檢查器", |
| 1864 | "BehavioralTipClearedInput": "已清空 · 按 {chord} 還原", |
| 1865 | "BehavioralTipMcpValidation": "{command} 會啟動伺服器並顯示原因", |
| 1866 | "BehavioralTipRepeatedCommand": "{command} 可以固定此指令", |
| 1867 | "BehavioralTipDurableStateWritten": "已儲存 · {command} 可檢視", |
| 1868 | "BehavioralTipTodoWrite": "提示：使用 {command} 追蹤多步驟工作，讓進度清楚可見", |
| 1869 | "SettingLockedDuringTurn": "回合執行期間{setting}已鎖定 — 請先按 Esc 中斷", |
| 1870 | "SettingSubjectMode": "模式", |
| 1871 | "SettingSubjectThinking": "思考", |
| 1872 | "SettingSubjectModel": "模型", |
| 1873 | "SettingSubjectModelAndThinking": "模型與思考", |
| 1874 | "SettingSubjectProvider": "供應商", |
| 1875 | "SettingSubjectPermissions": "權限", |
| 1876 | "ThinkingControlledByAutoRouting": "思考由自動模型路由控制；請先選擇固定模型。", |
| 1877 | "SavedAsStartupDefault": "已儲存為啟動預設值", |
| 1878 | "ModeAlreadyActiveSavedAsDefault": "已處於 {mode} 模式 — 已儲存為啟動預設值。", |
| 1879 | "StartupDefaultNotSaved": "{setting}未能儲存：{error}", |
| 1880 | "StartupDefaultSubjectMode": "啟動模式", |
| 1881 | "StartupDefaultSubjectThinking": "思考級別", |
| 1882 | "StartupDefaultSubjectModel": "模型", |
| 1883 | "StartupDefaultSubjectAll": "啟動預設值", |
| 1884 | "SessionsRailTitle": "工作階段", |
| 1885 | "SessionsRailEmpty": "此工作區尚無工作階段", |
| 1886 | "SessionsRailBrowseAll": "瀏覽所有工作階段", |
| 1887 | "SessionsRailShowingCount": "{total} 個中的 {shown} 個 — 瀏覽全部", |
| 1888 | "SessionsRailUnavailable": "無法讀取工作階段：{error}", |
| 1889 | "SessionsActionArchive": "封存", |
| 1890 | "SessionsActionShowArchived": "已封存", |
| 1891 | "SessionsArchived": "已封存工作階段 {id}", |
| 1892 | "SessionsRestored": "已還原工作階段 {id}", |
| 1893 | "SessionsArchiveFailed": "封存失敗：{error}", |
| 1894 | "SessionsShowingArchived": "正在顯示已封存工作階段", |
| 1895 | "SessionsHidingArchived": "已隱藏封存工作階段", |
| 1896 | "SessionsArchivedCompact": "已封存", |
| 1897 | "KbReasoningDetail": "開啟所選或目前回合的推理詳情", |
| 1898 | "KbTurnInspector": "開啟回合檢查器 (Turn Inspector)", |
| 1899 | "CmdTurnInspectDescription": "開啟整個回合的檢查器", |
| 1900 | "CmdAutomationDescription": "管理排程自動化；list 開啟管理器", |
| 1901 | "AutomationUsage": "用法: /automation [list|show <id>|print <id>|pause <id>|resume <id>|delete <id> [--confirm <token>]|run <id>]", |
| 1902 | "AutomationManagerUnavailable": "此工作階段無法使用自動化管理器。", |
| 1903 | "AutomationListFailed": "無法列出自動化: {error}", |
| 1904 | "AutomationActionFailed": "無法{action}自動化 {id}: {error}", |
| 1905 | "AutomationEmpty": "目前沒有排定的自動化。請選擇「新增自動化」。", |
| 1906 | "AutomationListHeading": "已計劃的自動化", |
| 1907 | "AutomationScopeNote": "自動化屬於你，而不是這個儲存庫——它們會跟著你進入每個儲存庫。", |
| 1908 | "AutomationNoun": "自動化", |
| 1909 | "AutomationStatusLabel": "狀態", |
| 1910 | "AutomationStatusActive": "已啟用", |
| 1911 | "AutomationStatusPaused": "已暫停", |
| 1912 | "AutomationRunStatusQueued": "排隊中", |
| 1913 | "AutomationRunStatusRunning": "執行中", |
| 1914 | "AutomationRunStatusCompleted": "已完成", |
| 1915 | "AutomationRunStatusFailed": "失敗", |
| 1916 | "AutomationRunStatusCanceled": "已取消", |
| 1917 | "AutomationActionInspect": "檢視", |
| 1918 | "AutomationActionPause": "暫停", |
| 1919 | "AutomationActionResume": "恢復", |
| 1920 | "AutomationActionDelete": "刪除", |
| 1921 | "AutomationActionRun": "執行", |
| 1922 | "AutomationActionCancel": "取消執行", |
| 1923 | "AutomationActionPaused": "已暫停", |
| 1924 | "AutomationActionResumed": "已恢復", |
| 1925 | "AutomationNextLabel": "下次", |
| 1926 | "AutomationNameLabel": "名稱", |
| 1927 | "AutomationPromptLabel": "提示詞", |
| 1928 | "AutomationCwdLabel": "工作目錄", |
| 1929 | "AutomationModeLabel": "模式", |
| 1930 | "AutomationAllowShellLabel": "允許 Shell", |
| 1931 | "AutomationTrustModeLabel": "信任模式", |
| 1932 | "AutomationAutoApproveLabel": "auto_approve", |
| 1933 | "AutomationRruleLabel": "重複規則", |
| 1934 | "AutomationDeliveryLabel": "投遞", |
| 1935 | "AutomationLastLabel": "上次", |
| 1936 | "AutomationRecentRunsLabel": "最近執行", |
| 1937 | "AutomationNoRuns": "沒有執行記錄", |
| 1938 | "AutomationRunsUnavailable": "執行記錄不可用", |
| 1939 | "AutomationTaskLabel": "任務", |
| 1940 | "AutomationBandScheduled": "已排程", |
| 1941 | "AutomationReceiptFired": "已觸發", |
| 1942 | "AutomationReceiptStarted": "已在背景啟動", |
| 1943 | "AutomationReceiptCompleted": "已在背景完成", |
| 1944 | "AutomationReceiptCoalesced": "已合併", |
| 1945 | "AutomationReceiptMissed": "已錯過", |
| 1946 | "AutomationReceiptExpired": "已過期", |
| 1947 | "AutomationReceiptDeleted": "已刪除", |
| 1948 | "AutomationRunLabel": "執行", |
| 1949 | "AutomationDeletedRunsDetail": "已刪除執行記錄: {run_count}", |
| 1950 | "AutomationDeletePreview": "刪除尚未確認，未刪除任何內容。\n自動化: {id}（{name}）\n執行記錄: {run_count}\n要刪除定義與執行記錄，請執行:\n{command}", |
| 1951 | "AutomationDeleteConfirmationStale": "刪除確認與自動化 {id} 的目前狀態不再匹配，未刪除任何內容。請用 {command} 檢視目前狀態。", |
| 1952 | "WhaleStateResting": "休息中", |
| 1953 | "WhaleStateThinking": "思考中", |
| 1954 | "WhaleStateWorking": "工作中", |
| 1955 | "WhaleStateWaiting": "等待你", |
| 1956 | "WhaleStateBlocked": "已阻塞", |
| 1957 | "WhaleStateOffline": "離線", |
| 1958 | "AgentStatusParked": "已停放", |
| 1959 | "AgentStatusParkedRecovery": "沒有人在等待它；用 resume_from 繼續，或用 cancel 關閉", |
| 1960 | "WhaleAnimalScout": "喙鯨", |
| 1961 | "WhaleAnimalPatch": "港灣鼠海豚", |
| 1962 | "WhaleAnimalHarbor": "座頭鯨", |
| 1963 | "WhaleAnimalEcho": "領航鯨", |
| 1964 | "WhaleAnimalKeel": "抹香鯨", |
| 1965 | "WhaleAnimalLantern": "虎鯨", |
| 1966 | "WhaleAnimalPlain": "鯨", |
| 1967 | "WhaleJobScout": "研究", |
| 1968 | "WhaleJobPatch": "編碼", |
| 1969 | "WhaleJobHarbor": "協調", |
| 1970 | "WhaleJobEcho": "溝通", |
| 1971 | "WhaleJobKeel": "營運", |
| 1972 | "WhaleJobLantern": "審查", |
| 1973 | "WhaleJobPlain": "一般工作", |
| 1974 | "SessionMetricsTurn": "回合", |
| 1975 | "SessionMetricsTurns": "回合", |
| 1976 | "SessionMetricsStep": "步", |
| 1977 | "SessionMetricsSteps": "步", |
| 1978 | "SessionMetricsLlm": "LLM", |
| 1979 | "SessionMetricsTools": "工具呼叫", |
| 1980 | "SessionMetricsTtft": "TTFT 平均", |
| 1981 | "SessionMetricsTokensPerSecond": "平均 tok/s", |
| 1982 | "SessionMetricsCache": "快取命中", |
| 1983 | "SessionMetricsInput": "輸入", |
| 1984 | "SessionMetricsStatusLine": "工作階段指標：{metrics}", |
| 1985 | "StatusLabelRoute": "路由", |
| 1986 | "StatusLabelDirectory": "目錄", |
| 1987 | "StatusLabelProjectDocs": "專案文件", |
| 1988 | "StatusLabelMode": "模式", |
| 1989 | "StatusLabelSafety": "安全性", |
| 1990 | "StatusLabelMcp": "MCP", |
| 1991 | "StatusLabelFleet": "Fleet", |
| 1992 | "StatusLabelContextWindow": "上下文視窗", |
| 1993 | "StatusLabelWindowSource": "視窗來源", |
| 1994 | "StatusLabelWindowOverride": "視窗覆寫", |
| 1995 | "StatusLabelCatalog": "目錄", |
| 1996 | "StatusLabelCloudFacts": "雲端事實", |
| 1997 | "StatusLabelSession": "工作階段", |
| 1998 | "StatusLabelSessionTokens": "工作階段 token", |
| 1999 | "StatusLabelSessionCost": "工作階段費用", |
| 2000 | "StatusLabelToolOutputs": "工具輸出", |
| 2001 | "StatusRouteSummary": "{provider} · {model} · 思考 {reasoning}", |
| 2002 | "StatusProjectDocsNone": "無專案文件", |
| 2003 | "StatusPostureSummary": "{mode} · 核准 {approval} · {shell} · {trust}", |
| 2004 | "StatusShellOn": "Shell 已開啟", |
| 2005 | "StatusShellOff": "Shell 已關閉", |
| 2006 | "StatusTrustedWorkspace": "已信任工作區", |
| 2007 | "StatusWorkspace": "工作區", |
| 2008 | "StatusApprovalAsk": "詢問", |
| 2009 | "StatusApprovalAuto": "自動審核", |
| 2010 | "StatusApprovalFullAccess": "完整存取", |
| 2011 | "StatusApprovalNever": "永不允許", |
| 2012 | "StatusMcpConfigured": "已設定 {count} 個", |
| 2013 | "StatusFleetDrifted": "{fleet} · {count} 條已儲存路由不在目前目錄中：{ids}", |
| 2014 | "StatusModelNotInRoster": "模型 {model} 不在 {provider} 目前的模型清單中——已保留固定設定；它可能仍可回應", |
| 2015 | "StatusContextUsage": "已使用 {percent}%（{used} / {max} token）", |
| 2016 | "StatusContextSourceConfigured": "設定值", |
| 2017 | "StatusContextSourceConfiguredModel": "設定值（依模型）", |
| 2018 | "StatusContextSourceProviderReported": "供應商回報", |
| 2019 | "StatusContextSourceKimiSafeFloor": "靜態 Kimi Code 安全下限", |
| 2020 | "StatusContextSourceCatalog": "目錄", |
| 2021 | "StatusContextSourceModelHint": "模型名稱提示（未驗證）", |
| 2022 | "StatusContextSourceFallback": "後備值（未驗證）", |
| 2023 | "StatusWindowOverrideProvider": "config.toml 中 [providers.{table}] 的 context_window", |
| 2024 | "StatusWindowOverrideActiveProvider": "config.toml 中目前供應商表格的 `context_window`", |
| 2025 | "StatusSessionNotSaved": "尚未儲存", |
| 2026 | "StatusSessionSummary": "{session} · {cells} 個儲存格 · {messages} 則 API 訊息", |
| 2027 | "StatusSessionTokensSummary": "輸入 {input} · 輸出 {output} · 總計 {total} · {cache}", |
| 2028 | "StatusCacheNotReported": "未回報快取", |
| 2029 | "StatusCacheSummary": "快取命中 {hit} / 未命中 {miss}", |
| 2030 | "StatusToolRawPressure": "{count} 個原始輸出超出上限（約 {chars} 字元），增加上下文壓力", |
| 2031 | "StatusToolCompactReceipts": "{count} 個精簡回執", |
| 2032 | "StatusToolArtifacts": "{count} 個成品，已儲存 {bytes}", |
| 2033 | "StatusToolNone": "未追蹤大型輸出", |
| 2034 | "StatusSafetyReadOnlyUnenforced": "此平台無 OS 沙箱（已要求唯讀但未強制執行），網路關閉", |
| 2035 | "StatusSafetyReadOnly": "沙箱唯讀，網路關閉", |
| 2036 | "StatusSafetyWorkspaceWriteUnenforcedNetworkOn": "此平台無 OS 沙箱（已要求 workspace-write 但未強制執行），網路開啟", |
| 2037 | "StatusSafetyWorkspaceWriteUnenforcedNetworkOff": "此平台無 OS 沙箱（已要求 workspace-write 但未強制執行），網路關閉要求也未強制執行", |
| 2038 | "StatusSafetyWorkspaceWriteNetworkOn": "沙箱為 workspace-write，網路開啟", |
| 2039 | "StatusSafetyWorkspaceWriteNetworkOff": "沙箱為 workspace-write，網路關閉", |
| 2040 | "StatusSafetyDisabled": "沙箱已停用，網路不受限", |
| 2041 | "StatusSafetyDisabledSetuidBlocked": "沙箱已停用，網路不受限；sudo/setuid 仍被封鎖（no-new-privs）", |
| 2042 | "StatusSafetyDisabledSetuidAllowed": "沙箱已停用，網路不受限；sudo/setuid 已放寬", |
| 2043 | "StatusSafetyExternal": "外部沙箱，網路控制委派給主機", |
| 2044 | "StatusPointers": "每回合 token：/tokens · 頁尾項目：/statusline", |
| 2045 | "AutoReviewReceiptGuardianAllowed": "Auto-Review 已允許 '{tool}'（風險 {risk}，模型守護者）：{reason}", |
| 2046 | "AutoReviewReceiptGuardianDenied": "Auto-Review 已拒絕 '{tool}'（風險 {risk}，模型守護者）：{reason}", |
| 2047 | "AutoReviewReceiptGuardianUnavailable": "Auto-Review 無法審查 '{tool}'（{reason}）；已拒絕，故障關閉", |
| 2048 | "AutoReviewReceiptDeterministicBlocked": "Auto-Review 已封鎖 '{tool}'（確定性策略）：{reason}", |
| 2049 | "AutoReviewReceiptHeld": "Auto-Review 未暫停即擱置了 '{tool}'；已拒絕（需要人工決定 — 切換到 Ask）", |
| 2050 | "FooterHintEscInterrupt": "Esc 中斷", |
| 2051 | "PostureHintEnterAgain": "再按 {enter} 立即傳送 · {steer} 引導", |
| 2052 | "PermissionsPostureHeader": "目前存取層級：{posture}", |
| 2053 | "PermissionsPostureAsk": "Ask：會改變權限、成本、範圍或結果的 tool 呼叫會開啟提示；已證明安全的唯讀呼叫無需提示即可執行。上面的 ask 規則始終強制提示。", |
| 2054 | "PermissionsPostureAuto": "Auto-Review：從不開啟提示。確定性策略允許已證明安全的呼叫，並硬性封鎖類似發佈或破壞性的背景工作；無法證明安全的呼叫交給一次性模型守護者，其給出理由後允許或拒絕（高或嚴重風險絕不自動執行；審查失敗即拒絕，故障關閉）。需要人工決定的擱置會被拒絕而非隱藏。每個此類決定都會作為備註寫入對話記錄和稽核日誌。", |
| 2055 | "PermissionsPostureBypass": "Full Access：普通 tool 呼叫無需提示即可執行。不可繞過的安全、儲存庫規則和託管策略擱置會作為硬性封鎖故障關閉，而不是開啟提示。", |
| 2056 | "PermissionsPostureNever": "never：僅執行被視為安全/唯讀的 tool；其他一切均在不提示的情況下被封鎖。", |
| 2057 | "PermissionsReceiptsNote": "未經提示做出的決定（Auto-Review 守護者裁定、封鎖和擱置）會作為對話記錄備註顯示，並寫入 {audit_path} 的稽核日誌。Full Access 只能透過 Shift+Tab 或 /config 有意選擇，絕不會由規則選擇。", |
| 2058 | "AgentFocusOpened": "已聚焦 {agent}。之後的訊息將送給此代理；按 Esc 返回主對話。", |
| 2059 | "AgentFocusClosed": "已返回主對話。", |
| 2060 | "AgentFocusBanner": "{agent} · {status}", |
| 2061 | "AgentFocusComposerChip": "→ {agent}", |
| 2062 | "AgentFocusPlaceholder": "傳訊給 {agent} · Esc 返回主對話", |
| 2063 | "AgentFocusNoTranscript": "{agent} 尚無對話紀錄。代理開始交流後會顯示於此。", |
| 2064 | "AgentFocusOmitted": "記憶體中的對話紀錄省略了較早的 {count} 則訊息。", |
| 2065 | "AgentFocusResult": "結果", |
| 2066 | "AgentFocusStopReason": "停止原因", |
| 2067 | "AgentFocusFollowUpDelivered": "已為 {agent} 排入佇列：它會在下一回合讀取此訊息。", |
| 2068 | "AgentFocusFollowUpQueued": "已為 {agent} 排入佇列", |
| 2069 | "AgentFocusFollowUpContinued": "{agent} 已完成；已在新分支（{target}）上繼續。此檢視現在跟隨該分支。", |
| 2070 | "AgentFocusFollowUpFailed": "無法傳送給 {agent}：{reason}", |
| 2071 | "FooterHintForAgents": "代理", |
| 2072 | "FooterHintToManage": "管理", |
| 2073 | "AgentRailQueuedCount": "{count} 則排隊", |
| 2074 | "WorkbarSoFar": "目前 {done}/{total}", |
| 2075 | "WorkbarLargeWorkflow": "大型工作流程", |
| 2076 | "WorkbarMoreRuns": "還有 {count} 個", |
| 2077 | "WorkflowLineStarted": "已開始", |
| 2078 | "WorkflowLineFinished": "已完成", |
| 2079 | "WorkflowLineFinishedWithGaps": "已完成但有缺口", |
| 2080 | "WorkflowLineFailed": "失敗", |
| 2081 | "WorkflowLineStopped": "已停止", |
| 2082 | "WorkflowLineAgents": "{done}/{total} 個代理", |
| 2083 | "AgentFocusPosture": "{role} · {write} · {network} · {shell}", |
| 2084 | "AgentFocusPostureWrites": "可寫入", |
| 2085 | "AgentFocusPostureReadOnly": "唯讀", |
| 2086 | "AgentFocusPostureNetwork": "可連網", |
| 2087 | "AgentFocusPostureNoNetwork": "無網路", |
| 2088 | "AgentFocusPostureShellFull": "可用 shell", |
| 2089 | "AgentFocusPostureShellReadOnly": "唯讀 shell", |
| 2090 | "AgentFocusPostureShellNone": "無 shell", |
| 2091 | "GoalReceiptSet": "已設定目標：「{objective}」 · /goal 查看進度 · /goal pause 或 /goal clear 停止", |
| 2092 | "GoalReceiptSetOperate": "◆ 已設定目標 · Operate 會持續工作直到驗證完成 · /goal 可編輯", |
| 2093 | "GoalControlAccepted": "目標控制已儲存；將在下一個安全邊界套用。", |
| 2094 | "GoalControlRuntimeUnavailable": "目標控制已儲存，但執行階段目前無法使用。重新啟動後將還原此狀態。", |
| 2095 | "GoalStatusIdleHint": "目前未執行 — 傳送訊息或 /goal resume 以繼續", |
| 2096 | "CmdAutoDescription": "以自動審核工作——不必先設目標或工作流程", |
| 2097 | "AutoReceiptOn": "已開啟自動審核。/goal 盯住一個目標；/workflow 執行腳本。", |
| 2098 | "AutoReceiptPlanNote": "切換到 Work 或 Operate 之前，Plan 仍為唯讀。", |
| 2099 | "GoalContinuationWaiting": "目標執行中 · {delay} 後開始下一回合 · 按 Esc、Ctrl+C 或使用 /goal pause 可停止待執行的繼續操作", |
| 2100 | "GoalContinuationReady": "目標繼續操作已就緒；佇列中的控制指令會在下一回合之前執行。", |
| 2101 | "GoalContinuationStopped": "已停止待執行的目標繼續操作；目標仍保持執行狀態。", |
| 2102 | "McpCapabilitiesAdvertised": "已宣告的能力：{capabilities}", |
| 2103 | "McpCapabilitiesLegacyFallback": "已宣告的能力：未提供；使用舊版探索後援", |
| 2104 | "McpCapabilitiesNotObserved": "已宣告的能力：伺服器未連線，尚未觀測", |
| 2105 | "PickerActionTestConnection": "測試連線", |
| 2106 | "ProviderCustomFormBaseUrl": "基礎 URL", |
| 2107 | "ProviderCustomFormModel": "預設模型", |
| 2108 | "ProviderCustomFormHint": "OpenAI 相容端點。請儲存環境變數名，不要儲存原始金鑰。", |
| 2109 | "ProviderConnectionChecked": "供應商已接受該金鑰。", |
| 2110 | "ProviderConnectionCheckedPickModel": "供應商已接受該金鑰。現在請選擇預設使用的模型。", |
| 2111 | "ProviderTestConnectionNeedKey": "尚未儲存 {provider} 的 API 金鑰。請先輸入金鑰，再按 T 測試連線。", |
| 2112 | "ProviderTestConnectionFailed": "{provider} 連線檢查失敗：{error}", |
| 2113 | "ProviderTestConnectionNoEndpoint": "{provider} 沒有 /models 端點，因此未探測可達性。", |
| 2114 | "OperateBoardHeader": "Operate {id} [{status}] 節奏={pace} 寫手={writers}", |
| 2115 | "OperateBoardBurnObserved": "消耗 觀測 ${actual}/時 vs 目標 ${target}/時", |
| 2116 | "OperateBoardBurnNoCap": "消耗 無上限", |
| 2117 | "OperateBoardDirectionEmpty": "方向 (為空 — 閒置受阻)", |
| 2118 | "OperateBoardDirectionLine": "方向 {line}", |
| 2119 | "OperateBoardPlanMissing": "leadPlan (無 — 代理未獲准入)", |
| 2120 | "OperateBoardPlanHeader": "協調者計畫 id 負責人 開始 時長 預估$ 相依 標題", |
| 2121 | "OperateBoardGantt": "甘特圖 時間 →", |
| 2122 | "ConfigCategoryAppearance": "外觀", |
| 2123 | "ConfigCategoryModelsProviders": "模型與供應商", |
| 2124 | "ConfigCategoryFleet": "Fleet", |
| 2125 | "ConfigCategoryWork": "工作", |
| 2126 | "ConfigCategoryToolsMcp": "工具與 MCP", |
| 2127 | "ConfigCategoryTrust": "信任", |
| 2128 | "ConfigCategoryMotion": "動態效果", |
| 2129 | "ConfigCategoryAdvanced": "進階", |
| 2130 | "ConfigFactCurrent": "目前", |
| 2131 | "ConfigFactSaved": "已儲存", |
| 2132 | "ConfigFactStartup": "啟動時", |
| 2133 | "ConfigFactSource": "來源", |
| 2134 | "ConfigFactScope": "範圍", |
| 2135 | "ConfigFactApply": "生效", |
| 2136 | "ConfigFactKind": "類型", |
| 2137 | "ConfigFactAvailable": "可用性", |
| 2138 | "ConfigFactObserved": "觀測值", |
| 2139 | "ConfigFactOpens": "開啟", |
| 2140 | "ConfigLaneUnobserved": "本工作階段未觀測", |
| 2141 | "ConfigSourceSession": "工作階段", |
| 2142 | "ConfigSourceUserSettings": "settings.toml", |
| 2143 | "ConfigSourceConfig": "config.toml", |
| 2144 | "ConfigSourceManaged": "受管政策", |
| 2145 | "ConfigApplyEffectiveNow": "立即生效", |
| 2146 | "ConfigApplyOnSave": "儲存後生效", |
| 2147 | "ConfigApplyNextSession": "下次工作階段", |
| 2148 | "ConfigApplyRestart": "需要重新啟動", |
| 2149 | "ConfigApplyReadOnly": "唯讀", |
| 2150 | "ConfigApplyReload": "已儲存 · 執行中的伺服器需執行 `/mcp reload`", |
| 2151 | "ConfigApplyUiNowEngineRestart": "介面立即生效 · 引擎工具需重新啟動", |
| 2152 | "ConfigKindToggle": "切換", |
| 2153 | "ConfigKindChoice": "選項", |
| 2154 | "ConfigKindNumber": "數字", |
| 2155 | "ConfigKindText": "文字", |
| 2156 | "ConfigKindAction": "動作", |
| 2157 | "ConfigKindReadOnly": "唯讀", |
| 2158 | "ConfigRowActionNote": "動作 · 非持久化設定", |
| 2159 | "ConfigRowDiagnosticNote": "觀測回條 · 此處不可編輯", |
| 2160 | "ConfigNavHint": "←/→ 或 Tab 切換類別 · ↑/↓ 切換設定", |
| 2161 | "ConfigActivateAgain": "按 Enter 或再次點選：", |
| 2162 | "ConfigSearchLabel": " 搜尋: ", |
| 2163 | "ConfigEditChooseLabel": "選擇：", |
| 2164 | "ConfigChoiceFooter": " ↑/↓ 或點選選擇 · Enter/套用 · Esc/取消 · 1-9 跳至 ", |
| 2165 | "ConfigChoiceFooterCompact": " ↑/↓ 或點選 · Enter/套用 · Esc ", |
| 2166 | "ConfigEditorApply": "套用", |
| 2167 | "ConfigEditorCancel": "取消", |
| 2168 | "ConfigLaneUnavailable": "無法使用：{error}", |
| 2169 | "ConfigSourceEnvironment": "環境覆寫 ({name})", |
| 2170 | "ConfigSourceTerminal": "終端機覆寫 ({name})", |
| 2171 | "ConfigDescriptionDefault": "按 Enter 更改值 · Esc 關閉。徽章顯示範圍。", |
| 2172 | "ConfigValueOn": "開", |
| 2173 | "ConfigValueOff": "關", |
| 2174 | "ConfigValueProviderDefault": "供應商預設", |
| 2175 | "ConfigChoiceAsk": "詢問", |
| 2176 | "ConfigChoiceAutoReview": "自動審核", |
| 2177 | "ConfigChoiceUseTuiDefault": "使用 TUI 權限預設值", |
| 2178 | "ConfigChoiceFullAccess": "完整存取", |
| 2179 | "ConfigChoiceNever": "永不", |
| 2180 | "ConfigChoiceModeAct": "Work", |
| 2181 | "ConfigChoiceModePlan": "Plan（唯讀）", |
| 2182 | "ConfigChoiceModeOperate": "Operate", |
| 2183 | "ConfigChoicePlacementTop": "頂部", |
| 2184 | "ConfigChoicePlacementBottom": "底部欄", |
| 2185 | "ConfigChoicePlacementLeft": "左側欄", |
| 2186 | "ConfigChoicePlacementRight": "右側欄", |
| 2187 | "ConfigChoiceRailTasks": "任務", |
| 2188 | "ConfigChoiceRailAgents": "代理", |
| 2189 | "ConfigChoiceRailContext": "上下文", |
| 2190 | "ConfigChoiceStatusCw": "Codewhale 標記", |
| 2191 | "ConfigChoiceStatusDots": "動畫圓點", |
| 2192 | "ConfigChoiceDiffFull": "完整差異", |
| 2193 | "ConfigChoiceDiffSummary": "摘要", |
| 2194 | "ConfigChoiceDetailAsk": "在可能造成重大變更的工具執行前詢問。", |
| 2195 | "ConfigChoiceDetailAutoReview": "自動審核工具風險，需要你決定時才詢問。", |
| 2196 | "ConfigChoiceDetailUseTuiDefault": "移除根設定覆寫，使用已儲存的 TUI 權限選擇。", |
| 2197 | "ConfigChoiceDetailFullAccess": "不經核准提示即可執行工具；工作區規則仍然適用。", |
| 2198 | "ConfigChoiceDetailNever": "封鎖所有需要核准的工具。", |
| 2199 | "ConfigChoiceDetailModeAgent": "以可協作並使用工具的狀態開始。", |
| 2200 | "ConfigChoiceDetailModePlan": "在唯讀的規劃工作區中開始。", |
| 2201 | "ConfigChoiceDetailModeOperate": "Operate 把你的提示詞變成目標並行推進：可拆分的任務流交給背景代理，驗證後才會停止。", |
| 2202 | "ConfigChoiceDetailPlacementTop": "在對話記錄上方顯示任務、待辦和代理。", |
| 2203 | "ConfigChoiceDetailPlacementBottom": "在輸入框下方顯示任務、待辦和代理。", |
| 2204 | "ConfigChoiceDetailPlacementLeft": "終端機夠寬時，在左側任務面板中顯示任務、待辦和代理。", |
| 2205 | "ConfigChoiceDetailPlacementRight": "終端機夠寬時，在右側任務面板中顯示任務、待辦和代理。", |
| 2206 | "ConfigChoiceDetailPlacementOff": "完全隱藏側欄。", |
| 2207 | "ConfigChoiceDetailRailTasks": "任務面板顯示即時的任務 / 待辦 / 代理清單。", |
| 2208 | "ConfigChoiceDetailRailAgents": "任務面板顯示代理和扇出狀態。", |
| 2209 | "ConfigChoiceDetailRailContext": "任務面板顯示工作區、token 和成本上下文。", |
| 2210 | "ConfigChoiceDetailLowMotionOn": "停止即時狀態的動態效果，不改變模型輸出。", |
| 2211 | "ConfigChoiceDetailLowMotionOff": "允許其他外觀設定所選的動態效果。", |
| 2212 | "ConfigChoiceDetailFancyOn": "如實為工具、狀態和海洋的即時狀態加上動畫。", |
| 2213 | "ConfigChoiceDetailFancyOff": "讓即時狀態標記和海洋效果保持靜止。", |
| 2214 | "ConfigChoiceDetailShowThinkingOn": "在對話記錄中顯示模型推理區塊。", |
| 2215 | "ConfigChoiceDetailShowThinkingOff": "隱藏模型推理；回答和工具仍然可見。", |
| 2216 | "ConfigChoiceDetailThinkingHighlightOn": "填滿模型推理的背景。", |
| 2217 | "ConfigChoiceDetailThinkingHighlightOff": "保留虛線推理側欄和斜體文字，不填滿背景。", |
| 2218 | "ConfigHintModel": "本工作階段即時路由的模型；按 Enter 開啟 /model", |
| 2219 | "ConfigHintFastModel": "當供應商有已知的同系模型時，供 Auto 路由和 model_strength=faster 使用", |
| 2220 | "ConfigHintProvider": "憑證、模型和端點一起切換", |
| 2221 | "ConfigHintApprovalMode": "僅本工作階段：詢問 | 自動審核 | 完整存取", |
| 2222 | "ConfigHintPermissionPosture": "新工作階段的預設值：詢問 | 自動審核 | 完整存取", |
| 2223 | "ConfigHintApprovalPolicy": "選擇完整存取會解除原始設定覆寫", |
| 2224 | "ConfigHintManagedApprovalPolicy": "專案、設定檔、環境、受管設定或組織要求控制此值", |
| 2225 | "ConfigHintManagedAllowShell": "專案、設定檔、環境或受管設定控制 shell 存取", |
| 2226 | "ConfigHintAllowShell": "開啟後在 Work 模式中提供 shell 工具；權限規則仍然適用", |
| 2227 | "ConfigHintComposerMultilineMode": "關：Enter 送出，Shift+Enter 換行；開：Enter 換行，Shift+Enter 送出", |
| 2228 | "ConfigHintBooleanValues": "on/off, true/false, yes/no, 1/0", |
| 2229 | "ConfigHintDensity": "compact | comfortable | spacious", |
| 2230 | "ConfigHintInlineDiffs": "full | summary | off；精確變更仍在 Alt/Option+V 詳情中", |
| 2231 | "ConfigHintToolCollapse": "compact | expanded | calm", |
| 2232 | "ConfigHintBackgroundColor": "#RRGGBB | default", |
| 2233 | "ConfigHintWorkSurfacePlacement": "側欄需要 Ocean 模式且至少 72 欄", |
| 2234 | "ConfigHintRailPanel": "側欄顯示的面板", |
| 2235 | "ConfigHintWorkSurfaceTopHeight": "5..=16 列 · 也可拖曳分隔線調整", |
| 2236 | "ConfigHintWorkSurfaceSideWidth": "26..=80 欄 · 也可拖曳分隔線調整", |
| 2237 | "ConfigHintBaseUrl": "目前端點回執（唯讀）· 使用 /provider 一起切換供應商、憑證和端點", |
| 2238 | "ConfigHintContextWindow": "最大上下文長度 / 上下文大小（token）· 在 config.toml 設定 `[providers.<name>] context_window`", |
| 2239 | "ConfigHintEffectiveContextWindow": "已解析的最大上下文長度 / 上下文大小 · 決定壓縮、壓力和預檢", |
| 2240 | "ConfigHintCostCurrency": "usd | cny", |
| 2241 | "ConfigHintCalmMode": "讓對話記錄裝飾和工具詳情更安靜；與即時動態效果無關", |
| 2242 | "ConfigHintLowMotion": "開啟後覆寫即時狀態動態效果；模型輸出不變", |
| 2243 | "ConfigHintFancyAnimations": "開啟後如實為工具、狀態和海洋的即時狀態加上動畫", |
| 2244 | "ConfigHintShowThinking": "在聊天中顯示或隱藏模型推理；任務清單保持簡潔", |
| 2245 | "ConfigHintThinkingDefaultExpanded": "預設展開模型推理；Space 仍可切換每個區塊", |
| 2246 | "ConfigHintThinkingPreviewLines": "摺疊的已完成思考預覽列數（預設 2；0=僅標題；10=舊式傾印）", |
| 2247 | "ConfigHintHelpExpandGroups": "開啟說明/快捷鍵時展開所有群組；預設摺疊長尾", |
| 2248 | "ConfigHintPinLastPrompt": "最後一則使用者提示捲出畫面時釘選在對話記錄頂部", |
| 2249 | "ConfigHintThinkingHighlight": "填滿模型推理背景；關閉時虛線側欄仍可見", |
| 2250 | "ConfigHintSynchronizedOutput": "auto | on | off；終端機重繪節奏，不是模型速度", |
| 2251 | "ConfigHintDefaultMode": "act (agent) | plan | operate", |
| 2252 | "ConfigHintMaxHistory": "整數（允許 0）", |
| 2253 | "ConfigHintAutoCompactThreshold": "10..=100 · 壓縮門檻：觸發自動壓縮時占可用上下文長度的百分比", |
| 2254 | "ConfigHintDefaultModel": "僅 DeepSeek 的舊版後備；其他供應商使用上方按供應商劃分的模型", |
| 2255 | "ConfigHintReasoningEffort": "default 會恢復該模型自身的預設值；常開思考模型沒有 off", |
| 2256 | "ConfigHintMcpOpen": "開啟 MCP 管理器 · 連線 / 重新連線 / 重新驗證 / 診斷", |
| 2257 | "ConfigHintMcpReconnect": "重新連線 MCP · /mcp reload", |
| 2258 | "ConfigHintMcpDiagnose": "診斷 MCP · /mcp validate", |
| 2259 | "ConfigHintPluginsOpen": "開啟外掛 · 信任、啟用或診斷", |
| 2260 | "ConfigHintMcpConfigPath": "mcp.json 的路徑", |
| 2261 | "ConfigHintFleetMaxSpawnDepth": "0 禁止巢狀代理；預設 3；上限 8", |
| 2262 | "ConfigHintFeatureSubagents": "唯讀的功能開關狀態；/fleet setup 是面向使用者的路徑", |
| 2263 | "ConfigHintFeatureWebSearch": "網頁搜尋工具的唯讀功能開關狀態", |
| 2264 | "ConfigHintFeatureApplyPatch": "修補程式編輯工具的唯讀功能開關狀態", |
| 2265 | "ConfigHintFeatureMcp": "MCP 工具的唯讀功能開關狀態", |
| 2266 | "ConfigHintFeatureExecPolicy": "執行政策工具的唯讀功能開關狀態", |
| 2267 | "ConfigHintFeatureVisionModel": "視覺/模型影像支援的測試版功能開關", |
| 2268 | "ConfigHintGoalCommand": "/goal 追蹤目標、預算及狀態", |
| 2269 | "ConfigHintWorkflow": "/workflow 執行帶扇出/扇入執行卡片的腳本化操作", |
| 2270 | "LaunchMenuNewWorktree": "新增工作樹", |
| 2271 | "LaunchMenuResume": "恢復工作階段", |
| 2272 | "LaunchMenuQuit": "結束", |
| 2273 | "LaunchNoticeClaude": "偵測到 Claude Code。用 /import-claude 檢視；每項變更都需你確認。", |
| 2274 | "LaunchNewSession": "新增工作階段", |
| 2275 | "LaunchRecentHeading": "最近", |
| 2276 | "LaunchHelpLine": "/help 檢視指令 · {dock} 開啟任務面板", |
| 2277 | "LaunchSeeAllSessions": "查看全部工作階段…", |
| 2278 | "LaunchNoRecentSessions": "暫無最近工作階段 — 在下方輸入以開始。", |
| 2279 | "LaunchResumeFailed": "恢復失敗：{error}", |
| 2280 | "ReceiptSessionHooks": "掛鉤 {count}", |
| 2281 | "AutomationEditorNew": "新增自動化", |
| 2282 | "AutomationEditorEdit": "編輯自動化", |
| 2283 | "AutomationEditorSchedule": "執行排程", |
| 2284 | "AutomationEditorDaily": "每天", |
| 2285 | "AutomationEditorWeekly": "每週", |
| 2286 | "AutomationEditorHourly": "每小時", |
| 2287 | "AutomationEditorOnce": "僅一次", |
| 2288 | "AutomationEditorCustom": "自訂", |
| 2289 | "AutomationEditorTime": "時間 (HH:MM)", |
| 2290 | "AutomationEditorDate": "日期 (YYYY-MM-DD)", |
| 2291 | "AutomationEditorDays": "星期", |
| 2292 | "AutomationEditorLocalTime": "時區：本機 ({zone})", |
| 2293 | "AutomationEditorProvider": "選擇模型會固定其供應商。目前設定：{provider}。", |
| 2294 | "AutomationEditorDefaultModel": "預設模型", |
| 2295 | "AutomationEditorInheritedProvider": "執行階段預設值", |
| 2296 | "AutomationEditorEnabled": "啟用", |
| 2297 | "AutomationEditorControls": "Tab 切換欄位 · Enter 編輯 · ↑↓ 調整 · Ctrl+A 全選", |
| 2298 | "AutomationEditorPromptControls": "Enter 換行 · Tab 下一欄位 · Ctrl+A 全選", |
| 2299 | "AutomationEditorSaveFailed": "無法儲存：{error}", |
| 2300 | "AutomationEditorBusy": "自動化儲存空間忙碌中。請重新儲存。", |
| 2301 | "AutomationEditorSaved": "已儲存 {name}", |
| 2302 | "AutomationEditorPreviewUnavailable": "下次執行時間不明；將保留現有排程", |
| 2303 | "AutomationEditorConflict": "自動化已變更。請取消後重新開啟。", |
| 2304 | "AutomationEditorInvalidWorkspace": "請選擇現有的工作目錄。", |
| 2305 | "AutomationEditorModelControls": "輸入篩選 · ↑↓ 移動 · Enter 選擇 · Esc 返回", |
| 2306 | "AutomationEditorPausedPreview": "已暫停 · 無排定的執行", |
| 2307 | "AutomationEditorInvalidSchedule": "無效的排程：{error}", |
| 2308 | "AutomationEditorMonday": "週一", |
| 2309 | "AutomationEditorTuesday": "週二", |
| 2310 | "AutomationEditorWednesday": "週三", |
| 2311 | "AutomationEditorThursday": "週四", |
| 2312 | "AutomationEditorFriday": "週五", |
| 2313 | "AutomationEditorSaturday": "週六", |
| 2314 | "AutomationEditorSunday": "週日", |
| 2315 | "CostReasonNotMoney": "不按 token 計費", |
| 2316 | "CostReasonBillingUnknown": "計費方式未知", |
| 2317 | "CostReasonEndpointUnknown": "未確認端點", |
| 2318 | "CostReasonRateMissing": "暫無費率", |
| 2319 | "CostReasonLiveUnverified": "即時費率未驗證", |
| 2320 | "CostReasonRetiredAlias": "模型別名已停用", |
| 2321 | "CostReasonTierMissing": "暫無對應計價級距", |
| 2322 | "CostReasonRoutingDependent": "尚未確認上游費率", |
| 2323 | "CostReasonCoverageMissing": "缺少已儲存的計費涵蓋記錄", |
| 2324 | "CostReasonTokenRateMissing": "缺少 token 類別費率", |
| 2325 | "CostReasonInvalidRate": "費率無效", |
| 2326 | "CostReasonCurrencyMissing": "缺少該幣別費率", |
| 2327 | "CostReasonUsageConflict": "token 計數衝突", |
| 2328 | "CostChipUnknown": "費用：未知（{reasons}）", |
| 2329 | "CostChipSubtotal": "小計 {amount} + 未知（{reasons}）", |
| 2330 | "CostChipSavedSubtotal": "已儲存小計 {amount} + 未知（{reasons}）", |
| 2331 | "CostChipLocal": "費用：本機", |
| 2332 | "CostChipAllowance": "用量：{plan}", |
| 2333 | "CostChipAllowancePercent": "用量：{plan} · {percent}%", |
| 2334 | "McpLoginInProgress": "MCP 伺服器「{server}」的 OAuth 登入已在進行中。按 {cancel_key} 取消。", |
| 2335 | "McpLoginStarting": "正在啟動 MCP 伺服器「{server}」的 OAuth 登入。按 {cancel_key} 取消。", |
| 2336 | "McpLoginBrowser": "正在瀏覽器中授權「{server}」。按 {cancel_key} 取消。{url}", |
| 2337 | "McpLoginStored": "已儲存 MCP 伺服器「{server}」的 OAuth 憑證。執行 {command} 重新連線。", |
| 2338 | "McpLoginFailed": "MCP 伺服器「{server}」的 OAuth 登入失敗：{error}", |
| 2339 | "McpLoginCancelled": "已取消 MCP 伺服器「{server}」的 OAuth 登入。", |
| 2340 | "McpLoginHandshakeTimeout": "OAuth 探索或註冊逾時；請重試登入。", |
| 2341 | "McpLoginServerNotFound": "找不到 MCP 伺服器「{server}」。", |
| 2342 | "McpDiagnosisUnobserved": "此工作階段尚未觀測到 MCP 伺服器「{server}」的連線狀態。執行 {command} 查看目前連線池。", |
| 2343 | "McpDiagnosisSummary": "MCP 伺服器「{server}」——上次觀測：{state}；傳輸方式 {transport}；{tools} 個工具、{resources} 個資源、{prompts} 個提示。", |
| 2344 | "McpDiagnosisLastError": "上次錯誤：{error}。", |
| 2345 | "McpDiagnosisNext": "下一步：{command}。", |
| 2346 | "McpStateDisabled": "已停用", |
| 2347 | "McpStateAuthorizationRequired": "需要授權", |
| 2348 | "McpStateConnecting": "連線中", |
| 2349 | "McpStateFailed": "連線失敗", |
| 2350 | "McpStateDisconnected": "未連線", |
| 2351 | "RuntimeStoreRecovered": "對話已復原至新的執行階段儲存空間。先前的執行階段工作、核准及自動化未復原。", |
| 2352 | "ResumeExactSessionHint": "要繼續此工作階段，請執行 {command}", |
| 2353 | "ResumeSavedSessionHint": "要選擇已儲存的工作階段，請執行 {command}", |
| 2354 | "GoalProgressLabel": "目標", |
| 2355 | "GoalProgressReceipt": "已回報進度 {percent}% {bar}", |
| 2356 | "GoalProgressNow": "L 目前 {note}", |
| 2357 | "GoalProgressNext": " 下一步 {note}", |
| 2358 | "ConfigLabelContextualTips": "上下文提示", |
| 2359 | "ConfigHintContextualTips": "在相關操作後偶爾推薦指令；關閉後不再顯示提示。", |
| 2360 | "ContextualTipsNotSaved": "提示偏好已套用於本次工作階段，但無法儲存：{error}", |
| 2361 | "ConfigLabelNotificationQuiet": "靜默通知", |
| 2362 | "ConfigLabelNotificationSound": "通知音效", |
| 2363 | "ConfigLabelNotificationCondition": "何時通知", |
| 2364 | "ConfigLabelNotificationMethod": "通知方式", |
| 2365 | "ConfigLabelNotificationThreshold": "最短回合時間（秒）", |
| 2366 | "ConfigLabelNotificationSummary": "包含摘要", |
| 2367 | "ConfigLabelNotificationSubagents": "代理通知", |
| 2368 | "ConfigLabelNotificationTurnComplete": "回合完成", |
| 2369 | "ConfigLabelNotificationSubagentTerminal": "代理結束", |
| 2370 | "ConfigLabelNotificationApprovalNeeded": "需要核准", |
| 2371 | "ConfigLabelNotificationInputNeeded": "需要回答", |
| 2372 | "ConfigLabelNotificationElevationNeeded": "需要提升權限", |
| 2373 | "ConfigLabelNotificationModelNotify": "代理要求的通知", |
| 2374 | "ConfigLabelNotificationCompletionSound": "原有的完成提示音", |
| 2375 | "ConfigLabelNotificationSoundFile": "自訂音效檔案", |
| 2376 | "ConfigLabelNotificationEventSoundEnabled": "原有的事件提示音", |
| 2377 | "ConfigLabelNotificationEventSoundEvents": "原有的音效類別", |
| 2378 | "ConfigLabelNotificationEventSoundInterval": "音效重複間隔（毫秒）", |
| 2379 | "ConfigLabelNotificationEventSoundQuiet": "靜默原有的事件提示音", |
| 2380 | "ConfigHintNotificationPolicy": "立即生效。靜默、關閉通知、關注狀態、時間長度及類別設定也會控制音效。", |
| 2381 | "ConfigHintNotificationSound": "「鯨鳴」使用內建叫聲。「關」會關閉音效。「保留原有音效」會沿用先前的音效設定。", |
| 2382 | "ConfigHintNotificationLegacy": "通知音效設為「保留原有音效」時使用。", |
| 2383 | "ConfigChoiceNotificationWhale": "鯨鳴", |
| 2384 | "ConfigChoiceNotificationLegacy": "保留原有音效", |
| 2385 | "ConfigChoiceNotificationAlways": "一律", |
| 2386 | "ConfigChoiceNotificationUnfocused": "離開時", |
| 2387 | "ConfigChoiceNotificationNever": "永不", |
| 2388 | "ConfigChoiceNotificationFile": "自訂檔案", |
| 2389 | "ConfigChoiceNotificationBell": "系統鈴聲", |
| 2390 | "NotificationApprovalNeeded": "請核准或拒絕「{tool}」以繼續", |
| 2391 | "NotificationInputNeeded": "請回答終端機中的問題以繼續", |
| 2392 | "NotificationElevationNeeded": "請允許或拒絕為「{tool}」提升存取權限", |
| 2393 | "NotificationDecisionWebHint": "請在此處或網頁上作出決定。", |
| 2394 | "NotificationTurnFailed": "本回合失敗", |
| 2395 | "NotificationProviderFallback": "供應商發生可復原的錯誤，已切換至 {provider}（備用選項 {position}/{total}）。", |
| 2396 | "ApprovalNeverPostureBlocked": "已封鎖「{tool}」：此工作階段不允許使用需要核准的工具。", |
| 2397 | "NotificationWebApproved": "已在網頁上核准。", |
| 2398 | "NotificationWebDenied": "已在網頁上拒絕。", |
| 2399 | "NotificationInputSubmitFailed": "無法提交你的回答：{error}。請再試一次。", |
| 2400 | "PagerActionConfirm": "確認", |
| 2401 | "SelectionCopiedAsMarkdown": "已將所選內容複製為 Markdown（{count}）", |
| 2402 | "McpShowCachedWhileTurnRuns": "有回合正在執行；顯示最近已知的 MCP 快照。回合結束後重新執行 /mcp 可即時重新整理。", |
| 2403 | "McpShowUnavailableWhileTurnRuns": "有回合正在執行，尚未觀測到 MCP 快照。請於回合結束後重新執行 /mcp。", |
| 2404 | "McpLivePoolRefreshDeferredWhileTurnRuns": "有回合正在執行；即時 MCP 集區重新整理已延後。請於回合結束後執行 /mcp reload。", |
| 2405 | "McpRetryDeferredWhileTurnRuns": "目前回合正在執行；回合結束後將立即重新連線 {server}。", |
| 2406 | "McpRetryStarted": "正在連線 {server}…", |
| 2407 | "McpRetryConnected": "{server} 已連線：{tools} 個工具。", |
| 2408 | "McpRetryNeedsLogin": "{server} 需要登入：請執行 {command}。", |
| 2409 | "McpRetryFailed": "{server} 未能連線：{error}", |
| 2410 | "ExtensionsActionDisable": "停用", |
| 2411 | "ExtensionsActionReview": "審閱", |
| 2412 | "ExtensionsActionRemove": "移除", |
| 2413 | "ExtensionsStateOn": "已開啟", |
| 2414 | "ExtensionsStateOff": "已關閉", |
| 2415 | "ExtensionsStateNeedsReview": "待審閱", |
| 2416 | "ExtensionsReviewExplainer": "Codewhale 只有在你確認外掛的具體能力之後，才會執行它的技能、MCP 伺服器和掛鉤。按 Enter 開啟審閱。", |
| 2417 | "ExtensionsScopeGlobal": "全域", |
| 2418 | "ExtensionsScopeProject": "專案", |
| 2419 | "ExtensionsScopePlugin": "外掛：{plugin}", |
| 2420 | "ExtensionsRemoveArmed": "移除 {name}？再按一次 d 確認 · Esc 取消", |
| 2421 | "FleetReviewWorkspaceLimits": "{workspace} · 代理 {enabled}（同時執行 {concurrent}，啟動名額 {launch_slots}，已接納 {admitted}）· 遞迴深度：代理 {agent_depth} / Fleet {fleet_depth}（上限 {ceiling}）", |
| 2422 | "FleetReviewPolicy": "代理預設不設 token 上限 · API {api_secs} 秒，心跳 {heartbeat_secs} 秒。透過 Fleet → exec 啟動；/fleet workers（或 /subagents）顯示目前工作階段的代理；/fleet status 和 codewhale fleet status 讀取已儲存的 .codewhale/fleet.jsonl 歷史。", |
| 2423 | "SetupProjectPermissionsInvalid": "無法解析專案設定 {path}（{reason}）。該設定的權限限制未生效；此工作區將使用你的使用者預設值。", |
| 2424 | "SetupProjectPermissionsOverride": "專案設定包含 {fields}。預設組合儲存使用者預設值；專案設定仍可收緊此工作區的權限。", |
| 2425 | "WorkflowCountRunning": "{count} 執行中", |
| 2426 | "WorkflowCountDone": "{count} 已完成", |
| 2427 | "WorkflowCountFailed": "{count} 失敗", |
| 2428 | "WorkflowCountCancelled": "{count} 已取消", |
| 2429 | "WorkflowNoTasksYet": "尚無任務", |
| 2430 | "WorkflowSettledOfTotal": "{done}/{total} 已完成", |
| 2431 | "WorkflowPhaseCountOne": "{count} 個階段", |
| 2432 | "WorkflowPhaseCountMany": "{count} 個階段", |
| 2433 | "WorkflowPhaseOrdinal": "階段 {n}/{total}", |
| 2434 | "ModelPickerPinned": "已釘選 {route}", |
| 2435 | "ModelPickerUnpinned": "已取消釘選 {route}", |
| 2436 | "ModelPickerPinFailed": "無法更新釘選：{error}", |
| 2437 | "ModelPickerPinOrderUpdated": "已更新釘選模型的順序", |
| 2438 | "ModelPickerPinReorderFailed": "無法調整釘選順序：{error}", |
| 2439 | "ModelPickerReadinessRefreshed": "已重新整理模型就緒狀態 · 已重建目錄列", |
| 2440 | "ModelPickerOpenToRefresh": "開啟 /model 以重新整理就緒狀態和目錄", |
| 2441 | "ModelPickerPinnedChip": "已釘選", |
| 2442 | "AuthSignedInAs": "已以 {account} 身分登入 {provider}。", |
| 2443 | "AuthSignedInWithoutEmail": "已登入 {provider}（簽發者未提供帳戶電子郵件）。", |
| 2444 | "AuthReplacedPreviousSignInAs": "已取代先前的 Codewhale {provider} 登入（{account}）。", |
| 2445 | "AuthReplacedPreviousSignIn": "已取代先前的 Codewhale {provider} 登入。", |
| 2446 | "AuthSameAccountAsBefore": "這與先前是同一個帳戶；若要使用其他 {provider} 帳戶，請先在瀏覽器中登出該帳戶（或使用無痕視窗），然後重新登入。", |
| 2447 | "AuthEnvTokenOutranksSignIn": "此環境已設定 OPENAI_CODEX_ACCESS_TOKEN 或 CODEX_ACCESS_TOKEN，其優先順序高於本次登入；在取消設定之前，請求會繼續使用該權杖的帳戶。", |
| 2448 | "TranscriptThought": "思考完畢", |
| 2449 | "TranscriptThoughtFor": "思考耗時 {duration}", |
| 2450 | "PinnedPromptJumpToMessage": "跳轉到這則訊息" |
| 2451 | } |
| 2452 |